Electric Skateboard Build - Belt Drive | Weight ~11 lbs | Price ＜ $300 | Speed ＞ 23 mph

Подписаться 3,3 тыс.

Просмотров 292 тыс.

50% 1

I decided to try something different and build a belt drive board. The total cost varies a bit depending on where you buy everything but it should be around $300 or less. The weight of the board with batteries is a little over 11 lbs.
Here are the parts:
ESC with remote (10S voltage, belt motor/brushless motor):
www.ebay.com/itm/single-motor...
6374 Motor:
www.ebay.com/itm/C6374-high-e...
Motor mount for Caliber II trucks:
www.amazon.com/Premium-Electr...
Other motor mount option (I use this on my newest belt-drive board - may require grinding the trucks):
www.ebay.com/itm/DIY-electric...
This is just the mount:
www.ebay.com/itm/CNC-motor-lo...
Trucks (9” requires grinding):
www.amazon.com/Caliber-Trucks...
Trucks (10” shouldn’t require grinding):
www.amazon.com/Caliber-Trucks...
I used these FS 150mm trucks with the ebay motor mount on my newer build. I needed to grind them similarly to trucks in this video:
www.skateshred.com/trucks-who...
Deck:
www.skateshred.com/wholesale-...
skateshred.com also has other skateboard stuff like hardware, risers, and a skate tool.
These bearings are decent:
www.skateshred.com/longboard-...
Two 5S / 3Ah batteries
hobbyking.com/en_us/zippy-fli...
hobbyking.com/en_us/xt60-seri...
5Ah battery option
hobbyking.com/en_us/turnigy-b...
The price and availability of LiPo batteries seems to fluctuate. Check around the internet from time to time to see what’s on sale. I would recommend 5S voltage with 3Ah or more capacity.
Other battery options (may not fit in the container above)
hobbyking.com/en_us/turnigy-3...
hobbyking.com/en_us/turnigy-4...
Container for batteries (for 3Ah batteries used in this build):
www.target.com/p/sistema-klip...
Container for batteries (for 5Ah batteries used in updated hub motor build):
www.amazon.com/gp/product/B00...
Amazon may not carry them anymore
www.houzz.com/product/9190957...
Containers for ESC:
www.amazon.com/Sistema-Collec...
Griptape (rubber):
www.homedepot.com/p/TrafficMA...
Griptape (carpet):
www.homedepot.com/p/TrafficMA...
Spray adhesive:
www.homedepot.com/p/Loctite-1...
Screws and washers can be found at most hardware stores like Home Depot:
sheet metal screws: #6 x 1/2”
flat washers: #8
B6AC v2 LiPo Balance Charger:
www.ebay.com/sch/b6ac+v2
Parallel Balanced Charging Board:
www.amazon.com/Weyland-Parall...
Rotary tool:
www.harborfreight.com/rotary-...

Наука

Опубликовано:

15 окт 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 443

@jasonmomo7447 5 лет назад

"Just need to drill carefully so that I don't smash it to the ESC" *SMASH*

@kochusabu1008 4 года назад

...a

@masondreizehn4823 5 лет назад

Wtf bro he just stole your board and you are so chilled. I would be mad af...

@udajewish 5 лет назад

It's an excuse to build a better one

@julesl6910 4 года назад

There's an old adage that all experienced skateboards LIVE by. The board you love sits at your home, or under your arm. If you don't follow that, you're gonna have a bad time.

@divdoesmed 5 лет назад

This video helped me out soo much. I found out that I have bought parallel connector instead of series connectors so that was a life savor!!

@OLDJACKSACADEMY 5 лет назад

It has to look good at least once, legendery quote...thanks for the upload

@RameshKumar-mv3jd 2 года назад

I just finished watching all of your videos and they were really good. I hope you make more someday. You've inspired me to build a board.

@enzocalzone5298 4 года назад

Thank you for making this video! I took it as an inspiration and today I have my own working e-longboard!

@vonnblack3199 5 лет назад

Awesome job and very well explained, on a very simple and straightforward way. Thank you!

