Ep. 5. New Wheels And 33" Tires For The 1st Gen Sequoia 1stGenOffRoad.com

Подписаться 16 тыс.

Просмотров 129 тыс.

50% 1

ru-vid.com...
Featured Upgrades:
1. 17x8.5 Fuel Anza Wheels, Gun Metal, 6 on 5.5 or 5 on 139.7 with -6 offset: www.1stgenoffroad.com/store/c8...
2. 285/70/17 BFG KO2 Tires: www.kqzyfj.com/click-8817494-1...
Previous Upgrades:
1. Bilstein 5100 Adjustable Front Shocks: www.1stgenoffroad.com/store/p...
2. Bilstein 5100 Rear Shocks: amzn.to/2xzClAK
3. The Bilsteins were later pulled and replaced with Old Man Emu 60020L Rear Shocks: www.1stgenoffroad.com/store/p...
4. ARB 2862 Rear Springs: www.1stgenoffroad.com/store/p...
Tools Used
1. Impact Wrench: amzn.to/2sjiK2w
2. DeWalt Air Compressor: amzn.to/2J3jXkS
-----------------------------------------------------------------------------------------DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Limitation of Liability & Disclaimer
Under no circumstances shall “Josh” of “1stgenoffroad.com” be liable for any losses or damages whatsoever, whether in contract, tort or otherwise, from the use of, or reliance on, the information, or from the use of the internet generally. For purposes of this section, Josh and 1stgenoffroad.com or those associated, its divisions, subsidiaries, successors, parent companies, and their employees, partners, principals, agents and representatives, and any third-party providers or sources of information or data will not be held liable for any wrong doing the user does to his or her own property guided by these instructions which are meant to be a guide or a “how to” on fixing your own vehicle.
Josh and/or 1stgenoffroad.commakes no warranty, representation or guarantee as to the content, sequence, accuracy, timeliness or completeness of the information or that the information may be relied upon for any reason. Josh and/or 1stgenoffroad.com makes no warranty, representation or guaranty that the information will be uninterrupted or error free or that any defects can be corrected.

Опубликовано:

8 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 348

@harmonize209 6 лет назад

Looking nice I have a 02 with same set up as you except I'm running 16x8 285/75/16 M/T maxxis bighorn.

@1stgenoffroad 6 лет назад

Send some photos. I'll pout them on the Facebook page. 16" wheel with 33s is a good look. More tire, less rim the Maxis is a big cushy tire too!

@harmonize209 6 лет назад

Just saw you in sequoia-fourms.com. I'm also a member in there too. My member name is 2002SEQUOIA. Where can I send you some pic?

@1stgenoffroad 6 лет назад

Great! You can always email me. josh@1stgenoffroad.com And you can find me on the 1stgenoffroad Facebook page.

@1stgenoffroad 6 лет назад

I put it on the facebook page. You can see it here: facebook.com/1stgenoffroad/ Good job on this build. It's looking good!

@HotRed00 6 лет назад

harmonize209 are u running that size tire on stock height ???

@STinGa157 4 года назад

Thanks for the tutorial on wheels and offsets. As a non-mechanic who has plans of overland camping, this explained quite a bit.

@xXSiNiSteRXx1 3 года назад

Love this guys videos I learn something new every time I watch one. Thank you for opening a shop for us Sequoia lovers I'm more then happy to purchase my future shocks, tires, wheels etc. Just need to figure out what is best for my truck.

@MultiDreamer1979 5 лет назад

I just bought a 2001 Sequoia..only 123.000 miles and 1 owner it was a older gentleman that took real good care of her.im so glad to finally be driving the Sequoia!😀

@MultiDreamer1979 4 года назад

@Malik Martin thx man good luck to you too!

@davidc436 3 года назад

Timing belt engine. Mine was done at 150000 miles when I purchased it. Owner said belt was in great shape. I believe Toyota recommends replacing at 100000 miles. Necessary to change water pump, thermostat and radiator at this time. Rear lift gate latch/handle will break. The "D" for drive gear light bulb will go out. Back window will function will break. The vehicle will go 1 million miles. Best vehicle on the planet. I used strut spacers so I could clear 265 tires. Aloha!

