Electric Scooter Hub Motor Dismantling and Assembling 

Glad I could help!

Noted sir. We will work on it

Mikka nanri....

Nanri nanbarae

Apko help karke humko acha laga sir. Hindi mein kuch video upload karenge.

Where are the magnets??

@@narayanak5409 Magnets are on the inside of the sleeve. Its stuck using high strength glue to the wall of the sleeve.

@@samsebikes5869 where are the sleeve?

@@narayanak5409 Sleeve is the ring on which the magents are fixed.

Sure will plan

welcome

Sure sir. We will plan for a video on hall sensor in our next video.

I am sorry, no idea about that.

So nice of you Shajan

Mr. Balaji, whats the rating of the hub motor in the vehicle? We can suggest controller based on tht only

We need the wheel dimensions to quote for the motor Mr. Nikos

Definitely we can recondition completely dead batteries to get some life out of it. The damaged cells can be replaced with new onces and used.

Sure pannidalam....

Sir, kindly call us on 9384002622 for a detailed quote. We would be glad to help.

Looks like problem with the sensors. Please call us on 9384003211 for further information

The anti theft system is malfunctioning..... you need to approach the service center.

No Vijay, breaker trips only for high current short circuit incidence.

Its not glue, its Anabond666 silicone. ITs for sealing purpose.

Welcome Ganesh

I am sorry Mr. Gopinath. Right now we are serving chennai market only. Will keep you updated when we expand our operations.

@@samsebikes5869 thanks for the acknowledgement.

It needs to be done by trained technicians

We can get it in regular bearing shops kumar. Should not be a problem. Go for original SKF bearings while replacing.

The problem is with the controller. The controller needs to be checked for configuration.

1.2 Kw..... You can approach any authorized dealers on Hero Electric Website. Its available in aftermarket EV spare shops also.

Sir that won’t be available separately you need to replace as a motor

Thank you Sugu

Thank you.

Sure Mr. Prashanth. We will do it.

I am sorry Mr. Moses, right now we are not having a formal course to teach students. You can feel free to contact us on 9384003244 for any clarifications.

Try this number:044 28450006', website: Madras Motor Technical Institute, Chintadripet. Chennai 600 002, They are taking and training students for service both for petrol vehicles and electric vehicles.Mob:+91 9150769818

Sure prabhu ji. Next video plan kartey hain

Anabond 666

We need to check vehicle first

Thank you Prasanth

Vickie ji…if we ride thru water without stopping for more than 30 minutes in water,there is no issue. Keeping the wheel immersed in water for more than 30 minutes might lead to some leakage. Even that’s not an issue if left to dry for some time and then used

Please call 938400211 will guide you

9384003211

Thank you

Please call us on 9384003211 for clarification

9384003211

Sorry sir. Only new chargers available. Please call 9384002622 for details.

Hall sensor cost will be around Rs. 70 per piece. Labour cost will be additional. Please call our service number 9384003244 for any clarification related to EV service.

Sure Dipak ji

Mr. Akash, the sealant used is Anabond 666 available at all hardware shops.

Point noted sir. We have started using hydraulic press now

Call us on 9384003211

Its Anabond666. Its not adhesive, its a Silicone paste.

Viki, there are 2 oil seals on the rear wheel and also we use silicone sealants while assembling the cover on the motor. Its perfectly sealed from water.

@@samsebikes5869 sealant it's completely cover water sir

Yes sir. When you travel down road without raising accelerator the battery consumption is reduced. In fact there will be regeneration of power and battery will get charged.

@@samsebikes5869 நன்றி சார்

Please call us on 9384002633 for service query.

I am sorry Kantharaj, I dont have the dimensions right now. Will try to get it next time.

@@samsebikes5869 - ok

Rim is not available separately sir. You need to buy as motor. Call us on 9384003211 we will guide you

Its not recommended to tamper with the controller. This will impact the safety of the battery.

Give your what's app number

Call us on 9384002633

Sure Mr. Venkatesan

Thats silicone sealant. Anabond 666

Sealant gum/glue, available Amazon online.

Please watsapp on 9384003211

Please call us on 9384002633 for guidance

noted sai

Kedaikum sir. Please call our service helpline 9384003244 for details.

What’s your specification bro..?

You need to check the battery voltage, also there might be speed lock issue.

Anabond666

Zaroor banoonga Ajinkya. Agli baar pakka

Point noted sir. We are using a press now.

You will have to open the motor and try to fix the bend on Stator..... service center engineer can do this.

We have rectified the process. Thank you for the feedback Venki.

Yes sir, mudiyum. Right now we dont have electric rickshaw.

சார் ஆட்டோ இ்ன்ஜினை பிரி்க்கமா இன்தா மோட்டரை பிட்பன்னா முடியுமா

No sir. This vehicle has a tubeless type. We need not remove the motor to fix the tyre.

Anabond 666

Approx 45 to 60

@@samsebikes5869where to buy okinawa praise pro motor sensor (hall sensor)

Mr. Ranjith, thats a valid point. Since the magnets hold the stator with high tension, we need to apply excessive force to release the same. We will instruct our service personnel to be a bit gentle.

Rim badalna padega sir, warranty try kiya sir?

@@samsebikes5869 showroom vale ne company vale ko bat ki he 3-4 days me answer ayega

@@samsebikes5869 warranty Puri scooter 🛵 ki hoti he ki specific part ki?

@@blackmangamer9265 Only for Motor, battery, controller, charger and electrical parts.

@@samsebikes5869 Thank You

I am sorry....

No idea

Yes sir, we are using hydraulic press now

We will work to improve the process. Thank you for the feedback.

Hi mani. Wheel can be in water while the vehicle is moving. Continuous exposure to water will be harmful

Yes we can replace it

I want Okinawa I pice hub motor

உங்கள் நம்பர்

9384003244

Sir we need your vehicle model to quote rate

This outlet is in Chennai sir ji.

SAMS e Bikes

No idea RP.

Point noted Mr. Naveen

Very good observation and valid point. We have installed hydraulic press to push out the stator shafts now. Thank you for the feedback Rosero. We will definitely look into other options to improve the process. The sealant application was not shown in the video, selant is applied on all the covers once we open for service.

Hero Electric

Approx 10K varum based on the motor power rating and rim size.

You can reach us at 9384003244 for service related queries.

9384003211

9384003244

9384003211