@skraggle 5 лет назад

This is an excellent tutorial. Video and audio are nice and clear and you are a natural teacher. I didn't find it too long at all, and you answered all the questions I had. Thanks for sharing!

@orensprojects7250 5 лет назад

Thanks! I'm glad it was helpful and not too long.

@orensprojects7250 5 лет назад

Thanks! I'm glad it was helpful and not too long.

@JoeyCbr 3 года назад

The Sistema containers are ace, they work really well! I thank you for sharing that idea. I modified my board with 4 of the square ones, after my battery case snapped, 3 for my batteries to go in and 1 for the controller, I had to split my battery into 3 parts, I put the cells into holders and soldered them rather than weld the cells back together, now I can swap cells out on the fly to go further and the board has some flex now too.

@roycebendure2552 5 лет назад

This is one of the best guides out here, and will probably build one just like this. Although your video states some of these, i want to make sure i have them straight. -Are the batteries in parallel or series? if either what would you recommend? -i have a few RC cars and i have a lipo balance charger, how would i charge these in the parallel or series cofig? -does it matter what wheels you have? if so, could you specify? -I don't have a grinder and i don't plan on getting one so if there are any trucks that don't need grinding that would be much appreciated. Thank you so much in advance to anyone who can help a first time builder out. I would really appreciate it.

@Brennen_Nisporic 2 года назад

I’ve seen all your videos. I would love to see you get back it friend. Your videos have helped inspire me.

@georgei2480 4 года назад

Love the DIY board stuff. im thinking of making one my self. I think the containers could use a little black spray paint to bring the look together.

@leonf.7893 3 года назад

Great video. Sorry for your loss.

@oreo-g7299 3 года назад

this exactly is the perfect build ive been looking for

@Pancake3000 3 года назад

This vid was really helpful for me to choose some parts for my board. Thanks!

@fairandhonestvideoreviews7527 4 года назад

Nice video! Detailed and short to the point. Well done!

@3D_printer_guy 4 года назад

I'm really looking forward to the test video. I hope you will make the same tests as with the hub motors. Great video!

@PracticalProjects 5 лет назад

Nice tutorial, good that you keep things simple so many people can replicate :)

@blaksin 3 года назад

excellent explanation and appreciate the small tips that i will no doubt run into in my diy, thank you

@scottcarr9253 5 лет назад

so awesome dude! Thanks for making this video, I'm going to give this a go!

@Demeetrius 4 года назад

I'd recommend using a motor with a keyway on the shaft to ultimately prevent the slipping. Also if you found one that could fit, a keyless bushing between the pulley and motor shaft might work best

@MrGarkin 5 лет назад

My man. Love your videos. Please, keep doing what you do.

@orensprojects7250 5 лет назад

Thanks for the support!

@benstart2936 4 года назад

I'm going to use this video as a referance when i build mine, thanks so much such a great video.

@GamerGotcha 4 года назад

let me know when you build your's. i wanna know what you use and if you had any problems

@johnjamce1146 4 года назад

the length is good it explain a lot

@domestron4422 4 года назад

You are the best youtuber You inspired me to start a youtube channel and follow my passion about electronics and robotics I hope someday to be my subscriberYou are the best

@wedepeixmen 3 года назад

funki GENIOUS!!!!! thnks for your knowledges!!!

@ByGraceThroughFaith777 5 лет назад

I would look for a splash guard for that thing, to many openings for water to seep into. I'm definitely building one, thanks for all the good info.

@alienforce7688 4 года назад

I really hope there be a part2 fingers crossed......

@derekw7848 4 года назад

This was an awesome video!

@luisrivas5349 3 года назад

Great videos !! thanks for making it, i will make my own E board .

@1fck1900 4 года назад

Thx for the video! Hope the Kid who stole your board will recognize that he has to change his thoughts!

@samreason9856 3 года назад

Great video !

@vichaon 5 лет назад

Well impressed with the narrative and your skills (note I can't even put nails in a wall to hang a picture...) clever build, not sure id trust battery pack and esc to be safe from the elements but hey I'm sure you had fun and satisfaction to put it all together!