@kevincharles1983 3 года назад

@@davidc436 I bypassed that rear handle. 02 100k. Back window stil works. The "D" light is out.lol. still need to check out the timing belt

@joelwilkins8695 5 лет назад

thanks for the technical information. Never heard anyone explain things like wheel offset or hub/lug-centric wheel.

@BreechBangClear 6 лет назад

Picked up an ‘01 last night, really glad I found your channel. Headed to FB now to add the page as well.. This vid alone pointed me in the right direction!

@1stgenoffroad 6 лет назад

Good deal. Keep us updated on your build.

@davidlownsdale4494 6 лет назад

I’m liking how your sequoia build is coming together so far. Can’t wait to see some trail testing on it. I stumbled across your videos trying to find some of sequoias off Road (I’m in the market for one). Got some good ideas now. Good work

@1stgenoffroad 6 лет назад

Thanks for the feedback. I've got a little off road footage but not much. Like to have a highlight reel soon! 😀

@ccrews0612 6 лет назад

Had a set on my 04 Sequoia. They are great tires. My only complaint was the wear life. I drive dirt roads everyday and found that the Goodyear Wrangler Silent Armor outlast the BFG. Both were 10 ply.

@1stgenoffroad 6 лет назад

Yeah, I have that one too. www.1stgenoffroad.com/store/p76/Goodyear_-_Wrangler_MT%2FR_with_Kevlar.html Wish I could choose them all!

@Seahamm2419 6 лет назад

Good morning Josh! Just ripped through your videos last night and finished up this morning. We have twin Sequoias (mine is an 03 though)! Same color, SR5, etc. Anyways, I picked mine up a few months ago and I love that thing! Your videos are fantastic and I'm really pumped to get this project rolling now! The only thing missing is the money 😂😂 As soon as I've got the cash I'm going to go crazy on your site. I wish I could express just how appreciative I am that you took the time to make these videos with such clear instructions and direction. I'm really looking forward to seeing what the future holds! I'm going to send you a photo of me playing in some mud. No mods except a bull bar but I figured you'd appreciate the twin

@1stgenoffroad 6 лет назад

Glad you liked the video series so far. Stay tuned, there's more to come. I'll look for your photos. Is it ok if I put it on he 1stgenoffroad Facebook page?

@Seahamm2419 6 лет назад

1stgenoffroad it's not anything special but you're more than welcome to! ☺️

@1stgenoffroad 6 лет назад

I love this photo! I put it up. facebook.com/1stgenoffroad/photos/a.486656581709926.1073741828.486508561724728/505467883162129/?type=3&theater

@Seahamm2419 6 лет назад

1stgenoffroad awesome!!

@11thronnin27 6 лет назад

Finally found a video that helps me with Great advice and ideas for my Sequoia!!! Thanks bro!!👍🏾

@1stgenoffroad 6 лет назад

Yeah, man. Glad it helps. Next one coming soon!

@Esteb858 6 лет назад

Thanks for doing these videos! I'm picking up a 2005 Sequoia and this helps a lot!

@1stgenoffroad 6 лет назад

Yeah, man! Glad it's helpful. Subscribe and you'll get every video I make.

@Esteb858 6 лет назад

I'm subscribed! Number 105 lol

@timothypalacios9304 4 года назад

Your truck looks great! Thank you for sharing all the details!

@henryschweizer7266 6 лет назад

On my Sequoia I put on some all terrain Bridgestone Duelers, I took off all my mudflaps, I like the look better. No running boards makes it look lifted as well with a great look.

@1stgenoffroad 6 лет назад

Nice! I like the no mud flap look too. You have a photo of your rig?

@henryschweizer7266 6 лет назад

1stgenoffroad None from the side, I’ll take a photo of it from the side in the future

@henryschweizer7266 6 лет назад

1stgenoffroad actually I do have a photo, anyway I could email it to you or something ?

@1stgenoffroad 6 лет назад

Yeah! Email it. Josh@1stgenoffroad.com

@masonfree7185 6 лет назад

Did you have to lift it for clearance?

