No video :(

Eco Frames | How To Install Mesh

Подписаться 106 тыс.

Просмотров 10 тыс.

50% 1

How To Install Mesh On Eco Frames
Step 1 - Lay out frame and mount the locking strips
Step 2 - Lay mesh with tag side visible
Step 3 - Fold over plastic strips once towards you and insert into locking strips
Step 3 - Center mesh and locking strips
Step 4 - Tension with tensioning bar starting with the long sides first
Frames will be ready to use after a 12 hour resting period.
Instead of being limited to just the screens you have on hand, and finding storage space for all of them when not in use, you now have access to every mesh count available in a convenient collapsible panel.
Installation of Eco Frame mesh is easy and fast, allowing for quick mesh changes for new jobs or replacing a popped screen.
Get The Kit Here: scrnprntl.ink/...
Need A Tension Meter? scrnprntl.ink/...
Need More Info? Read the blog! scrnprntl.ink/...
#EcoFrames #Ryonet #poweringtheprint
SUBSCRIBE: scrnprntl.ink/R...
CONNECT WITH RYONET
Website: www.screenprin...
Text RYONET to 81787 to receive occasional updates for sales, promos, and special events near you!
*STANDARD RATES APPLY
CONNECT ON SOCIAL
Facebook: / ryonet
Twitter: / ryonet
Instagram: / ryonet
LinkedIn: / ryonet
PROMO CODE
Use promo code: YOUPRINT5 and save $5 on any order over $25.
ABOUT RYONET
Founded in 2004, Ryonet® is dedicated to empowering creative entrepreneurship in screen printing through industry-leading education, service and support.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@Forgedthroughfireapparel 4 года назад

The white gorilla tape works perfect. Even during washout it may start to pull off but as the screen dries you can simply push it down in those areas and the adhesive holds tight again.

@emuvideos-farmlife 3 года назад

Great video! What width tape to use? Can you do a video on how you tape the frames? I appreciate the time you took to make this video!

@satocreate105 3 года назад

Just got mine kit and i feel kinda odd how sharp the end of the are...

@johnseber949 9 месяцев назад

My corners are up is it supposed to be like that

@Ryonet 9 месяцев назад

Hard to tell from here but give us a call during business hours to get it figured out! 360-576-7188

@cynthiajohnson-phillips5288 Год назад

I reuse all of my images and don't reclaim screens when they're spent (usually a couple of years). I do have some images that I only use seasonally (ie Christmas). Could I remove the exposed mesh from the frame, preserve it, and then restretch the exposed mesh back onto the frame in a few weeks or months? I'm only doing single color, so I don't need overly accurate registration, but my images are fairly fine detailed, so I'm concerned about distortion or whether it's even possible at all!

@Ryonet Год назад

Hello there! Good question. I would not recommend doing this. Not only will unstretching a screen thats got emulsion on it will hurt the emulsion, but when you go to reapply the mesh and restratch it, the emulsion wont hold up and the stencil will end up skewed. Hope this helps. Ryonet Team

@SuzyShuggabaker 3 года назад

Can the mesh be removed and repositioned? I’m very new to screen printing and have inherited these screens and have found a black mildew or mold between the mesh and the frame. I want to clean underneath thoroughly, but don’t want to damage the mesh in doing so

@Ryonet 3 года назад

Hi Rebecca - The strips of plastic are sewn to the mesh with a black thread. Are you possibly seeing that black thread in the channel?

@SuzyShuggabaker 3 года назад

@@Ryonet No- it’s almost as if the emulsion was not washed out completely and has blackened between the mesh and frame.

@Ryonet 3 года назад

@@SuzyShuggabaker There is no organic matter in emulsion. So it wont be mold that you are seeing, but dried up emulsion and maybe ink in the channel. You can remove the mesh, but if there is dried up emulsion and gunk in the channel, it will be difficult to clean the mesh strip well enough to re-seat properly. you will be better off replacing the panel when it pops.

@theperformingham 2 года назад

Is there a video showing mesh removal?

@Ryonet 2 года назад

@theperformingham i do not, unfortunately. i just surfed the tube for a few and wasn't able to find any videos with mesh removal on the Eco Frames... maybe that's your sign to make one???

@theperformingham 2 года назад

@@Ryonet hehe, I'm sure I'll work it out but I think if I filmed myself just now it would look like some sort of infomercial with a "do you struggle with day to day tasks" voice over.