Тёмный

Echo SRM 225 Weed Trimmer Won't Start - Why? 

The Lawnmower Lady
Подписаться 20 тыс.
Просмотров 196 тыс.
50% 1

Learn how to diagnose an Echo SRM 225 that won't start possibly due to bad crank seals or leaky exhaust gaskets without special tools. This problem is common for many a 2-stroke trimmer, garden tool, chain saw, strimmer or blower made by Echo, Stihl, Husqvarna, Shindaiwa, Ryobi, and many others. This tutorial can help you to understand why your 2-stroke trimmer or blower is difficult to start or won't stay running. Sometimes a clogged muffler or spark arrester screen will alter the ratio of fuel/air flow on your 2T machine.
00:00 I'm not Will
01:10 Inspect fuel lines, spark plug, and fuel filter
02:23 Remove top cover to inspect spark arrester
05:16 Clean oil and carbon deposits
07:56 Remove recoil starter
09:12 Inspect crankcase and piston
10:19 Poor man's pressure/leak test
14:05 Re-assemble baffle and shroud
The tools I like and use most often:
Magnetic spark plug socket set: amzn.to/3CzmpvO
Tachometer: amzn.to/3sHibiH
Vessel Megadora JIS screwdriver set: amzn.to/363RFqO
Channellock Bent Needle-nose pliers: amzn.to/3I5DbnA
Long 1/4 Quick-connect Torx Driver Bits: amzn.to/3HUNgnm
Spark Tester: amzn.to/3CxW2qi
OTC Leak-down Test Kit: amzn.to/3CyUhJn
Compression Tester: amzn.to/3IWd6sp
Wear your safety glasses, or you'll put your eye out. Try on some gloves. Take off that spark plug boot. Clean your room. Open the windows, those fumes are nasty. Just 'cause I do it, don't think it's the end all, be all solution. There's plenty more ideas out there, I can't take responsibility if you slice off a few fingers after watching my videos. And don't just pour that toxic stuff down the sewer or in the ditch, dispose of waste responsibly. Just be safe, OK?
Follow along with me elsewhere:
/ thelawnmowerlady
the-lawnmower-lady.blogspot.com/
Titles, opening graphics, and music by AbleVFX.
Any links to products are likely affiliate links, and I may earn a small commission from qualifying purchases (Thank You!), with no additional costs to you.
Disclaimer: The content of this video is purely for my entertainment, and is available to you for informational and educational purposes only. It's not substitute advice from small engine mechanics with professional training and certifications, nor does it create any kind of relationship between the The Lawnmower Lady and you. Your situation may be different, and the The Lawnmower Lady makes no warranties, express or implied, as to the fit, accuracy, or applicability of the information shown in this video, and implies no guarantee of results. The Lawnmower Lady and any sponsors of this video are not liable for any damages of personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any parts and procedures represented in this video. You are using the information presented in this video solely at your own risk.
#echo #srm225 #smallenginerepair #DIY #lawnmower

Хобби

Опубликовано:

 

29 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 471   
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
If this video helped you, please consider clicking on the THANKS button above 🙌 Here's a video that might help you decide if that trimmer or chainsaw is worth the money at a thrift shop or a yard sale: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9BGYzFx_tj8.html
@rickthelian2215
@rickthelian2215 2 года назад
Just watched it now Stella, you pay for what you get most times, though you can be lucky sometimes.
@jakewells9403
@jakewells9403 2 года назад
I bought a SRM 225 years ago used that had a oil seepage problem with the muffler. I ditchED the catalytic muffler for a older SRM 2100 non catalytic and it solved the problem and no more oil mess.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
@@jakewells9403 Thanks for watching Mr Jake! I'll suggest that to the lady that owns this. Cheers!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
@@rickthelian2215 You are right Mr Rick!
@THEMOWERMEDIC1
@THEMOWERMEDIC1 2 года назад
I love watching professional repairs! Great job as always Stella!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
That means a lot coming from you Mr Jeremy. Cheers!
@jdp1956
@jdp1956 Год назад
Excellent and very informative video. I just picked up a SRM-225 at a garage sale for 5 dollars non-operative and by following your video and a few others that have to do with carburetor I got it purring like a kitten now. THANK YOU !!!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
That is awesome! Thanks for watching. Cheers!
@richardrandall1852
@richardrandall1852 4 месяца назад
Lawn mower lady- just throw in Dumptser
@TheLawnmowerLady
@TheLawnmowerLady 3 месяца назад
LOL, I'm trying to save the planet here.
@richardrandall1852
@richardrandall1852 3 месяца назад
@@TheLawnmowerLady if can fix am up get them running someone could have good piece of equipment to use
@baldeagle242
@baldeagle242 2 года назад
Another great video young lady! Your knowledge of small engines, video and editing skills all compliment each other extremely well. I really enjoy watching and learning from you. Thanks for sharing and have a great weekend. 👍
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Steve for your kind words!
@chadjenner8971
@chadjenner8971 Год назад
Much props to you and how you give attention to detail in certain issues that may arise just like the screws..
