www.rme4x4.com/threads/diy-ge...
The 2 main components of this project are tractor trailer brake pieces; A 10 spline S-Cam shaft and a matching 10 spline Manual Slack Adjuster. The S-Cam is a large, splined shaft which the slack adjuster fits into. The slack adjuster is basically a worm-drive gear reduction unit, when the small bolt on the side of the Slack Adjuster is turned, the S-Camshaft spins.
Here's the ones I used;
S-Cam ($47) - extremebrake.com/product/s-c2...
Slack Adjuster ($35) - amzn.to/3F7lMdq
The other components of this project are Pillow Blocks & a couple pieces of steel. (The S-Cam has a 1 1/2" shaft diameter, so I found Pillow Blocks in the same size to match.)
Pillow Blocks, 1.5" ID ($31/pair) - amzn.to/3mbzogs
28 дек 2021