Engine Sump, Rudder, & Pipe Mounting Made Easy | Radio Controlled Model Hydroplane Racing Boat Build

M5 Performance Hydroplanes - Scott Meyers

Подписаться 9 тыс.

Просмотров 5 тыс.

50% 1

The Radio Controlled Model Hydroplane boat build continues in this video as we discuss building the engine well, pipe mounting, and rudder bracket. Is it a thrilling video, no, but will it be thrilling in the end, YES!
Watch the whole playlist to catch all the details and then build your own... I'll show you how!
• Building a Radio Contr...
Subscribe to the M5 Performance Hydroplanes RU-vid Channel;
/ @m5perfhydros
The engine mount isolators from McMaster-Carr - www.mcmaster.c...
Here are some of the tools and other stuff I use daily;
amzn.to/3iD3ZVK G/Flex Epoxy - This is the one you want for all framing construction
amzn.to/46yplYy Butane Torch seen in my videos
amzn.to/3vXd7Yc Digital angle gauge
amzn.to/3W6KILn Awesome Dewalt clamps - The Best - Go get 'em!
amzn.to/3Fiw0tA 1-2-3 Blocks as seen in my videos - Super Handy!
amzn.to/3jl3f7R Wood Craft Picks for making perfect little radius fillets
amzn.to/3kbMdcq THE BEST epoxy application brushes - no stray hairs! Luv em!
amzn.to/3xB0H9r Craft Sticks, for making slightly larger radius fillets with epoxy
amzn.to/40R9zVl Total Boat Flotation Foam - Awesome stuff!
amzn.to/3XtMlSU Dremel wood cutting wheel. Get the mandrel too;
amzn.to/3QAtfIy Get this Dremel mandrel for mounting the cutting wheel
amzn.to/3SSBeC2 Dremel Carbide Tooth Cutting & Grinding Bit
amzn.to/3XKWXh1 Cordless Dremel Rotary Tool - Ditch the cord!
amzn.to/3wHnHmG Dremel Right Angle Attachment - Best. Tool. Ever!
amzn.to/3ISiAqF Angle Protractor as seen in my videos - A must have tool!
amzn.to/3XxuKK1 Starbond Flexible Medium CA - The only CA glue you will ever need
amzn.to/3JjNRTR Half-Inch Hobby Blades as seen in my videos
amzn.to/3Hph3rp Digital Scale for epoxy measuring and mixing
amzn.to/3DtueFm West Systems Colloidal Silica (Hey, YOU try to pronounce it!)
amzn.to/3CW6DwJ 48 Inch Aluminum Straightedge - Gotta have it!
Need tools and parts to complete your build? Check out the links to see many of the tools and supplies used in this video series. Disclaimer - as an Amazon Affiliate I earn a commission on stuff in these links. And by commission I mean pennies, but, yeah, well, it's something.
But have no fear! You pay nothing extra, only get great parts!
Wesley's Custom Graphics - Here's where you get all the graphics to complete your build; www.wesleyscus...
Finnish plywood from Aircraft Spruce available here in metric sizes; www.aircraftsp...
Domestic birch ply from BalsaUSA; shop.balsausa....
Need to build your jig first? Watch this video and I'll show you how! • RC Hydroplane Construc...
M5PerfHy... -- M5 Performance Hydroplanes is on Facebook!

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@darrenhogue 10 месяцев назад

Scott, maybe I missed it? the link for the isolator mounts from McMaster car.

@M5PerfHydros 10 месяцев назад

I forgot the link! Fixed it, thank you. Here you go; www.mcmaster.com/94955K22

@georgevprochazka5316 9 месяцев назад

Ok, I asked in another vid how to build a JIG, well I found it. However, I really can't find your vid on gluing the (top) skins. Can you help ? Thanks !

@M5PerfHydros 9 месяцев назад

Of course! Here you go - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BsQRjRKc_as.html

@georgevprochazka5316 9 месяцев назад

Thanks for the info! I have another question regarding the ride pads "off" angle. I'm not sure if both ride pads are sloping in the same direction or if the slope is a "toe- in" style i.e. sloping towards each other.

@lenturtle7954 Год назад

Now that you are almost done . I could send you a dumas kit or two to build To keep you entertained !!🎉

@M5PerfHydros Год назад

Ya, no, build 'em yourself!