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate your kind comments. Stuff like that is easy to miss, and can cause a lot of grief when the wrong screw strips out the threads in the casing. Thanks for watching. Cheers!
@davidcurnutt9584
@davidcurnutt9584 2 года назад
That stop/start switch will getcha every time. Great vid. Same machine I use at my home.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Yep, gets me all the time Mr David.
@apatterson8128
@apatterson8128 2 года назад
I couldn't believe the screen wasn't clogged. You have great patience cleaning that weed wacker. Great video!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Ms Patterson. I honestly believe the other shop just replaced the screenm but didn't clean out anything else, leaving a build up that still restricted the exhaust. Thanks for watching. Cheers!
@bilsha2699
@bilsha2699 Год назад
I really like the way you explain very patient & concisely
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate you watching. Cheers!
@retiredhappy466
@retiredhappy466 Год назад
I am a pretty good DIYer, however, I still enjoy watching your videos and always pick up a few hints & tips along the way. Nice video!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate that!
@RaleysSmallEngines
@RaleysSmallEngines 2 года назад
Great video as always Stella. Showing our tricks of the trade I see Lol. We have the tools but seldom pressure test, carb. or brake cleaner is way faster and works great. Thanks for sharing this great, easy to follow tutorial.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr T-Bone. Gotta help where I can. Cheers!
@nashguy207
@nashguy207 2 года назад
I was expecting to see a clogged screen arrester as well I was surprised when it was clean. I can't think of anything else you could of done I think some oils leave more residue behind than others. Great job Stella. Haven't forgot your picture will get it to you soon.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Me too ! Thx for watching Mr Nash
@gerardoesparza8650
@gerardoesparza8650 Год назад
I’ve found that when homeowner don’t do a correct oil/fuel ratio mix, that usually happens. I just tell them just buy it already mix for you. That way you can not I repeat can not mess it up. Thank you, love your channel
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Good advice. Thanks for watching. Cheers!
@andersforrad
@andersforrad 2 года назад
Great video Stella - you are not alone with the kill switch - happens here all the time 😃! Hope to catch up tomorrow on the stream. Cheers!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Anders. Cheers!
@CFLDumpsters
@CFLDumpsters 2 года назад
Nice! Sometimes it’s best to start with the basics, spark, fuel, air and is it clean no build up. Great video
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I appreciate you watching. Cheers!
@johncasor9698
@johncasor9698 9 месяцев назад
we really enjoy watching you cleaning parts... old gas is a great idea... Thanks ....
@TheLawnmowerLady
@TheLawnmowerLady 9 месяцев назад
Thanks for watching!
@thomasgilbert4131
@thomasgilbert4131 Год назад
I had a trimmer once, forgot the brand, but the kill switch was momentary contact so it could never be left on which was one less thing to worry about. Good video and its good to see that Chickanic has some competition!!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate you watching. Cheers!
@DOCREAL1118
@DOCREAL1118 2 года назад
I ran echos for several years. They were notorious on the 225 for that build up and oil seapage. We always had to take the screen out and contantly change the filters. That's why I made the move to Stihl and problem solved. Great video
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Shane!
@DOCREAL1118
@DOCREAL1118 2 года назад
@@TheLawnmowerLady Your quit welcome. I enjoyed the video. Keep putting that gold out!! Congrats on 1k
@spigs1967
@spigs1967 2 года назад
what people and landscapers alike fail to ralize that the orange echoe models are home owner use only,the grey cases is for the pro landscaper,the other fact is the srm-225 and 230 as well as others are home depot models not a professional lawn mower shop grade,they have no carb adjustments and we see these all the time with running issues especially when engine is breaking in and rings seat,
@DOCREAL1118
@DOCREAL1118 2 года назад
@@spigs1967 I had no idea. Makes sense. Thanks man
@JFPriest
@JFPriest 2 года назад
@@spigs1967 Sorry I disagree on e one point. All new Echo Models are now Orange. I do agree on the point that Home Depot and Lowes do not sell commercial grade units.
@TheRustyRooster
@TheRustyRooster 2 года назад
Another great job, just keeps getting better and better 👏
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thank you Mr Rooster!
@lcharles7444
@lcharles7444 Год назад
We’ll I watched your other video and it helped me out. I was all set to go out and get a new srm225 after 10+ yrs reluctantly, but checked out your video and it worked. I changed the carburetor and was priming it too much and was flooding it, kept repeating the mistake a couple of times, cook the air filter cover off let it sit for a day then primed 4x and it started. Thanks
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Yay! Glad to help. Cheers!
@dLLund
@dLLund Год назад
thank you, again, for posting. i like it that you use hand tools. lotta things got fixed before power screwdrivers & impact drivers. i like your voice & delivery. take care. dLLund
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for watching!
@INSIDEHOUSEGARAGE
@INSIDEHOUSEGARAGE 2 года назад
always appreciate a clean machine. thanks for sharing
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Me too!
