Engineering a plane, inside a plane, inside a plane! 

Now put a plane, inside a boat, inside a car

The more matt makes planes, I get more concerned for aviation

If you add enough wings to something it becomes a plane. Engineering with Matt.

Loved the plane inside a blobfish inside a box!

Can you try building a fully controllable Flying Bridge

i love that your voice goes quieter when ur underwater. pretty funny and great editing! merry bridgemas and keep making bangers m8!

The 2nd plane is just a big container with rockets lol

Matt, the center of lift must be slightly behind the center of mass! This is the main rule of airplanes. Otherwise, plane becomes unstable and will flip backwards of forwards. All you have to do is move wings a bit back, or delete some wingage in front. Also applies to vertical stabs (if it flips sideways). Also applies to KSP.

Nice video, short but entertaining! It was actually you that inspired me to play Trailmakers in the first place! I love playing Trailmakers, and have a few pointers to help with future videos :) - If you hold CTRL and double-click a block, it will select all blocks of that type - Thrusters that are inside of a vehicle will still provide thrust - You only need a small amount of detachable blocks set to "make scrap" (like one per plane) - If there are blocks holding things together, like the tail of your smallest plane connected to the blobfish or the thrusters holding the two halves of the blobfish together, detachable blocks will basically do nothing - You can use logic blocks (the "OR" block is my go-to) to give parts multiple commands; for instance, your wing servos can be both roll (a/d) and pitch (s/w). Assign one set of commands to the logic block and the other to the servo itself. - Take a look at the workshop for some crazy builds! Hope that helps! ---Sintel

A plane, inside what briefly looked like Vader’s TIE fighter but turned into a blob (with the tail fin of the small plane clearly stuck to the roof so it wouldn’t detach!), inside a huge box with token wings stuck to it that couldn’t fly and so technically wasn’t a plane… Now do this in KSP

I think you need to change the settings on the first detachable blocks you put down and change them to make scrap, then it might scrap the whole second plane.

The reason why the small rocket didn’t separate from the medium rocket in the first place was because the tail fin was attached to the roof, also if you turn on advanced controls on the configurator, there is a setting to destroy the thing your detaching.

Damn I remember when Scrapman did this years ago, crazy how time flies.

Everytime I hear Matt say “that looks like a plane” in a video, the more convinced I am that he has never actually seen a plane.

the middle plane was good, might've set the engines at the rear up on one of the detachable blocks and set some rockets that fire when you triggered the release

You definitely need to make the "PLANE-CEPTION" break the sound barrier

the first and second layers are pretty good planes. the third layer is a box.

The attention to detail in the edit to muffle the voice whenever we’re underwater is impressive and appreciated and adds so much! Thank you!

Love the change of his voice when underwater, nice touch editor 👍

i think the engines were keeping the second plane together even though you put detachable pieces all around except on the engines, that's why the small plane always got stuck.

the tiny plane is adorable, needs a wheel on the tail though. its like a tiny shark plane.

The issue you had with plane 2 not dismantling is because the cassis was still connected to the tail, so both sides where still connected. Love your videos!

i love how you muffle the audio when you are under water

RCE you were trapped because the wings of the little plane were sitting on a ledge, if that wasn't there it should probably drop out of the bottom. The self destruct was pretty cool looking though!

Matt. When it comes to aircraft, you should just make bridges from them. 😄

2:57 Hi, so the reason your plane is sliding away is because the skis are coded in a way that they slide on icy surfaces. The aircraft carrier isn’t made of anything so the game counts it as everything(so also icy). The weight of the plane at the back is forcing it to slide to that way.

The plane videos are always the best

As a experienced TM player i can say its enjoyable and painful to watch at the same time, good work! Also 9:52 you can holnd ctrl and double tap to select all the same type of a part.

Nice! Really lovely done :D One suggestion would be to have the detatchable block in the middle of the engines of the "middle" plane too, to make it seperate in 2 halves

Day 110:Dear Matt, I have a very good video idea Gather all your editors and make them all have a fight on like a PvP game (e.g. Minecraft,Rust,Ect,ect...) And see who is the best editor and is worthy of the rank of a classified engineering. From me.

To have better control of a plane's axis, you need to reduce the speed at which the wings move when changing direction. A gyroscope can help keep your plane from spinning too much when making turns.

Planeception is the best kind of plane

The fact this man hasn't played space engineers astounds me

@Real Civil Engineer , I've been watching some of "Mustard's" and "Dark Skies" youtube channels on old airplane designs made during ww1 - ww2 and you should def try recreating some of them: XB-70 Fastest Bomber of it's time (M) Flying Wings - The future of flying from back then (M) XC-120 Packplane - A powerful cargo aircraft with a detachable cargo compartment (DS)

definitely going to need to see boatception too. a small sub in a bigger sub thats also in a boat.

you should consider playing a game called "brick rigs" basically a lego building sandbox with a ton of mods. really fun

The second plane gives me Thunderbirds flashbacks

That small plane is so cool

Wonder how good Matt could build on SimplePlanes, just go crazy with it

RCE in trail makers: makes something that looks nothing like a plane, flys perfectly RCE in ksp: makes a realistic looking plane, can’t even get off the runway straight

Love the underwater muffing! Great editing!