@orensprojects7250 5 лет назад

Thanks! Yeah, I would not use this setup in the rain. Skateboards generally don't hold up well in wet conditions.

@TheOfficialJoel 5 лет назад

very nice video, well detailed. does the board come to a complete stop when you break? or does it go reverse like the boosted

@mikecane 5 лет назад

THE RETURN OF OREN!!! And with a great video. That ^%$# who stole the board should never have a happy day for the rest of his life! I look forward to the next video with the blue-wheeled replacement. Great work!

@orensprojects7250 5 лет назад

Thanks Mike! You're very encouraging! Yeah, it sucks about the stolen board. I'll try not to take so long with the next video.

@Santamonicadrainco 5 лет назад

Looks like mar vista, California. So many homeless and junkies running around (Venice crowd). You should send the footage to Venice high and see if they recognize the kid. I’ve had tons of my stuff swiped. Always be aware, never leave anything out. I build my own belt driven board. So much fun.

@explodinpunkins 5 лет назад

You can put rubber padding between the board and the containers before you screw it in to help waterproof it

@Fernandocoppi 5 лет назад

Hey man ! Amazing video ! May I ask , how long can you drive with those battery ?! 15km ?! Thanks

@saleh235 3 года назад

ty so much bro.. you are such a legend

@ic3gr33dy7 5 лет назад

Love those videos. NIce!

@MrGarkin 5 лет назад

We all hope for more videos in this season. 😉

@SM4616 5 лет назад

Easy too the ear and eye. Thnx

@zxcvbnm8141 5 лет назад

Hey Oren do you buy any chance have a link for your flywheel and the pulley gear for the motor ?

@MrLagteam 5 лет назад

Awesome, thank you!

@khairulamir7716 5 лет назад

Thanks, i learn a lot

@ultrakooly1807 4 года назад

WHEN YOU SAID YOU CANT GO WRONG WITH BLACK I SUBSCRIBED .GREAT CONTENT

@oliversiemens6547 4 года назад

When is the second part coming out? must be a really great video if its taking this long. or he is just busy with his house still.

@alinaochisor1531 3 года назад

hahaha

@inaamhaq2830 Год назад

very well made vid

@samuellavallee3772 5 лет назад

I hope you make a follow up video soon... 5 months later

@vishnukikkeri9187 4 года назад

im going to be 41 when your parts arrive

@michaelculhane3058 3 года назад

How long did it take to get your parts?

@duck_fieri9105 2 года назад

@@michaelculhane3058 when he will turn 41

@ElijahG98 5 лет назад

YEA BEEN WAITING AGES FOR THIS VID. Solid video as usual. Its not a short vid but thats not a bad thing. For people who haven't watched any of your other videos and need a guide on how to make an electric board theres pretty much everything they could need. I look forward to the testing video, am interested in the pros and cons v hub. I cant decide if I want to actually go ahead and start building a belt or wait and buy hub motors later. I still want to try 3d printing my mount and stuff. I got flexible filament to see if I can even print the belt but I havent done it yet because idk if the 3d printed parts are going to suck or not lol. But I do feel like belt has the ability to be much cheaper, and a single belt should out perform a single hub because you can use a much bigger motor.

@orensprojects7250 5 лет назад

Thanks! Sorry it took so long. I'll try to get the comparison video out soon. Yeah, I think a single belt setup could definitely out perform a single hub motor. 3D printing a battery container would be nice! Maybe you can create something that's the correct size for the batteries, strong enough, and also easy to open for battery swapping. That's something I haven't been able to find. For the belt it might be easier to buy one. I think they're pretty cheap and need to be very strong.

@maxwellfarnham5397 Год назад

The Tupperware custom container is clever, could use durable take-out containers if one feels like cutting a cost corner.

@chaldunalder 5 лет назад

I love your video man please make more and have you ever considered 3d printing a protective case to house everything?

@orensprojects7250 5 лет назад

Thanks! I'll try to get them out more often :) I don't have a 3d printer now. That would be a good thing to try though. I'll probably do that at some point. For these builds I try to use things other people could easily get to make their own board.