@kbssmallenginerepair2615
@kbssmallenginerepair2615 2 года назад
Excellent video Stella. Keep up the great work.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Kyle. Cheers !
@wildbillslawncare5901
@wildbillslawncare5901 2 года назад
I had the same problem with my old Echo but it still ran. Wow nice cleanup. I hate that switch it got me every time Lol. That's is amazing I thought it was going to be something major. You are good. This might have been a small problem, but you taught me something Stella.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thx Mr Bill. I honestly think the little muffler screeen was just too gagged up. Whoever cleaned or replaced the screen didn’t clean that out.
@wildbillslawncare5901
@wildbillslawncare5901 2 года назад
@@TheLawnmowerLady Your very welcome Stella. Yea that was a lot of oil gunk up in there.
@philliphall5198
@philliphall5198 Год назад
I agree on crap switch
@biggaspirit1
@biggaspirit1 2 года назад
Enjoyed the video. Thank you from the UK.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Cheers Mr Bigg !
@markwiley9516
@markwiley9516 2 года назад
Hi Stella great job and a great video I like the way you work on your jobs old toothbrushs are great for small engine's 👍
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Mark. I try to recycle everything 😀
@robertcochran7103
@robertcochran7103 Год назад
This is a marvelous video. Thank you for posting it.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Glad you enjoyed it!
@HobbyMotorDK
@HobbyMotorDK 2 года назад
Good stuff Stella. What a good little trimmer
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Yep Mr Claus. That Lady that owns it loves it.
@tonycolca2241
@tonycolca2241 22 дня назад
I watched your video yesterday this morning I cleaned the muffler also I beleive I had some bad gas I got some fresh gas and mixed it with echo red armor oil. Started right up. THANK YOU !
@TheLawnmowerLady
@TheLawnmowerLady 22 дня назад
Great job! happy to help. Cheers!
@tonygriffiths2485
@tonygriffiths2485 11 месяцев назад
I do not come into contact with the likes of mowers, chainsaws or trimmers and such, but am an engineer (sort of) I found that very interesting. This is the first video of yours, after James Condon recommended you, and I am very grateful to him for that. Will be watching a lot more. Thankyou Maam :)
@TheLawnmowerLady
@TheLawnmowerLady 11 месяцев назад
I appreciate you watching Mr Tony. Cheers!
@kirkthebeerslinger
@kirkthebeerslinger Год назад
great video-subscribed...since the only oil in a 2-stroke is already mixed with the gasoline - the only place the oily buildup can come from is there...I don't experience this with my two stroke equipment (including a pair of 225's) and my theory on why is because they don't get babied...running with plenty of WOT gets everything running nice and hot...it can't get clogged up when it is burning cleanly...I believe once it starts it gets worse and worse until a proper clean like this excellent technician performed here
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I believe that was the problem here, not revving it WOT, and think the other shop just replaced the spark arrester screen, without bothering to clean any thing else. Thanks for watching.
@CanadianMapleleaf
@CanadianMapleleaf Год назад
Lawnmower lady as a man I have something to say to you...I really like your show, I mean I really like it 😊 it's fun, informative and the video is well recorded, just a great RU-vid channel . Thank you....
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Wow, thank you! Cheers!
@elierfernandezguerra
@elierfernandezguerra 3 месяца назад
​@@TheLawnmowerLady He's telling the truth, and I agree with him.
@portrait1001
@portrait1001 Год назад
Small engine repair is always a hassle. I put my echo away after using it with no issues. Two weeks later it's leaking fuel. Thank you for this very useful video. I'll be able to make the complete carburator and fuel line fix myself
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Happy to help. Thanks for watching!
@richardrandall1852
@richardrandall1852 3 месяца назад
Junk it
@percylewis7692
@percylewis7692 9 месяцев назад
Thanks Lawnmower Lady, your content was greatly helpful 😊👍🏽
@TheLawnmowerLady
@TheLawnmowerLady 9 месяцев назад
Glad it was helpful!
@dr.lmsb4456
@dr.lmsb4456 2 года назад
Awesome video STELLA . Dang thats alot of oil on their ..lol .. Thanks for all the amazing videos . Hope all is well take care & stay safe .
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Doc. It was a mess.
@dr.lmsb4456
@dr.lmsb4456 2 года назад
@@TheLawnmowerLady yea i bet
@JerryWilliams-vk6gr
@JerryWilliams-vk6gr Год назад
You are very thorough, I don't think you missed anything .
@TheLawnmowerLady
@TheLawnmowerLady Год назад
In the end, I believe she was just not revving it to full throttle when she was trimming. Allowed a lot of blowby to accumulate. Thanks for watching.
@clayman7853
@clayman7853 Год назад
Great vid taught me something new, thanks for sharing!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
You bet! Thanks for watching!
@KensSmallEngineRepair
@KensSmallEngineRepair 2 года назад
Old fuel is nice and cheap, I keep a 5 gallon can just for cleaning parts. Great vid Stella!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
That's why my shop smells so sweet. 😂
@KensSmallEngineRepair
@KensSmallEngineRepair 2 года назад
@@TheLawnmowerLady I guess we get rid of it when it starts smelling like turpentine!
