Ep. 192: Data Logs 101 - Getting the Most from Castle Link

Подписаться 5 тыс.

Просмотров 13 тыс.

50% 1

Do you have a Castle Data Logging ESC, but can't figure out how to get anything useful out of your Data Logs? Well, this is the video you've been waiting for.
This time, I walk through how to download Data Logs from your ESC and how to dive into your data to see how your car is REALLY performing.
Join the conversation at the RC Physics Sandbox: / 804281383082531
For more, visit rhouse21 at
RU-vid: / rhouse21rcphysics
Facebook: / rhouse21rcphysics
Instagram: / rhouse21
Ebay: www.ebay.com/usr/rhouse21

Опубликовано:

18 ноя 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@RCVHX22 7 лет назад

thank you very much for sharing

@RCPhysics 7 лет назад

My pleasure.

@PoweredByCastle 7 лет назад

RC Physics - THANKS for a great tutorial!

@RCPhysics 7 лет назад

No problem. Thanks for watching!

@joestricklandsr705 7 лет назад

Great info, thanks bro.

@RCPhysics 7 лет назад

Thanks!

@alexvelez378 4 года назад

Thanks for this lots of help

@RCPhysics 4 года назад

Thanks for watching!

@barharborbasher249 7 лет назад

hey great job ! I've been self taught.... Info like this is greatly appreciated from people like me👍 Thank-you for the great tutorial you're a assit to the community🍻

@RCPhysics 7 лет назад

Thank you!

@korbynjasper807 2 года назад

instablaster...

@heyhey-dc7il 7 лет назад

great video

@mikeinvegas1 4 года назад

My electric losi 3.0e goes 100mph. But now it wont go over 80mph. I use a 6s battery. I swith between 2 different ones. Go to 100 on both.. but now not past 80 on both.. can it be cap pack? Or u think esc?

@RCPhysics 4 года назад

Jut replied on a different thread.

@JimmyKay1976 3 года назад

I needed this! Just want to be sure I understand correctly though. In order for me to isolate the run I'm interested in, I'd want to look at and zoom in in the part of the graph with the highest peaks? Thanks!

@RCPhysics 3 года назад

Pretty much, but most people end up with a few "peaks" in their logs. You can look at other clues like the throttle input and check the timing to help you find the right data, though. For example, if it took you about 5 minutes after power-up to get lined up for your pass, you can skip to around the 300sec mark in the log to start looking for the data you care about. You'll figure it out in no time. Thanks for watching! 😃

@JimmyKay1976 3 года назад

@@RCPhysics So if I found the highest and lowest throttle inputs, would that be the run and what I zoom in on? I like the idea if using that reading as a guide.

@RCPhysics 3 года назад

@@JimmyKay1976 You should be able to spot when you lined up and started the run by looking at your throttle vs. rpm & power. You know you have the run because all 3 should have peaks.

@detroitrcwurks998 6 лет назад

Do I need to disconnect my rx wire before linking my castle link card to my computer? I'm waiting for my castle link to come in mail as we speak, mamba monster x sensored esc 1515!

@RCPhysics 6 лет назад

You connect to Castle Link through the channel 2 wire, so you have to unplug it from the Rx to gain access to it. You can leave the Channel 3 wire plugged in on all X-Series ESCs except the Mamba XLX, which needs Chan 2 & Chan 3 unplugged from the Rx to avoid hurting the ESC. You can leave the card plugged into the computer while plugging into and unplugging from the car, though.

@detroitrcwurks998 6 лет назад

rhouse21 - RC Physics my esc has a spare castle link wire for the castle link to eliminate the need to have to unplug the rx wire. At least that's what I've read. I just got it and haven't hooked it up yet but it's a spare wire plug same as the rx wires just this one don't plug into anything but the castle link?

@detroitrcwurks998 6 лет назад

Ok read the drivers ed guide... The 1 wire is the rx wire and the other wire I was referring to is the aux wire!!

@RCPhysics 6 лет назад

Yup! You got it now! So, you can leave the Aux wire plugged in on the MMX and you do not have to worry about unplugging the programming card from the computer as you plug into and unplug from your car. There's a LOT of capability in Castle Link. Enjoy!

@rex_s80 7 лет назад

how do you know if you esc has data logging?

@RCPhysics 7 лет назад

Castle Data logging ground ESC's are the Mamba XL2, Mamba XLX, Mamba Monster M, and Mamba X. They also have several data logging aircraft ESC's but I don't want to give you an incorrect list. You can check their website or just download Castle Link and check out the various ESCs in "Demo mode" to see if logging is offered.

@mikeinvegas1 3 года назад

Nice video. What cable do i need to hook up to esc to be able to do this?

@RCPhysics 3 года назад

You can use either the Castle Link USB programmer or the Castle field programming card, which has a USB link built into it. Links to both are below. You should have received a code for a free USB interface or a field programming card for $10 with your ESC. www.castlecreations.com/en/castle-link-v3-usb-programming-kit-011-0119-00 www.castlecreations.com/en/field-link-for-driving-010-0063-00

@mikeinvegas1 3 года назад

@@RCPhysics thank u i appreciate it

@DandSCreations 3 года назад

My power out never goes near 100. I have 8s 6000mah graphene 130/260c batteries pulling 6000 watts with a cap pack power out seems to only run 60%

@RCPhysics 3 года назад

Have you ever calibrated your throttle?

@DandSCreations 3 года назад

@@RCPhysics it was actually the punch! I thought punch only affected the first few milliseconds... No, 100% punch only gave 60% power anything less than 80% gives 100.. now to address voltage sag... 34 to 21 volts in one drag pass. Geared 28/46 with 3.91 diff and 4" wheels. 2200kv motor 6000mah 130/260c lipo, and ripple killer. 8,500 watts

@RCPhysics 3 года назад

@@DandSCreationsVoltage Sag is all about the current level and internal resistance of the cells. How much current did the logs read?

@DandSCreations 3 года назад

@@RCPhysics 340amps

@DandSCreations 3 года назад

I wish I could show you how aerodymically flawless my Hobao buggy build is.. a work of art. Complete fabricated diffuser multi element wing and canards (3D printed) and a lexan full body belly pan. Protoform Corvette body. I've been 106 which is pretty damned slow but I was only putting out 60% power in those logs and it was before all the aero mods.