Emax Tinyhawk 3 | Easiest way to get into FPV

Подписаться 62 тыс.

Просмотров 25 тыс.

50% 1

👉Buy the Tinyhawk 3 FPV Kit: www.banggood.com/custlink/vKv...
👉Buy the Tinyhawk 3 drone: www.banggood.com/custlink/mvK...
👉Buy extra batteries: amzn.to/3GfBIdy
👉Upgrade your antennas: amzn.to/3uoZWQn
Download Betaflight: betaflight.com/
Download Liftoff: www.liftoff-game.com/
Snkrfest Chicago: www.snkrfest.net/
The Emax Tinyhawk 3 is an excellent tiny whoop and the easiest way to get into flying FPV drones. We will walk you through setup and give you some tips to help make it just a little bit better.
0:00 - The Emax Tinyhawk 3
0:30 - What you get in the kit
3:30 - Emax E8 Transmitter
5:15 - Closer look at the Tinyhawk 3 compared to Tinyhawk 2 and Tinyhawk S
8:35 - Using the goggles as an FPV monitor
9:35 - How to use smart audio to choose a VTX channel
13:10 - Tinyhawk 3 flight footage
15:38 - How to set it up in Betaflight
22:47 Check out Snkrfest Chicago
#drone #emax #fpv #tinyhawk3
==================================
👍Support us on Patreon. We give away a free drone once a month! Link below👍
/ halfchrome
==================================
Learn more about this content:www.halfchrome.com/emax-tinyh...
==================================
💥What do we recommend? Looking for a good deal? Support us by clicking on our affiliate links.
$50-Syma X8: amzn.to/2ZYW3kg
$100-Tello: amzn.to/36pNB1E
$200- MJX Bugs 16: www.banggood.com/custlink/mmK...
$300- Mini SE: amzn.to/3BffTc3
$450-Mini 2: amzn.to/3xuo9Df
$600-Parrot Anafi: amzn.to/2ZWbaed
$800-Mavic Air 2: amzn.to/3e3rn9o
$1000-Air 2S: amzn.to/2SZdKR7
$1200-Mavic 2: amzn.to/3AJKZJe
$1600: Autel Evo 2 Pro 6K: bit.ly/Evo2HC
$2100: Mavic 3: amzn.to/3o3ov0e
==================================
💥Racers/FPV
DJI iFlight DC5 package: www.banggood.com/custlink/DGK...
iFlight Nazgul: www.banggood.com/custlink/mKm...
Tinyhawk all-in-one: amzn.to/2FLWmFQ
Tinyhawk S: amzn.to/2FJ0dTP
Mobula6: www.banggood.com/custlink/GKK...
==================================
💥FPV Gear
Radiomaster TX16S: www.banggood.com/custlink/mGv...
FatShark goggles: amzn.to/2BDPaMd
Skyzone FPV goggles: www.banggood.com/custlink/D3K...
Budget FPV goggles: amzn.to/2MuAGU4
BetaFPV Lite Radio: www.banggood.com/custlink/mDv...
==================================
📷Favorite Cameras
Sony a6600: amzn.to/36QEjuD
GoPro Hero 9: amzn.to/32ZVXLg
iPhone 12: amzn.to/36RU1FV
Insta360 Go: amzn.to/31j5gGc
==================================
We use Audiio to add music to our videos: You can save 10% on a subscription with the code HalfChrome10. Follow the link here: www.a2zdtrk.com/HalfChrome10/
Music we use (and love)
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library • Adventures - A Himitsu...
Rock Angel by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Video
Vibe With Me by Joakim Karud / joakimkarud
Music promoted by Audio Library • Vibe With Me - Joakim ...
Summer by Ardi Rida
• Video
==================================
Extra Deals: bit.ly/BGdealsFeb21
👉Learn More: www.halfchrome.com

Наука

Опубликовано:

9 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 153

@David-kg1hc 22 дня назад

Literally everything I was searching for in one video! Thank you sir.

@HalfChrome 22 дня назад

You are welcome.

@dougcooper4917 2 года назад

Excellent Tutorial and Review Jack! Very Well Done! Thank You.