@JukieBear
@JukieBear Месяц назад
Thank You for sharing so clearly, I sure feel looked after and very grateful to learn about my Echo. Have saved both link and video to recheck when I have to time to follow your advice without haste. Gosh you are so Good!💐💐💐👏🏼👏🏼🤩🥰
@TheLawnmowerLady
@TheLawnmowerLady Месяц назад
I appreciate you watching. Cheers!
@JukieBear
@JukieBear Месяц назад
Your very welcome. I ordered the kit feeling very supported by the steps you have shown. Be joyful!🫶🏼🙏
@WNCworks
@WNCworks Год назад
I've seen buildup from seepage when folks store those echo trimmers hanging with the power head down. When the gas evaporates from the fuel, the oil is left behind. Good video, as usual!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Good to know. Cheers!
@blakelwhitney
@blakelwhitney 10 месяцев назад
So store then engine up? Or on it's side?
@WNCworks
@WNCworks 10 месяцев назад
@@blakelwhitney engine up if it has fuel in it.
@timdaniels2100
@timdaniels2100 Год назад
That was awesome ! Thanks young lady.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Happy to help. I appreciate you watching!
@jabulanidlamini2826
@jabulanidlamini2826 Год назад
Excellent video Stella
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you! 😃
@rogermcdonald1607
@rogermcdonald1607 2 года назад
Stella, i don't think you missed anything! Maybe customer is using cheap 2 stroke oil or over mixing it. You improved the cleanliness 100%. Good job as always. I know you have been very busy as i saw you had to go to Raleys Small Engines and do some welding! LOL. 🤣😎👍Roger
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Roger. The owner is pretty savvy about these machines. I think just never cleaned up muffler parts, maybe running often at lower rpm.
@trent8584
@trent8584 2 года назад
Great video! Keep it up and you will hit 100k !!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Hope so Mr Trent ! Thanks for watching and your support. Cheers!
@JungleBobRepair
@JungleBobRepair 2 года назад
Awesome quality on the video!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Glad to hear that Mr JB! Cheers!
@garyclifton2180
@garyclifton2180 2 года назад
Nice fix and tips Stella did you see Bruce make the piston stop other day another one if your tips brilliant x you rock x
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Cheers Mr Gary. Thanks for watching.
@stepheneggert9474
@stepheneggert9474 10 месяцев назад
Eather fuel lines , fuel filter..or carb.. yes the screen needs cleaned..I have the same one.. great unit..did a tune - up .. first time in 6 yrs since new..bought the kit...I also have some sea - foam in my gas can..I run through the trimmer.. always..with high tes, 93... Shell gas..no speedway..great video..ty
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
Right on!
@agustinarango5172
@agustinarango5172 Год назад
That's a pro job. Congratulations
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for watching! I appreciate the comment. Cheers!
@Big_Johns
@Big_Johns 2 года назад
Nice video Ms Lady, I love your levels of "cleaning gas", bad bad and fresh bad, sounds like someone I know. :)
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Yep, I felt kind of silly saying that, but that first tin was too gagged up. Thanks for watching.
@Big_Johns
@Big_Johns 2 года назад
That was the best way to say it, sounded spot-on. 🤣👍🏼🤣
@Big_Johns
@Big_Johns 2 года назад
I just received an envelope in the mail, thank you so much.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
@@Big_Johns Yay!
@franciscoysaguirre2551
@franciscoysaguirre2551 10 месяцев назад
Ty for the content...I got my weed eater working again!!🎉🎉
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
Happy to help!
@philliphall5198
@philliphall5198 Год назад
You AllWAYS have a clean work area and that’s very important for good repairs
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Ha! Thanks. I think it’s more the camera angle. My little shop is a mess, but I do store tools and attempt to tidy up between jobs. Thanks for watching.
@Notarobot310
@Notarobot310 Год назад
Just an FYI, when first checking out a non start issue start with checking out the cylinder head though the exhaust port and then you will know if you should go forward or if it has actually become a large paper weight. Gas, spark, exhaust, and of course compression is needed for it to run however the most costly being compression. Great video though, keep posting.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for watching!
@jackdaddyslim3895
@jackdaddyslim3895 Год назад
I enjoyed Your video Greatly.. Thank You
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I do appreciate you watching. Cheers!
@robcole8218
@robcole8218 2 года назад
Great video
@BartlettTFD
@BartlettTFD 11 месяцев назад
New viewer here. Very interesting and educational‼️Many thanks😃
@TheLawnmowerLady
@TheLawnmowerLady 11 месяцев назад
I appreciate you watching. Cheers!
@kevinmartin4787
@kevinmartin4787 Год назад
Thanks! Great job on the video.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Glad you liked it!
@petefroud5308
@petefroud5308 2 года назад
Good job Stella.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Cheers Mr Pete!
@howardmullins07
@howardmullins07 11 месяцев назад
Thank you for showing me my problem on my echo weed eater
@TheLawnmowerLady
@TheLawnmowerLady 11 месяцев назад
Happy to help!