@mikee9568 Год назад

Scott, because of your videos, I just ordered a 1/10th model 172 kit from ML Boatworks. I’m a long time RC car guy, and a woodworker so building my own kit interests me. Any advice anyone has would be greatly appreciated. Probably never race it but I want to build it race worthy just in case. BTW interesting fact, I live 2 blocks from Gougeon Brothers the guys who make west systems epoxies

@M5PerfHydros Год назад

Don't blame me! Good luck with the build Mike, and don't hesitate to ask questions. I'll always help when I can

@billschaare4835 Год назад

Scott, lovin' the videos. Considering buying an MLB 1/8 172 kit to be built as U-12 Graham Trucking. Getting my feet wet with an Aquacraft nitro Miss Vegas in the mean time. Been flying/building large rc planes for a while. Some of the larger scale flyers, mostly jets are using gyros to help smooth out flights of these planes. After watching last 2 H1 full scale races and watching how canards work, do you think a gyro could be used to control a movable canard on an 1/8 or bigger scale hydroplane? Like you I can't keep well enough alone and this is one of my brainiac ideas. Thoughts? Also, how much does balance or center of gravity front to back on boat effect attitude in the water? Appreciate your help.

@M5PerfHydros Год назад

It has been tried, unsuccessfully. It simply cannot track the constant motion and bouncing of the boat, and cannot react quickly enough

@darrenhogue 10 месяцев назад

Scott,where are you getting the Blue Silicone Hose? I found some from Flextech but it doesn't show the temp rating.

@M5PerfHydros 10 месяцев назад

Here ya go amzn.to/3T36tfI

@merlinnicholes5649 Год назад

You mentioned that you added structure on the rib further back. I must've missed it. What did you add?

@M5PerfHydros Год назад

Sorry I'm not sure what area you're referring to?

@mikehenriksen9567 Год назад

Scott, is there any reason other than fitment under the cowel that I shouldn't get the motor mounted as far forward as possible?

@M5PerfHydros Год назад

Too much weight in the front will pound the nose, but ya, it's hard to get to the point of too much weight. I shoot for having the glow plug or spark plug in line with the sponson transoms. Lately though I've been thinking that a little bit forward from there might be better yet.

@leonardrayner4126 Год назад

Hello Scott I missed what size engine you were in your boat?

@M5PerfHydros Год назад

It's a .67 CMB

@SomeGuyInSandy Год назад

Muffler link? Nice build btw!

@M5PerfHydros Год назад

Here ya go! seaducerboats.com/search?type=product&q=Muffler

@SomeGuyInSandy Год назад

@@M5PerfHydros Thanks, I'll order one to test it out!

@M5PerfHydros Год назад

I'm noticing in their pictures that they've slotted one end presumably to have it slip fit over the end of the pipe. This is workable, but if you'd rather attach it with silicone and zip ties as I've done, you might want to contact them to see if they will build it without slotting the end

@SomeGuyInSandy Год назад

@@M5PerfHydros Thanks for that. I'll see if I can get in touch with them. I appreciate the follow through!

@michaelgurchiek862 9 месяцев назад

I would like build my own powerboat for the first time where do I start

@M5PerfHydros 8 месяцев назад

Get a kit, watch my videos, and go for it! mlboatworksrc.com/

@davidjohnston2013 Год назад

What diameter props do you run on your boat? Love your videos keep up the good work

@M5PerfHydros Год назад

My current favorite is an ABC 2315-19-38 that I rework myself. In the ABC numbering system the first two numbers are the diameter in inches, in this case 2.3" or 58.42mm

@maegenyoungs2591 Год назад

Hey as a stupid tip, using the neck of a .50 caliber cartridge will allow you to change pipe size and length for more torque on some size gas engines

@M5PerfHydros Год назад

Shhhh! I have many sizes of brass inserts

@bigddaddy478 Год назад

I made a video also on Brent Byer's solid flex drive. I've recently noticed that every six runs I have to replace engine bearings. I'm making an educated guess that the bearings are taking on the thrust load since the flex cable is no longer taking the load. Performance is by far excellent but increases maintenance.

@M5PerfHydros Год назад

Interesting. That has not been my experience, having never changed a bearing in any of my Nova Rossi's until finally one that got rough earlier this year. Time to review your after-run program maybe?

@templeton3504 Год назад

Oddly enough I wondered if the rudder would work on the side too but being an absolute new guy to the sport, I wasn't sure if this would pass inspection. I've not seen anything that says one way or the other.

@M5PerfHydros Год назад

Hope it'll pass because it's done!