@HalfChrome 2 года назад

Thanks

@maurosegurah Год назад

That was awesome review sir. Nice job!! Super helpful!

@ChevyBased 4 месяца назад

Thanks Dad, I mean dude! Kidding! Really though, thanks. I really couldn't figure out why my video quality was so poor. I was ready send this TinyHawk to Valhalla. Now Im having a blast with it!

@GodsHeretic 2 года назад

Hands down THE best review on the Tinyhawk 3. Really eager to hear your thoughts on the GEPRC TinyGO 4k now.

@HalfChrome 2 года назад

Thanks. Haven’t flown it

@GodsHeretic 2 года назад

@@HalfChrome If it's in the budget in the near future, point me in the right direction and I'll gladly shell out some clams towards the cause!

@Drew18000 Год назад

Love the aquarium. I just ordered this drone. Great review and thanks for the betaflight info. New subscriber here.

@HalfChrome Год назад

Thanks

@darkmonk99 8 месяцев назад

Amazing help buddy, much appreciated to get a better flying experience, this little quad at the park i tell people "This is my little friend" Lol - thanks again

@jkspinalchoice 2 года назад

Great tutorial! Thank you! 🙌🏻

@HalfChrome 2 года назад

Glad to help.

@jkspinalchoice 2 года назад

Geprc 25 do you have any feed back on that quad? I'm hoping you do because t your tutorial was so detailed and informative, I can only imagine what it would be like going over the geprc 25!🙌🏻

@genefoxgreenmountaindroning 2 года назад

Hi jack I wone the eachine wizard 220s from you a while back iam totally dumb when it comes to technology lol I finly got it to arm the motors with help from a friend on RU-vid. Thank you so much for the nice quadcopter. And all you do

@HalfChrome 2 года назад

Thanks. Glad you got it flying. Enjoy it.

@TheJoker6789 2 года назад

I was never going to be able to use these goggles I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀

@aerialcombat 2 года назад

Nice case!

@HalfChrome 2 года назад

It’s a good one.

@DuranMediaSolutions Год назад

Fantastic video and content!! A+++

@HalfChrome Год назад

Thanks

@FlyZoneFpv 2 года назад

Great review on TH3 & tutorial on betaflight jack. Wow the basement looks great now brother. You did great job👊🏻

@HalfChrome 2 года назад

Thanks. Months of hard work finally paid off.

@murdochninetyeight505 Год назад

great video. Is there a way to fly stick mode 3 on this drone? Mode 2 reversed. Thanks

@bellis7077 2 года назад

I love this detailed Tinyhawk 3 review. Thank you. You mention upgrading the antenna at time 23.39 to FOXEER FPV 5.8G 2.5dBi Lollipop Antenna. I am using the Tinyhawk 3 RTF kit to learn how to fly the drone FPV and not line of sight. I am currently doing laps around my ground floor, not fast or pretty but successfully. My first drone, bought as a distraction because of COVID last summer, was a GEPRC Crocodile Baby 5 DJI version with the DJI goggles and controller. My only concern at the time was being noxious while viewing the flight through the goggles. I was so wrong. I could not fly the Crocodile Baby 5 as it is way beyond a beginner’s skills. I am a senior by the way. I plan to use the Tinyhawk as my winter indoor go to toy. Will attaching these Lollipop antenna to the EMAX monitor noticeably enhance the video reception indoors and out?

@HalfChrome 2 года назад

It will be marginally better picture and more range.

@bugsy742 2 года назад

Yes it definitely will improve your picture- anything that gives better range will by default give you a much better picture and it can be shocking how much it benefits, the biggest help is more vtx power 👍🤜🏻🤛🏻

@Fraggelfluff Год назад

@@HalfChrome If I upgrade the antenna do I need to buy two antennas or just one?