@MrLighthorse69
@MrLighthorse69 2 года назад
I suggest you do your leak test using brakekleen instead of carb cleaner. It's non flammable which is of course safer, and it is safe for your engine as well. It also is immediately obvious when you hit the leak as the motor stops instantly but cranks right back up first pull. I mostly repair and rebuild chainsaws and this has proven to be the best and easiest method of finding leaks not to mention cheapest
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Nice! I like the brakekleen idea. Cheers!
@philliphall5198
@philliphall5198 Год назад
I agree with You. It works great
@roblord7610
@roblord7610 Год назад
Regular Brakleen is flammable and often used as a substitute for engine starting fluid -
@horton368
@horton368 Год назад
I try to avoid brakekleen on any plastic components. The old stuff can ruin plastic, not sure about the newer formulas.
@charlesroberts3910
@charlesroberts3910 Год назад
Is it possible the wrong fuel mix was used
@rodrigocarranza2565
@rodrigocarranza2565 2 месяца назад
Beautiful 😊
@matthewderickson1121
@matthewderickson1121 2 года назад
Great Job Stella all my echo srm 225’s leak except the oldest one. I heard it’s because the new muffler don’t have a baffle like the old ones did.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Matthew! No baffle will certainly allow more blow-by to not get burned up.
@matthewderickson1121
@matthewderickson1121 2 года назад
@@TheLawnmowerLady Correct, because I researched why my (4) newer srm 225's leaked and the oldest srm225 didnt. I have a Husqvarna 123L that leaks I will check into why it leaks.
@pietrosenerchia1786
@pietrosenerchia1786 2 года назад
Beautiful job lady...
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thank you! 😊
@eeverett2
@eeverett2 2 года назад
I learned something new, gas can be used to clean, thanks Stella.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I figure why waste a great solvent. Cheers!
@richardrandall1852
@richardrandall1852 3 месяца назад
@@TheLawnmowerLady pour rest of old gas in your car, that's what a guy in bethel ct says
@TheLawnmowerLady
@TheLawnmowerLady 3 месяца назад
I always suggest that to my clients. Obviously I would not do that with bad fuel like this with all the dirt and particulate matter after cleaning all the debris off the exterior of any machine.
@tinkeringtaylor3053
@tinkeringtaylor3053 2 года назад
good video Stella well done
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Cheers Mr Nev
@francislang5075
@francislang5075 2 года назад
great video
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks! 😊
@merlin0152
@merlin0152 Год назад
Nicely done.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate you watching!
@VintageEngineRepairs
@VintageEngineRepairs Год назад
Great job Stella :)
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you Tom! Cheers!
@rotemtomhagbi1937
@rotemtomhagbi1937 Год назад
Just found one in the street 12 dollar new carburetor kit (plug , carb, gas lines , and filter ) runs great, and also if you having problem with gas. Check that the line is broken where its attached to the tank
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Nice score! Cheers!
@Jefty49
@Jefty49 3 месяца назад
Great video !
@TheLawnmowerLady
@TheLawnmowerLady 3 месяца назад
Thanks!
@MikeJones-jr5hb
@MikeJones-jr5hb 2 года назад
Could’ve been stored with old fuel & the gas will evaporate leaving behind more oily residue then they put fresh gas mix in mixing with the oily residue making the mixture with too much oil. Good video!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Great point Mr Mike! Thanks for watching.
@peterlehmannl5972
@peterlehmannl5972 2 года назад
Add not running at full revs to the mix and I think we have the cause of the build up. Worth asking about the fuel mix and how the machine is operated.
@stormman8393
@stormman8393 10 месяцев назад
Great informative video. This has helped me. I'm a subscriber.
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
Awesome, thank you! Cheers!
@imannonymous7707
@imannonymous7707 2 года назад
This seems to be a common issue, good to know
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I appreciate you watching. Cheers!
@paulstir
@paulstir 2 года назад
Outstanding young lady 👏
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Paul. Cheers!
@paulstir
@paulstir 2 года назад
@@TheLawnmowerLady it’s very unique that any lady take her hands to engine work here in Scotland to be honest it’s not something I have ever witnessed (44years ! ) , you certainly can work those machines much respect lady 🙏
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
@@paulstir Slàinte Mhath!
@cmerighe2
@cmerighe2 2 года назад
Helpful video
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Glad to hear that Mr Carlos! Thanks for watching. Cheers!
@br927
@br927 2 года назад
Hey, don't feel bad! My dad was trying to get our Farmall Super C started, I even towed him around with the JD 60, then he discovered he didn't turn the gas on!!
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I know my right arm is probably longer for all the times I've yanked on starters without replacing the spark plug boot, kill switch, etc. 😂
@brianking1138
@brianking1138 2 года назад
Great job on the video and the repair. Perhaps it was run with to much oil in the mix? It seems to be running great now.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Brian. I think the owner mixed oil right, but I think it was run too long at too low RPM. Cheers!