I learned everything I know about aerodynamic engineering from Scott Manley. I recommend looking through his old videos to get a good handle on this.

i think if he got the rockets to separate on the second plane, then the two sides would split cleanly and the inner first plane could just pop out and not have to maneuver out of it. peace, love, and planes.

Pretty sure that it needs to fly at some point to be called a plane, so the box with wings falls a bit short. And you should have mounted plane #2's rockets on explody bolts as well, and I think that would have helped the mini-plane escape easier.

I think you needed a few more detachable blocks at the back of the middle plane, either splitting the thrusters into 2 sections or separating them from the fuselage, to make it break apart better.

you should get the high seas expansion, its very fun and adds alot of new pieces and things to mess with

Great video Matt. I think the blob fish plane would break apart better if the engines weren't holding the side pieces together.

Could add more destructible detachment points between the boosters in the back of the second plane [would cause complete separation] and maybe interior engines to the insides to force the hull pieces outward just like in KSP!

Day 51 of asking RCE to play scrap mechanic

It is always funny watching a civil engineer trying to make something that moves.

I like it when Matt decides to make a silly idea.

I appreciate the Kevin-like underwater talking effect.

I knew this would be interesting once he started building the tail of the first aircraft.

I’m sure someones already pointed it out. But instead of individually changing configurations of blocks. You can hold down the button to select it to select all of that block and change them all in one go :)

Your center of gravity is what has a major impact on stability. With a rear CG the front of the plane will want to rise and stall as well as making the plane very unstable. You want a central but slightly forward CG for stability. Too far forward though and you won't be able to pull up. Just remember rear CG unstable and hard to control but very maneuverable, Forward CG more stable but less maneuverable (definitely worth it).

im not sure if it still works, but you used to be able to make giant structures out of multiple seperate models, and use magnets and logic etc to interact with each module. was a funky way to get around the parts limit!

Hey matt, seems like your engines were keeping your second plane from splitting apart. The detachable blocked just detached from eachother but the shell was still held together

Hi love your videos they make my day every time I watch them Thank you

The first and second planes were pretty cool, very well done. Parts cap screwed you on the third plane, but you made it work. Great video, overall.

Plane 1: kinda cute little plane Plane 2: flying concrete shelter Plane 3: box.

The small plane is really good, but the big one.... lets say you channeled your inner architect for that one :p

Real aerospace engineer is about to throw a fit

It's endlessly amusing that your second plane is basically Thunderbird 2.

i love how the small plane is kinda controllable, the medium is decently controllable then the big one just isnt controllable.

just a quick tip, theres a toggleable "turn to scrap" option on the detachable blocks that makes any block attached to them (not including anythign connected to what youre in) destroy itself completely after detaching the planes were all awesome though. especially the last one that was definitely a plane.

that first plane needs to be a mount in an mmo lol. i loved how the tail moved in flight.

It's amazing that the smallest plane is actually by far the best and most plane-y

The top of the tailfin of the small plane was connected to the inside of the roof of the blobfish. Also, you should make a boat inside of a car inside of a plane! That or some combination of the three

I would like to request more of this, what a cool game

I think if the middle plane had those detachable pieces where the wings connect its break apart more so.. but I like the idea of it being a airplane hanger that happens to be able to fly aswell.

i love the trail maker videos matt

Mini plane? Top notch. Med plane? Alright. Pretty good. Big plane? That's just a box.

A plane in a "plane" in a ""plane"". Definetly something an Architect would come up with.

Beautiful video

Now I'm imagining a RX-78 Gundam with an ejectable Core Fighter...

Matt's brain FASCINATES me.

I love the under water sound effects

Honestly my favourite RU-vidr right now

I absolutely adore the editing style

I love seeing mirror mode being used!

This game feels like a creative mod of TerraTech

It didn't even detach because it needs the detachment block to be the only attachment point. The whole thing was alternatively attached to the tail, so it didn't matter at all, and nothing happened.

As a seasoned trailmakers player, all of RCE's trailmakers videos cause a little bit of me to die on the inside, yet still mange to be entertaning!

Hope you're having a fun vacation! Be safe while snowboarding!

i dare you to do the scenarios (that's if there are any in the game) with what you have created so far, not just in this but everything you did so far

If you had just the first two detachable blocks the whole thing would of turned to scrap. Obviously with it enabled. It scraps the entire object. Anywho love your videos.

That was so cool!

Love trailmakers content

I love the mimicked muffle from speaking under water

keep up the good work always love watching ur vids

This Engineer is a genius!

Great video RCE. Keep up the good content. Let's go Patty and Schmichael.

The reason your plans are so unstable is because the center of mass is so far back. the farther back it is the more maneuverable/unstable it is. Most planes are nose heavy

RCE unintentionally creating Thunderbird 2

The reason the second plane wouldn't fly right is because of how short it is. If you extend the length of the aircraft and added more space between the horizontal stabilizers and the main wings it will be more stable

You can rotate parts in Trailmakers way easier, by just holding down alt and then pressing WASD

We need this planeception in kerbel

How to drop the tiny plane better: remove the bottom blocks of the middle plane that catch the tiny plane. How to make the biggest """"plane"""" take off in a more stable way: move every thruster down to meet the wings.

matt plz make submarine that shoots a torpedo in trailmakers

I love the thumbnail art!