@HalfChrome Год назад

Go with 2

@vizzieizzy 2 года назад

I really hope you see this. First a huge thank you for this video. I'm beyond frustrated. I have flown RC planes, jets and helis for over 25 years. Got into fpv and got lost with betaflight (you helped with that) I bought a leader 120 and it's still new in the box lol. So I bought the tinyhawk 3 rtf bundle. Received it today and from the first flight and 5 since it has a medium pull to the left and tiny pull to the aft. I did the stick recalibration on the tx, no fix. So I read re-balancing the gyro or accelerometer in betaflight can fix this. I'm about to use beta for the first time. I hope this works, I just want the TH3 to fly straight. Any advice please let me know. Thank you again you got a new sub.

@HalfChrome 2 года назад

A gyro recalibration might fix this. Give it a shot. Good luck

@xWazzuuup Год назад

Dit it fix it for you then?

@sinout044 10 месяцев назад

You mentioned a fpv simulator? Can you send me a link and can I use the tiny hawk remote?

@peterkennethnuevo7969 Год назад

Great video! I'm considering buying this as my first fpv drone. Can this drone bind with flysky transmitters?

@HalfChrome Год назад

No. Frsky only

@RSMTRASHCAN Год назад

Just got the rtf kit and I'm already flying pretty well but it does have a drift to the front right and calibrating on beta flight doesn't seem to fix it Also this is my first fpv drone and I'm just wondering how I should upgrade my drone goggles antennas whatever once I feel like it's time to so if anyone has any recommendations that would be appreciated

@joserafa03 Год назад

Hi ! As soon as I watched your video on the Emax Tinyhawk III, I purchased it and Subscribed to your Channel ! As I was trying to verify the binding I took the Canopy screws out in order to reach the Binding Button which is deep inside the Camera Canopy or Housing. After I verified the binding to my satisfaction I noticed a LOOSE RED CABLE ( measures about 1 - 1 1/2 inches long )on the rear right of the circuit board and it is soldered to a point on the Board which reads 5 V. I am not sure if this RED CABLE was already loose or if it goes to a certain soldering spot or if it is a convenient 5V output to be used on some modification...... I will like to know if your Emax Tinyhawk III has this loose cable of if it came loose when I was doing the binding... if it goes somewhere, where is it supposed to go ? The loose end show no wire coming out of it or any solder attached. Please help me out ! Thank you !

@HalfChrome Год назад

Could be an antenna? Does it not work? You should bind using the CLI.

@sardanapalos 2 года назад

can you use this goggles and radio on a cinelog 30 for example, if i want to upgrade after this ? or should i buy new ones?

@HalfChrome 2 года назад

The goggles will work with any analog drone. The remote will work with any D8 drone

@guidokruijver2925 Месяц назад

Question, what is the best lift off version (micro?) on pc to practice with the remote control ? 🙏 Thx.

@HalfChrome Месяц назад

I like Liftoff or Tiny whoop go

@armanclark2401 Год назад

13:48 what sim are you talking about? id love to learn as mine is in shipping now

@HalfChrome Год назад

I like velocidrone and liftoff

@Vinnyberardi Год назад

I can’t get mine to connect to the computer

@mattalford3932 10 месяцев назад

I dont think the HV wears these batteries out. They dont even get warm and still take an hour to charge. HV batteries are designed to be charged on the HV setting.

@angelao Год назад

This is my first FPV drone and I love this little thing. However, I keep trying the button-battery combo and can't get the VTX to change to save my life. Can't figure out what I'm doing wrong. Eh. Still a great little machine. Thanks for the Betaflight tips!

@swimbeyonder 3 месяца назад

I have a problem with my tinyhawk2, I binded it with the radio, and on betaflight I can see the switches and input actions as gas, yaw pitch and roll working, I also added the arm control, and other 2 as I see in videos, but then, if I power it up with the radio binded it doesn't fly, althought the leds blink wile giving inputs from the radio (that shows that the binding is correct) the props don't spin, it is not working.... can you help??