@budgunter8950
@budgunter8950 2 года назад
I always enjoy your videos. Always helpful. Thank you. Is the build up caused by not running it wide open most of the time? I was told it will do that to all of them if you run half throttle most of the time. I know you need to run low throttle for certain circumstances.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Bud ! In retrospect, I think that indeed was what caused this build-up of un-burnt fuel and oil. I think once these units are warmed up, they do best at WOT. I appreciate you watching. Cheers!
@JoeySkoots27
@JoeySkoots27 Год назад
This is awesome I wish we were related
@dianafenick6266
@dianafenick6266 Год назад
Can you make a video to adjust air/fuel mixture? This one is very helpful...
@TheLawnmowerLady
@TheLawnmowerLady Год назад
The honest truth is I don't have to tweek them too often if the carb and air filter is clean. But next time I will. Thanks for watching.
@mowerrepairshopfortscottkansas
@mowerrepairshopfortscottkansas 2 года назад
grate video
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Kenny! Cheers!
@spigs1967
@spigs1967 2 года назад
great video stella,as i try to teach other so called mechanics,your only as good as your diagnosis,if you follow the diag procedures which are pretty much standardized in the small engine world and you have common sense then you cant be wrong in your diagnosis of no starts,the basics always apply,air,fuel and spark,if you have none of the three it aint running,i see many a genious at my shop that think they know it all and follow bad habits and dont read service manuals or check for bulletins or other factory or dealer problem run ins,
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Spigs! I appreciate your comments. I learnt a long time ago to start with the easy stuff. Cheers!
@menditman2004
@menditman2004 2 года назад
Hi Stella good video, you did everything much the same as I would have done, even the poor mans leak test👍 Also forgetting the kill switch, I’ve done that 😂😂 I wonder if they have been mixing the fuel to strong, to much oil as I’ve had that on tools before especially on echos, that’s my theory anyway. Thanks for the video🙂👍
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Luke! I honestly think the other shop replaced the spark arrester, didn't bother to clean it up, and the owner prolly had a habit or running it at low RPM. I explained this to the owner, and hopefully it run well for the next few years until the fuel lines start to go. Cheers!
@alexandercopeland2849
@alexandercopeland2849 2 года назад
I am surprised that a big repair shop didn't clean it. Must be getting paid flag hours.
@tonymayhew191
@tonymayhew191 2 года назад
Yes Stella, You missed it! Since I eat, Breathe, and sleep 2-strokes I will tell you what happened. The oil/fuel mixture was way too much! This is what happens, It sticks the compression ring or rings in the ring land of the piston causing low compression but also allows blow bye of the excess unburned oil to escape past the ring that is supposed to seal that surface between piston and cylinder. I recommend first that you tell your followers to never run regular gasoline in a 2-stroke engine! I have about 60 chainsaws in my collection and some of them tell you on the fuel cap to mix it 16:1 But the oils of today have way better lubrication properties than even stuff used in the eighties and early nineties! And I run all my 2-strokes 5o:1 ratio on the fuel/oil mixture and have never had any problems what so ever! I just purchase the VP small engine 50:1 already mixed and 94 octane and you will love the performance your piece of equipment will have and will never see that oil mess running out of the exaust pipe ever again 😋
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
You have a good point Mr Tony about the fuel. She was using premium gas, but not revving it at high RPM. In her case, I advised her on the benefits of ethanol-free fuel to preserve the fuel lines and internal carb bits, since she does not use the tool on a regular basis. She said she might even try the premix canned fuel. Thanks for watching. Cheers!
@dianafenick6266
@dianafenick6266 Год назад
I have this problem now. I have only used 50:1 ratio fuel for 2-stroke engines.... I will try to find a leak and clean it out, but I don't understand why a 50:1 ratio would cause this.
@karlrovey
@karlrovey 11 месяцев назад
I have this model. I don't have the starting issue. My arrestor screen isn't plugged either. However, I also have the oil all over the muffler. I run the correct mix as well. It seems like part of it is just due to the re-direct right after the spark arrestor. It isn't leaking. It just comes out the muffler.
@paulhare662
@paulhare662 10 месяцев назад
My 1979 032AV loves VP 94 octane.
@alan-dr8uo
@alan-dr8uo 10 месяцев назад
Thanks Tony telling about the new oil verse the 80s
@andybecker2693
@andybecker2693 2 года назад
I think that a lot of people are just mixing in a “ little extra oil” thinking that more is better. More often than not folks are not able (or willing) to run these 2 cycles at full rpm. Putting these around will cause this build up. I have had great results from using the Echo Red Armor oil. I think it’s way ahead of the old Power Blend Echo oil. It’s not cheap but as a homeowner, you probably don’t use much fuel and oil anyway.
@andybecker2693
@andybecker2693 2 года назад
For homeowners, the premixed ready to use canned fuel takes the guesswork out of mixing and stores well.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
You're right Mr Andy. That canned fuel takes a lot of guesswork, math, and bonus: no ethanol. Thanks for watching. Cheers!