@BULPIN847 5 лет назад

Maybe some through bolts with tapered heads might hold your stuff on a little better great video thanks

@_multiverse_ 4 года назад

I suggest using rubber washers to mount the motor controller, it will dampen vibration

@dierremarshall-pernell7352 5 лет назад

Thank you, you're a genius✌

@tbone1510 4 года назад

please come back!!!

@ronaldc1582 4 года назад

What kind of speed and range do you get with this setup?

@rasoolmuth8451 3 года назад

Keep it up 👍👍👍

@Jamajalama 5 лет назад

Haha, your voice sounds just like Bert's from the big bang theory :D !!!!

@Tuan... 4 года назад

Jamajalama it actually does

@vuthu1261 3 года назад

Superb.

@matter8442 5 лет назад

Hey I was just wondering how far can this board go on a single charge? I would like to build my own however I'm not sure if I need larger batteries or if these will be sufficient enough. I love your videos keep up the great work :)

@MegaSanta5 5 лет назад

Matus Dinus keep extra batteries in your bag

@PortlandDuck007 3 года назад

that's sweet! im also building my house.. have you filmed the renovations? maybe i shoud start doing that LOL

@santanagutierrez3139 5 лет назад

Howdy Oren I like your videos and I’m interested in making my own board too. Could you do a video of how you did the electronics for the board like the batteries and the esc? And charging the battery too. It would help a lot. Thank you

@cybergaming7969 4 года назад

In what job do you do similar things as in the video? I love to build and innovate!!

@daryushnadjafi6673 5 лет назад

Fun video thx. And sharpies fix everything

@MohnishPab 5 лет назад

Hey I just found your channel and I love it! Your explanations and reviews are really awesome and I am kind of sad you havent posted a video for a while. I hope you will do some more soon :) I want to build a portable mini esk8 board that is strong uphill and your videos help me a lot!

@raptor2569 4 года назад

install a GPS to track the board.

@sarthakdas815 4 года назад

hey was wondering what chagrin solution you came up with for the skateboards

@robbi3tk 4 года назад

Hey, thanks for the video. I'm a little confused on which parts in your description I should load into my cart entirely. It looks like there are some duplicate parts? Would you be able to send me a parts list for one specific build? Thanks so much for the video!!

@AlistairBeckett 4 года назад

Great video. I’m guessing there’s not going to be a part 2

@chitun3275 3 года назад

Perfect.

@p1skates 5 лет назад

Awesome you may have just inspired me to build one and buy one. Electric skateboard I mean. Ha

@bars3402 2 года назад

Hey man! Awesome video! I was wondering if you charge and discharge the battery pack through a BMS using the same connector?

@AymNanh 2 года назад

you don't do that on belt drive. That motor will instant lock when it cut outs.(over amp) and youll kisss the apshalt from 40kph to a sudden stop.

@GuitarManiac197 4 года назад

Dying to know the range on this particular build!

@ess2586 4 года назад

If I can build s tube guitar amp, I think I can build this too....really helpful thanks!

@reptiloidx8942 4 года назад

yep same here from electronics to a real hot burNING WHEELS RIDE BITCHAZ

@johnthefox6239 5 лет назад

I am a belt man. But for ultimate performance use chain drive since there is almost no slipping.

@jonathonbarocio-pipes7931 5 лет назад

Great video. I would research Ibs/in values for torque.

@ophionnox1582 5 лет назад

Risers give the trucks a little boost but they also help reduce stress and pressure cracks on the board. I tried no risers several times and my board always ended up getting tons of pressure cracks. Don't get me wrong though risers or no risers you will naturally have some pressure cracks but they can be reduced.

@cbey2707 4 года назад

I really like your video, but can you itemize what you used in your video for us beginners. Also, can you talk more about your choice of battery, gears and wheels?

@alexvinnikov2967 3 года назад

nice review, for this small skate and type of motor mount 50series motor would be more nicer even !