@HalfChrome 3 месяца назад

What does the OSD show? Should flash some error

@blueballs5150 Год назад

You seem like the person to ask so if I am thinking of getting a fpv drone and I’m trying to spend $500 or less, is there a good kit for around that price or should you get different components ( drone, goggles, etc.) to use together? I’m looking for a quad that would be good for outdoors, good flight time, good flight distance but, I’m not using this for professional pictures so I don’t need the best camera. And I wear glasses so that might be a problem for some of the goggles. Thanks for your time and research on all these quads

@HalfChrome Год назад

This is an excellent kit. Yes. You could put a better kit together. I really like the Radiomaster Zorro and these Transporter 2 goggles are a good start. That would be about $180 and you could choose your quad. I’m a fan of the Nazgûl but I do think there’s real value starting g with a small drone like this.

@blueballs5150 Год назад

@@HalfChrome thank you very much. Is there a certain model of Nazgûl that’s good and are there any other really good quads you would suggest? Again thank you so much for your help

@TechOffZedOn Год назад

great video, thanks! I can't crush flip (turtle mode) with my Tinyhawk 3, it just brake dances all around on it's back. Does it work for you? Are the motors too weak for that?

@HalfChrome Год назад

It could be the surface it is crashing on. If it is this grass or sometimes a slick surface it won’t turtle properly.

@TechOffZedOn Год назад

@@HalfChrome No it is just the parquet flooring in my apartmant. It is somewhat slippery, so the drone just slides on its back all around

@TechOffZedOn Год назад

@@HalfChrome You had no problem like this? :O

@HalfChrome Год назад

It should work. Try different directions. I’m assuming you didn’t swap the props. It doesn’t work on triblade but should with quad blades.

@TechOffZedOn Год назад

@@HalfChrome well, I tried all directions, and the Tinyhawk III comes with 4 blade props by default :)

@user-fv3ls1xj4u 10 месяцев назад

Which microSD card will work?

@HalfChrome 10 месяцев назад

Most high speed SD cards will work. I suggest Sandisk

@johngreen5837 Год назад

Could you show me where the bind button is? I bought a jumper t lite jp4in1 with elrs, I've got it set up, but I can't find the bind button on the th3

@HalfChrome Год назад

Don’t use the bind button. Go with binding via betaflight.

@johngreen5837 Год назад

@@HalfChrome I found it. No betaflight till tonight. Lol

@skairkrow9800 11 месяцев назад

what if you wear glasses? are there in-expensive goggles for glasses out there?

@johnpendl4897 Год назад

Hi I know it’s an old video but is it possible you could tell me if emax transporter 2 headset is sma male? I’m looking to buy the kit and would just like to order antennas at the same time. I used your link to look at antennas I would just like to make sure it is accurate thanks

@HalfChrome Год назад

I’d check but I gave mine away.

@johnpendl4897 Год назад

@@HalfChrome ok thank you

@liamrichards7945 2 года назад

Hi can you help me please. I changed my channel from 4 to 8 then 25mw to 200mw and set. After this I can no longer connect the FPV regardless of the channels I select. Do you know how I can fix this? Much appreciated

@HalfChrome 2 года назад

You need to unlock the VTX.

@averagejoeadventuretours4571 Год назад

@@HalfChrome can you explain how to unlock the VTX? I’m in the same boat as this guy. I bought this as a starter FPV and now I cant connect and cant figure out how to do this though I’ve been searching. Thanks

@HalfChrome Год назад

I walk through it in the video. Hold VTX button down. Plug in battery. That’s it

@thomasneubauer4885 Год назад

I am having the exact same issue and still don’t know how to fix it!

@HalfChrome Год назад

I show you how to unlock the VTX in the video. Hold down VTX button while plugging in battery.

@vShoyo. Год назад

I changed my band and channel now no picture pops up what do i do?

@HalfChrome Год назад

Change channel and vans to match on receiver. Make sure you unlock your VTX.

@mikehrenak1390 2 года назад

Damm Sam air2 s army out

@HalfChrome 2 года назад

2nd is still alright

@snippzi Год назад

Someone please help me I did the exact same thing he did for the screen connection thing at 11:00 and now I can’t see anything at all if someone knows how to fix this please message me asap

@HalfChrome Год назад

Unlock the VTX. The video explains how.

@tokanite Год назад

Changed to raceband 8, immediately lost all signal and can't find video even with auto search. Now I can't change setting back either because I can't get anything to display on the screen except pure static on every single channel.