@andybecker2693
@andybecker2693 2 года назад
@@TheLawnmowerLady I’m so glad that I found your channel. I think it’s great to see a lady that is so passionate about small engines. I love helping my coworkers get their chainsaws and trimmers running again.
@baddad5781
@baddad5781 11 месяцев назад
Makes me think possibly the wrong oil /gas mixture but nice video mame. Ill say you sure can clean an engine ha ha
@TheLawnmowerLady
@TheLawnmowerLady 11 месяцев назад
The owner was using it around 1/2 throttle at all times. They were mixing it right, the other shop i believe just replaced the spark arrester without addressing any of the blow-by build up. As much as I complain, bad gas the best! Haha.
@Ray_ray11
@Ray_ray11 2 года назад
Hi, I have just come across your channel. All very good. I watched the one where you use the tecumseh tool to set the float bowl. I live in Scotland UK and have been trying to find that tool here in the UK. It seems that tecumseh parts are not available in the UK. Thank you.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks and welcome Mr Ray! Maybe try ebay for a seller who has that Tecumseh 670377 tool and will ship to UK? The thickness of the tool there is 5.4mm. I've seen Donyboy73 use a 7/32 drill bit to set the float level too. Cheers!
@tonycolca2241
@tonycolca2241 23 дня назад
Great video I think that is what is wrong with mine.
@TheLawnmowerLady
@TheLawnmowerLady 23 дня назад
I appreciate you watching!
@cliffcowdell9760
@cliffcowdell9760 2 года назад
You are awesome
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks!
@cliffcowdell9760
@cliffcowdell9760 2 года назад
Thank you. You give a lot of great tips.
@AlanMedina314
@AlanMedina314 Год назад
A good honest cleaning did a miracles on that little engine.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Absolutely. Thanks for watching. Cheers!
@jamie6011
@jamie6011 Год назад
Great video! But if scraping that much out of exhaust port maybe clean it out fully as that is clearly a problem that will multiply!?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks. I appreciate you watching. Cheers!
@Inisfad
@Inisfad 2 года назад
While I understand that this issue would have been due to the blow by and machine never being cleaned in years, would the amount of oil that was present possibly be due to using too much oil in the gas to oil ratio??
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I don't think so Ms Inisfad. The lady that owns this always uses the Echo oil. I just think build up over the years with a recently replaced spark arrestor screen.
@simonafrika8260
@simonafrika8260 Год назад
Thank,s
@TheLawnmowerLady
@TheLawnmowerLady Год назад
You're welcome!
@waynestefinashen239
@waynestefinashen239 2 года назад
Nice video Stella, with no disrespect to the female community we have many single mom and widowed customers that have needed their two stroke equipment serviced every year to get it running. In all cases it has been improper fuel mixture so as a service we mix ethanol free fuel to their required specification with top quality two stroke oil then sell them a litre of Aspen 2 premixed fuel for the last use of the year and winter storage. To date no service on this equipment for carb issues customers are very happy.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks Mr Wayne. I think she might switch to the canned premix. But she seemed prey savvy about her equipment. Maybe just running it too long at a lower rpm.
@waynestefinashen239
@waynestefinashen239 Год назад
@@TheLawnmowerLady I think you are right on with that diagnosis Stella.
@jimoswald4824
@jimoswald4824 Год назад
Hi I have a srm 225 also. And mine started with that oil mess all over right away. The problem is the carbs are set too rich from the factory. You need to drill out and remove the plug covering the mix screw under the primer bulb and turn clockwise lean out the carb slightly. I am doing mine one quarter turn at a time and the oil problem is almost gone. Do not go too lean though!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
In the end, I think the owner was just not revving it out, and creating a lot of unburnt fuel. Thanks for watching!
@dianafenick6266
@dianafenick6266 Год назад
I was wondering about that ... I purchased a 2.5mm 91075 so I can adjust the mix, but I'm a newbie 65 yo woman learning all this great stuff before I replace this trimmer!
@Exemplar9
@Exemplar9 Год назад
An oily muffler like that one is a perfect candidate for the barbecue cook out method of cleaning. I saw this on the web somewhere and have done it on three or four 2-stroke mufflers. Just lay the muffler directly on top of an outdoor propane burner for about 3 minutes and flames will start coming out of it. A couple more minutes and the flames will die out. Then take it off with tongs and let it cool off. Finally, blow it out with compressed air. Beware it may make quite a cloud of white ash. Then it’s done. Clean as a whistle! I haven’t had any problems with solder joints melting, which was my apprehension at first. Also, I did not include the gaskets in this process.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I agree, that's a great method. I actually have done that with antique scooter silencers. Too big for a burner, it goes head first into a campfire. I imagine it lets off some pretty caustic vapors, but it cleans them very well. Takes a long while with all the internal baffles. Easy work on a trimmer howeve, maybe only one baffle? I appreciate you watching. Cheers!
@Exemplar9
@Exemplar9 Год назад
@@TheLawnmowerLady Love your videos; keep it up!