@SavageKid23 5 лет назад

What size drillbit did you use to drill the hole for the truck

@Varue 4 года назад

I kind of hoped you'd keep going after the "AC vs DC" analogy, just making more and more comparisons all the way back to prehistoric times

@theanarchist2746 4 года назад

Great video man! I'll follow this step by step when making mine but I want to go for a 12s battery and ESC, since I want it to be crazy fast. 190KV should be fine for a dual motor I was told.

@brendanoconnor4802 4 года назад

A 12s system will fry the esc, go for 10s as it will still be crazy fast. I would also recommend if you’re going to go for a dual motor setup use two 280kv motors. One of these motors was enough to accelerate an 85kg person to 35km/h quite easily and me who is lighter to go at a top speed of 42km/h. So two of these with a 10s battery will be crazy powerful. If you want any help ill give some tips :)

@ynnck8534 4 года назад

@@brendanoconnor4802 hey can i maybe get some help? im wanna build an e scakteboard with a belt driven motor. is that one a good one?: www.ebay.de/itm/170KV-C6374-efficience-Burstenlos-motor-fur-Elektro-skateboard-Longboard-2900W/163597762676?hash=item26172fc074:g:F-8AAOSw6d9clZFm

@Mattiaslash25 9 месяцев назад

@@brendanoconnor4802 hi...sorry for bothering after all this time...i'm building one...would this single motor alone shown in the video accelerate me (77kg) to 30kmh? What was your single motor size and kv? Trying to optimize costs and go for the bare minimum without burning it

@cudiedgar 3 года назад

damn color those vile sandwitch boxes!!

@pcrussell50 3 года назад

Hi Oren. How did the replacement board work out in the end? Did the motor mounting and bracketry hold up well on the non-Caliber trucks?

@eduardorr77 5 лет назад

I would like to know the speed and the autonomy of that board. Nice video!

@meeethe3rd 4 года назад

Do you find these wheels hard, I have just put them on my 2nd build and it seems really rough. Don’t know if it’s the wheels or something else making it a harsh ride

@chewymee4216 5 лет назад

How do you charge your lipo?? Its too much hassle plugging and unplugging the batteries to charge using imax charger

@nucleo1772 5 лет назад

Hi Oren, I have been thinking for a long time what will be better? - ready to ride Wowgo 2s (2 hub motors) - or one big 6374 190kv motor (single belt drive sys.) with 12s LiIon batteries and single enertion vesc The most important for me is: - acceleration, hill climbs, torque Do you think one big motor with good equipmentgoodcan beat the hubs of wowgo motors?

@shehidarsircovichsassun6052 2 года назад

Does connecting the motor only to one side make the skateboard drive crooked?

@liamconlon6035 3 года назад

how do you connect the two batteries to become one a plug into the esc

@Redmongames 5 лет назад

So I'm looking at this, but I can't seem to figure out which wheels I need to use or what keywords to use?

@mikecane 5 лет назад

Hey, Oren. I was wondering -- here in 2019, now! -- whether the second board required you to grind a truck too or did you find a different truck with the right shape for the motor mount?

@lucajo16 5 лет назад

why not just get caliber 2 trucks? they are a staple for most DIY builds and there are soild mounts out there for those trucks

@angusgibsonesq6720 Год назад

I already have a 400-watt 1 wheeled electric board I need to put two 400-watt wheels on it will I have to change the control box which one should I get in the UK

@abelsosa2684 4 года назад

Whats the battery life and milage like one one of these?I think I might of missed that part. And what if I wanted the double up on the batteries if I decided to get the longest 50" board, is that possible?

@donsav4896 5 лет назад

How do you brake? Do you click the reverse button?

@9281111 5 лет назад

I’m using the dual motor version of this 10s dicky ho esc with 2 of the same 170kv motors without the hall sensors plugged in. If I plug them in will I get smoother braking? Will I lose power? Could it be dangerous if the hall sensor fails?

@d7eemo270 3 года назад

So you did not use anything else other that the ESC.. as a board or compu?

@bp5082 4 года назад

great build vid! wish I had watched this before my first. please get some skate shoes. your not old but it looked like my dad riding my board with those running shoes. sorry I highly recommend Globe