Engine stand upgrade (1 year later) Questions answered, and testing

Подписаться 2,7 тыс.

Просмотров 9 тыс.

50% 1

This is a follow up video of a previous one I did on upgrading a Harbor Freight engine stand by adding a worm gear harvested from a $40 winch.
That video had a lot of views, and some great comment strings. Hopefully this video will answer any questions you might have about the project.
Thanks go out to all the contributors who commented on the previous video. your input will greatly help others and in this case, has helped to fine tune the outcome of this project.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@dougaustintx 10 месяцев назад

I appreciate you addressing the questions and comments raised in your earlier build video.

@bobrossi1185 10 месяцев назад

Nice mods half people that comment have no idea how winches work even if didn't work you could add pawl to lock the gear and you could still use pin pair vise grips to locking down. 90% of time engine is going to be right side up or top side down but when putting heads on 35 to 45 degrees it's not spinning around on it own. Great stuff ,no matter what it's pain in ass to mount engine to engine stand off cherry Picker over head hoist is so much better.

@MikeyMack303 3 месяца назад

Thank you for the update!

@juanmangerita 8 месяцев назад

Slot the holes on the bracket that way you can preload the gears and eliminate the washers

@davidgeibel1331 7 месяцев назад

I think having the worm gear mounted on top would eliminate most of that slop.

@Twilightzoneisreal 8 месяцев назад

Well done in the back yard.

@davidhollingsworth5665 10 месяцев назад

You just now figuring that out damn it man we did this in 8th grade shop class in 2003 no shit. Lol boy thinks he just invented something lol 😂

@AlexPlatacis 10 месяцев назад

LoL

@pmd7771969 6 месяцев назад

It needs rollers

@pmd7771969 6 месяцев назад

You need a hoise

@pmd7771969 6 месяцев назад

Worked on them for 35 years. Junk

@saneauto 11 месяцев назад

I was gonna say allthread and nuts but I actually like your bolts with jamb nuts better

@DanTheManIOM 11 месяцев назад

I think I have at least 3 engine stands and no desire for a 4th with a crank, but I am heading off to get the crank assembly in a few minutes. Thanks I like taking the "attachment" part out and bolting that to the engine, then swinging that to fit the receiver, but if you weld it up, it is what it is.

@pmd7771969 6 месяцев назад

Make sure you have a full load on the device when you align the gear assembly