@HalfChrome Год назад

You didn’t unlock the VTX. Unlocking it will fix issue. I walk through that in video.

@tokanite Год назад

@@HalfChrome Okay got it to work with that, thanks

@Adec-Lawns 4 месяца назад

What does unlocking the drone do

@HalfChrome 4 месяца назад

Unlocking the VTX allows you to use more channels on the goggles

@Adec-Lawns 4 месяца назад

If it’s locked can I still change the vtx output power and I’m using the Tinyhawk 3 plus

@HalfChrome 4 месяца назад

@AdzyYT I’m not sure. You can try

@mrlefko59 2 года назад

** Be aware ** Don't bump up to 200. I did this and it fried my flight controller. It's a $179 part. Hobby shop said this drone is not designed to handle that kind of milliwatt.

@ChuckPheltnic 2 года назад

Yeah, especially if you just have it sitting around and on. In flight the airflow should keep it cool, but I would only turn on 200 if you need to, not just the first thing to do if you are just learning.

@bugsy742 2 года назад

No the vtx did not fry your Esc, it can fry itself but definitely not your Esc unless of course it got so hot it melted things 😱👍 Your hobby shop doesn’t know what they are talking about and if possible you should shop somewhere else 👍🤜🏻🤛🏻

@calcifiedbonecollector3222 Год назад

What a nonese! Don't listen to this guy!

@angusmcgrath78 Год назад

I put the channel to 8 and now it doesn’t work and I can’t put it back

@HalfChrome Год назад

Unlock the VTX. I show you how in the video. It is locked in channel 8

@kalangaertner6729 Год назад

I changed to raceband 8 and boosted the power to 200 and as soon as i hit confirm my drone disconnected from my goggles and wont reconnect

@HalfChrome Год назад

Because you didn’t unlock it. I walk through that process in video. Can’t skip it.

@kalangaertner6729 Год назад

@@HalfChrome Ive tried to do that multiple times and i still cant get it to bind is there a way to see if it is locked or unlocked using betaflight?

@HalfChrome Год назад

So you’ve unlocked the channel? Then change channel on goggles. You can confirm the channel on betaflight. Check this out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I30Csn5tebQ.html

@kalangaertner6729 Год назад

@@HalfChrome I have did that and it didn't work but i did a CLI dump and now i can get it to connect but i haven't tried changing the settings again EDIT: I used betaflight to change to receband 8 and boost the power to 200 and now it works fine.

@HalfChrome Год назад

Glad you got it working

@dagalpup1278 Год назад

I bought a tiny hawk 3 and I tried to do what you did and change the channel and power to 200 but idk what I did after but Idk if it cause i changes the channel or did save and exit but it basically made the goggle be static on all channels and I mean all channels, the drone could be turned on and would beep in beeper mode but would not connec to the goggles and the controller didn't either, so I messed it up when trying to do those little changes, I returned the drone and another one is coming in tomorrow, I don't want to mess up the next one and want to understand how to use this drone, do you have any ideas as to what I did to mess up the drone?

@dagalpup1278 Год назад

Why does your pit turn from off to on after you set your power to 200?

@HalfChrome Год назад

You didn’t unlock the vtx. That is step one

@HalfChrome Год назад

It isn’t pit mode. You are on a locked channel. Unlock your VTX

@dagalpup1278 Год назад

@@HalfChrome hey sorry I didn't see your reply until today, I got another tinyhawk 3 and it's working fine, but I haven't unlocked vtx yet, is that when you hold down the button on the drone and plug in a battery? I also got the better antennas, do they work immediately just by putting them on the goggles or do you have to do something for that as well, thank you for being very helpful your videos are amazing, I've already had a blast with the tiny hawk 3 so far, but know I can improve it, can this fit a insta360 go or no? I feel really stupid but I really do appreciate your help I was able to get the drone onto 200 out put and that's been really fun, I just really want to understand everything about this, I still don't fully understand that hud you can pull up by going left on the left stick and up on the right stick, I feel like it's complex but it's probably not, again I'm sorry for writing so long and I want to thank you again because either way your video was very indepth compared to all the other videos on this drone and made it alot easier to understand it, keep up the great content, can't wait to see more cool stuff, who knows maybe they might a tiny hawk 4 in the next couple of years?

