ECGS Toyota CV Bushing Install

Подписаться 1,2 тыс.

Просмотров 32 тыс.

50% 1

Installing ECGS (East Coast Gear Supply) CV axle bushing. This bushing eliminates the factory needle bearing. This bushing helps with problematic vibrations or growling noise associated with lift kits and increasing operating angle of the CV axle. This increase in operating angle creates an abnormal force on the OE bearing and causes premature failure.
Manufactures Description: One Sintered PTFE Bushing, metal backed, bronze inlaid, PTFE coated CV axle bushing for Toyota 8" front clamshell differential. Fits all 05 to current year model Tacoma, FJ Cruiser, and 03 up 4runner DOES NOT FIT AWD 4RUNNER AND FJ CRUISER. Replaces Driver side CV axle needle bearing with bushing to help control Vibration and shaft float common on these differentials. Replaces Needle Bearing Part # 90364-35010 and 90364-35008. This is for the drivers side ONLY, the passenger side uses a ball bearing. This is for the bushing ONLY, the removal tool is also an option to allow one to easily remove the stock needle Bearing.
Product Link eastcoastgearsupply.com/i-853...

Авто/Мото

Опубликовано:

29 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@joetousignant9130 3 года назад

Hey, the needle bearing wore out on a bone stock 06 Sequoia with 186,000 miles. Come over Saturday and bring your tools, I'll provide the beer and BBQ. You are a master.

@matthewbrown9160 Год назад

Awesome video on the replacement. I was racing against the rain in my drive way. Had to get this done this weekend on my daily driver, the front end was starting to make decent noise and vibrations. Thanks for including all the torque specs saved me having to look them up. Also you made this look easy.

@pagspro972 Год назад

Absolute best install video on this bushing that I've seen so far!

@b2200mlb Год назад

This video helped me out a ton! Hope I don't get burned for not replacing the seals. The inner ones looked good.

@rhughes004 3 года назад

Thank you for such a fantastic installation video. Can’t wait to do mine.

@wesleydavidson1691 2 года назад

Nice, professional and, super clean! Thank you!

@POVMechanic 2 года назад

Glad you liked it!

@BigCountry67 Год назад

This guy is a BOSS. Great work.

@turbobarrels 2 года назад

Very slick, great to watch those skills!

@POVMechanic 2 года назад

Glad you enjoyed it

@Ein-Stuck 3 года назад

The factory replacement does not fix the problem. Thanks for the tip!!

@useryggfdcc 3 года назад

Excellent job!

@marklee9413 3 месяца назад

Awesome job. Great video.

@finditfixitmechanics 2 года назад

Nice video, thanks for sharing!

@POVMechanic 2 года назад

Thanks for watching!

@shortythefrenchie 3 года назад

You are a legit mechanic my dude! you can work on any of my vehicles

@spikes1092 3 года назад

I hope all mechanics are this careful! He cleaned the diff and fished out some metal shavings. Im worried a shop wont treat my ride so nice

@inferno1770 2 года назад

Great work

@carni6319 2 года назад

Dang, you made that look easy.

@POVMechanic 2 года назад

Glad you enjoyed it!

@86steventura 2 года назад

Wtf…I just got quoted $1300 to get this done. These guys are crazy

@t.d.hughart5121 2 года назад

Great job

@StoverEnt 3 года назад

ECGS says there bushing lasts 500,000 miles, I’m in favor of this product.

@alsaysamone4148 2 года назад

awesome job, now I am just trying to get over the dizziness...

@highflyer8070 3 месяца назад

Nice to see a real mechanic at work. Really fast even when filming it. I like how you removed the tie rod, what brand tie rod removal tool are you using.

@MValeriu73 Год назад

SUPER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@watdaheck808 4 месяца назад

Great video...thx for sharing. Question...what kind of lube/grease (blue) did you use on the inside of the new seal? Likewise, what did you use on the outside (tube) of the seal?

@caydenthompson1878 Год назад

Is there a clip i have to remove when pulling out the axle?

@Michael-tx8zf Год назад

Were can I buy the bushes and tools to do the work myself I have a 2004 Toyota tundra left cv needs replaced no one near me has even heard not go back with a sleeve instead of the needle bearing

@labtop2350 2 года назад

What did you charge to get this done?

@irded0344 Год назад

Can i use pilot bearing puller to remove the needle bearing or do i have to buy the ecgs tool its backordered right now thanks

@harrydhanasar6389 2 года назад

Need to get a kit from ECGS bearing, axle seal, and removal tool ,as well installation tool, all for toyota hilux r h d 4x4 1kd engine type, how do I order it.need help to place order.

@dee151 6 месяцев назад

So only Driver side needs to be done? Will this kit work on a 2023 Tacoma? The link that is provided that you put up?

@fn6553 4 месяца назад

Is there a bushing on the pass. side? 98 4runnner has play on pass. side also. Thanks

@dacomental6109 11 месяцев назад

What is that little tank you used to spray something called and what did you spray?