@benj4131
@benj4131 2 года назад
Enjoyed your video. Wish it had been around years ago. What other solvents would you recommend for cleaning the part if you don’t have old gas. Unfortunately or fortunately mine is at the age that might just be time to get new but now I know what to look for or reason for leakages.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
I also use kerosene. I think folks across the pond also call it paraffin. I appreciate you watching. Cheers!
@benj4131
@benj4131 2 года назад
Thanks! The only other thing I would ask is maybe in future video. Add what type of heads are on the bolts or tools needed. Had to change the pull on mine once and finding the right head was a pain. Fortunately was at local maintenance shop and they were able to find it.
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
@@benj4131 Actually if you watch most any of my other videos, I always do, but I edited that out. That should be either a T25 or aT27. In this video I used a Torx T-handle that the numbers had rubbed off, I was unsure, and edited the size out. Subsequently I purchased some long reach 1/4 quick connect Torx bits, and promptly painted the T27 with orange nail polish before I used them (Stihl uses T27 on everything). I got another SRM225, and used the T25 (no orange paint) in another video. Someone called me out on that. I don’t have either machine to double check. Thanks for your comments. Cheers!
@nperson
@nperson Год назад
Interesting video. I'm not familiar with that type of pressure check. Why would the engine RPM's change if there is a leak?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
The aerosolized fuel, in the form of carb spray getting into the fuel/air mix via the leak.
@leonanzaldua814
@leonanzaldua814 2 года назад
Hi, Stella I currently replaced my carburetor with a new kit and gas lines. There is spark. But before I did all this, I pulled and I pulled until I got it running but without letting go of the gas or else it would turn off. I used it for one hour straight and it just turned off. Haven't been able to turn it on. I also cleaned the piston the screen in the muffler and replaced the sparkplug. Can u give me any advice
@TheLawnmowerLady
@TheLawnmowerLady 2 года назад
Thanks for watching Mr Leon. Sounds to me like you need to adjust the low speed screw if it won't idle. On those echo carbs, the low and high speed screw are hidden, and have anti-tamper covers. The high speed screw is under the primer bulb, and the low screw is right in the middle of the top where the throttle cable is attached. I haven't edited a video on that yet, but you can find other videos out there that show how to pull that plug out and adjust the carb. I hope that helps.
@jmb92555
@jmb92555 Год назад
Hi LL. I have a problem you may be able to help with. A neighbor brought his Echo 266 edger for me to repair. I checked it out and there was no spark. I diagnosed it as a bad coil. I ordered an new one and installed it. While installing it I noticed that each screw/bolt that holds the coil in place has a plastic washer/spacer as well as metal washers. One of the plastic ones had degraded and in fact broke in two while installing the new coil. I had some small plastic washers (wrong size and not made for use on a small engine) handy. I tried one in place of the original one. Being the wrong size and not intended for this purpose it squished and distorted when I tightened the screws. The engine will fire up now & then but won't stay running. I think that if those plastic washers were indeed intended as electrical insulators then the one I replaced isn't 100% effective due to getting squished/distorted. It also could be preventing proper alligment of the coil contacts I suppose. I've watched other coil issue vids but those coils didn't have plastic washers. But also the flywheels in those vids were plastic w/ magnets embedded. The flywheel on this machine is all metal. Also if I touch the flywheel casing/cover during the short time it runs or while pulling the started cord, I get a mild shock. I don't expect a real diagnosis. I know I'm going to have to figure it out on my own. Or not ;) This is just someething I've never run across but I know I can't be the only one.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Hmmm. I haven't run across this engine, but I assume, like you do the coil needs to be isolated from the engine. Something is amiss if you get a tingle when touching any metal. I'd be looking at an exploded parts diagram to see what should be where. I wish I could be more helpful. Thanks for watching!
@user-jh2hb6js6s
@user-jh2hb6js6s 5 месяцев назад
Did you check the rubber gasket coming out of the fuel tank? Or fuel lines to carb?
@TheLawnmowerLady
@TheLawnmowerLady 5 месяцев назад
Only in as much in my poor-man's leak/pressure test.
@lalo2641
@lalo2641 2 года назад
Thanks😂👍
Далее
I can see why this Echo trimmer was given away
18:26
Просмотров 416 тыс.
How the hell is this done#joker #shorts
00:14
Просмотров 2 млн
string trimmer weed eater coil test & replace
30:39
Просмотров 1,3 млн
Echo SRM 225 String Trimmer Won't Start - Flooded
4:24
Fixing An Echo Trimmer That Won't Start
17:09
Просмотров 38 тыс.
WOW! Hidden, Secret Greasing Spot On A Weedeater
5:31
Просмотров 696 тыс.
How-To Fix A WeedWacker That Bogs Down
7:01
Просмотров 174 тыс.
This Echo Trimmer Won't Start Because Of Poor Handling
11:40
это самое вкусное блюдо
0:12
Просмотров 2,5 млн
3D printed Hairy Lion
0:45
Просмотров 36 млн
Вечный ДВИГАТЕЛЬ!⚙️ #shorts
0:27