@dagalpup1278 Год назад

Love the vids the channel is🔥

@zuzuwuy Год назад

I can not seem to get this thing to bind to my emax E6 transmitter somehow...

@HalfChrome Год назад

Are you following the bind instructions on the manual? Did you put it in bind mode via CLI or button?

@zuzuwuy Год назад

@@HalfChrome Via the button, it goes into a blue static LED and then I turn on my E6 transmitter that I got from my Tiny hawk 2 Freestyle RTF kit. Put that into binding mode and from there nothing happens. I'm a tad confused

@HalfChrome Год назад

Plug into betaflight. It may help understand what’s going on. Use the CLI. The button might be the problem. It should have come already bound

@zuzuwuy Год назад

@@HalfChrome I only got the quadcopter separate, not the kit. I am trying to bind it to my E6 transmitter (The white controller one) that I got from another kit (with the TH2 Freestyle) but it won't bind. And they both have the FrSky D8 protocol so it should work.. that's whats confusing me. I think this transmitter is still bound to the Tinyhawk2Freestyle but I can't like unbind it as the manual suggests

@zuzuwuy Год назад

I bought the Tinyhawk 2 Freestyle kit but it's toomuch for me and I can't fly indoors so I got the Tinyhawk 3 to be able to practice indoors and is less powerful. I'm trying to bind it, but it won't that's the issue :p. I've scavenged through the Emax manuals but nothing clearly states how you should do it. Kinda sucks in terms of starting out lol

@nathandickerhoof6567 2 года назад

I switched my Chanel to 8 but when I try to look at it on my screen it doesn’t show anything

@HalfChrome 2 года назад

You need to unlock the VTX

@nathandickerhoof6567 2 года назад

@@HalfChrome how do I know if it’s locked or unlocked

@nathandickerhoof6567 2 года назад

@@HalfChrome I got it thank you

@HalfChrome 2 года назад

Great.

@sardanapalos 2 года назад

so i followed your advice on 9:44 and put it on channel 8 and changed the VTX , now my monitor cant connect to the radio ( i get that grey no signal picture like when you auto search) i restarted it , used the right pin to shut it down or maybe reset it , tried the default option in the monitor menu....what happened? how can i fix it? clearly i m a begginer....

@HalfChrome 2 года назад

Unlock the vtx.

@sardanapalos 2 года назад

@@HalfChromecant access the menu as you did in 9:44 now ... i use the sticks and nothing happens ...

@sardanapalos 2 года назад

@@HalfChrome used betaflight and i m on R/8 , i go manually to the monitor on R/8 and i still cant connect....pfff

@HalfChrome 2 года назад

Did you unlock the vtx?

@sardanapalos 2 года назад

@@HalfChrome i pressed to unlock it, changed the band(raceband), channel (8) and power (from to 25 to 200). then i prassed set, confirm , save exit, as you dit it on the video... now i cant get signal at all ....

@dondupuis4007 Год назад

What goggles are you daily flying goggles?

@HalfChrome Год назад

I use these. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qkHXlJwmQNo.html

@ernestziegenfelder9962 Год назад

Yeah changing the channel messed everything up for me 🙃

@HalfChrome Год назад

Unlock it. I’d you didn’t unlock it you won’t be able to see other channels. I walk through the process in the video. It’s easy.

@ernestziegenfelder9962 Год назад

@@HalfChrome ohh I see you showed how to reset it afterwards. Thank you!

@jordansanchez6830 Год назад

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

@Eroc556 2 года назад

For me I think the best starter kit is the DJI FPV…… its a superb drone and if you use common sense with it you can start on normal and work your way up ……

@bugsy742 2 года назад

😅🤣😂

@calcifiedbonecollector3222 Год назад

Really?A drone that is irreparable by yourself? Absolute nonsense comment!

@Eroc556 Год назад

@@calcifiedbonecollector3222 yes really asshole, it is the BEST!