@russellhall4277 Год назад

How do I find the size of the from diff on 2012 tacoma?

@thinkkops853 2 года назад

Question, I have a 2014 Tacoma with 180k miles, noticed my needle bearing is worn, front cv axle to diff has up and down motion, its not lifted, stock height, would you recommend I stick to the OE needle bearing or install this bushing.

@POVMechanic 2 года назад

I would recommend the ECGS bushing.

@stevanrose7439 11 месяцев назад

I’m wondering if you held the outer end of the cv shaft up it would maybe help to remove the shaft from the differential. Helping the c clip to relax while you hammer on the pry bar. Just wondering 💭. 🤔

@jeffroberts2279 4 месяца назад

I used a axle fork. Popped out in first wack !

@R4nsack 2 месяца назад

Can this be an issue on a non-lifted 05 4runner with 140k miles? I get vibration at ~65-70 MPH. Sometimes it vibrates a lot, sometimes a little.

@arachnopsycho3984 Год назад

What size is the axle nut?

@BigYellow1500 Год назад

I have a 2023 4Runner that I just did a level kit/ spacer in the front. Does the 4Runner have the same front diff as the Tacoma ? Meaning will I have the same needle bearing issue as the Tacoma but I’m my 4runner

@mysteriousoklahoma777 11 месяцев назад

yes...usually around 100-150k

@jfriday1ify 2 года назад

I recently did this on my 5th gen 4runner. I have the seal driver for the bearing. But where can I find that rubber seal driver at? I used a large brass punch to set the seal in by working it around with light taps, but I'd rather have the right tool for a tacoma that I plan to do soon.

@POVMechanic 2 года назад

So the one I used here I believe was a race driver that we machined to fit this. There are similar tools out there that install those seals the same way

@jfriday1ify 2 года назад

@@POVMechanic Thank you! I am literally looking at some race drivers on amazon right now. I have another seal sitting at home and I will measure and compare.

@BigYellow1500 Год назад

Hey I just got a 2023 4Runner and did the 1” spacer in front to level it out , would you recommend this or just diff drop spacers?

@jorgecordova6133 2 года назад

the bushing goes only on the driver side? Nice vid!

@bradhelfrich6602 2 года назад

Yes

@Jonboy4371 4 месяца назад

Does it only go on the driver side ?

@petermclaughlin7659 2 года назад

By not fixing or replacing the ECGS CV Bushing, what can happen?

@itunda5607 Год назад

Needles get sent into diff and will cost you 2750 to replace whole diff unless you’re under warranty and not lifted I know some dealerships will still change it if your truck is diff drop, since stock geometry is the same, there’s a TSB for it

@at1970 Год назад

Hi. Do you know if the nitro bushing is any good? Thanks

@timm1994 Год назад

From what I’ve read you’ll get a vibration or you can actually grab the inner portion of the cv axle and move it

@dannylewandowski2822 10 месяцев назад

Anytime you lift a vehicle more than 2” , you must do a diff drop. 2” is the rule of thumb I would say.

@skateinspace Год назад

put something in the diff to clog it so no metal pieces go into it if you break the needle bearing

@simonfacciani8522 2 года назад

This is just for the driver side right , a little confused if the passenger side has the same thing or not ??

@POVMechanic 2 года назад

Yes, just for the driver side. Passenger side uses a different bearing

@mattgordy2539 Год назад

What bearing does the passenger side use? Thinking I’m going to have to replace that as well.

@rodeminabuiney4347 Год назад

Apakah ada di jual di indonesia jg yah bushing bgtu

@jrdainvestor8304 Год назад

Where are you located? Im in north/central California looking for a shop to do this. Got a quote from 2 shops one $500 other $800 labor alone. Seems preety steep to me. If im gonna that much id rather have the dealership do it

@Jostln Год назад

paying 250 for it this weekend

@jrdainvestor8304 Год назад

@@Jostln the cheapest reputable shop in my area is charging $285 labor only. I need to provide the bushing and install/removal tool. (Monterey County California) will be doing it in the near future

@Jostln Год назад

@@jrdainvestor8304 glad you found a cheaper place man, those California labor prices are through the roof. hope that nasty needle bearing vibration goes away!!!

@SergioSanchez-eo4ls 3 года назад

Only driver side you recommend

@MrLiquidArrogance 2 года назад

Needle bearing is only on the driver's side.

@glennbrooks3449 2 года назад

@@MrLiquidArrogance what is on the other side ?

@BenBinnebose 2 года назад

@@glennbrooks3449 Passenger side is a ball bearing

@glennbrooks3449 2 года назад

@@BenBinnebose Thanks for the reply Ben but I do not know if it makes me feel good. I have ordered the ECGS kit and it does not make me feel good replacing a needle bearing with a bush when the passenger side works fine on a ball bearing. Maybe I will regret not just putting a new needle bearing back. At least then it may work for a couple of years or more before it gets bad again. Hope I made the right decision.