@kurtnagahori9709 Год назад

Thank you so much for taking the time to make this video and share all this great info, super helpful! I am very interested in picking up a Sequoia and going with a similar 33” set up. If you ever have the time, would you mind taking a measurement from the ground to the roof of the car. I’m wondering if this will fit in our condo complex garage, or going to have to be parked outside. Thank you again!

@jonrachy 3 года назад

Did he say I don't see much snow in Texas but maybe one day? It's prophetic

@thomasbrogan9102 2 года назад

Ha!

@thepalmerfamily512 2 года назад

I like this video I'm tricking out my 2004 toyota sequoia with 416,000 miles just got my wheels and tires just waiting on the lift now

@williamwhitehead8362 4 года назад

Great video! I will be doing a 2 1/2 to 3 inch lift in the front with diff. 1" drop and I like your lift in the back with the the new springs and the second shocks it looks good. I will I want to go up just a little bit more then yours is. So she's at least level in the front with the back maybe a little less. But would like to keep mud flaps on. I have a 2002 SR5 with leather seats Burgundy and gray fender exits. Will check out the wheels with -6 rake on them. I like the copper tires better then BFs.

@parkerdriggers8540 6 лет назад

I have 33in nittos on my sequoia as well. Love your wheel choice too!

@1stgenoffroad 6 лет назад

👍🏿 yeah. You can't go wrong with Nittos!

@parkerdriggers8540 6 лет назад

Love your vids too boss

@1stgenoffroad 6 лет назад

Ha! Thanks!

@Jimpassarotri 6 лет назад

Nice job. I now understand offfset.

@MVRWC Год назад

Love the dog right at the start!

@1stgenoffroad Год назад

Unfortunately she's no longer with us. She was shelter rescue and the best dog I've ever owned.

@cayman9873 2 года назад

Those look great. Bought an 07 4wd sequoia today. Looks like i need some lift to start with. The rear tires are not great. But want to wait and get 33 inch tires.

@1stgenoffroad 2 года назад

Congratulations on the new rig. I still love to drive mine.

@cohesion5940 5 лет назад

I have a 06 tundra and it’s 2wd but I like the aggressive look I put a rough country leveling kit on it blocks and new shocks I want a good tire and rim combo and I don’t wanna have to trim I’ll take the mid flaps off and I wanna feel up that wheel well and complete the look of my truck I need help or advice on sizes

@ChrisBrown-vc7ty 6 лет назад

I've an '02 Sequoia with 249k still running like new, but we've moved to the top of a mountain, and the drive down and up is fairly rough dirt/gravel, and downright crazy in the wintertime. Would love to add a bit of a lift and bigger wheels, so I'll check out your channel and website.

@1stgenoffroad 6 лет назад

take a look at this kit: www.1stgenoffroad.com/store/p64/OLD_MAN_EMU_COMPLETE_SUSPENSION_KIT.html

@crankybuzzard6867 5 лет назад

i had Old Man Emu on my 2000 4Runner.... it was great!@@1stgenoffroad

@pablourrabazokingdombringe3874 6 лет назад

Hey Josh. What kind of MPG did you get before and after this video?

@dominic6851 5 лет назад

Hey Josh, great vid. Just had a quick question as I just picked up a 2002 Sequoia and Im looking to raise it a bit. I was checking out the Daystar 2.5" Body Lift Kit with strut and coil spacers and was wondering your take on it? Wanting to fit the same 33'' tires without breaking the bank. Thanks!

@jeimmyhernandez962 6 лет назад

Nice sequioya. Im putting on mine 17 trd pro and going to paint mine cement gray is the same color as a scion tc 2014

@elijahbrooks8589 6 лет назад

I always thought the hub centric issue was about wheel spacers. Some spacers have no hub centric ring and in my line of thought that's a big negative attribute.

@justingoncalves6788 6 лет назад

yeah on flat ground but other rubs spots might show up when turning and suspension is articulated.

@1stgenoffroad 6 лет назад

does great.

@GodBreathed77 8 месяцев назад

Dude the guy I bought my Sequoia from pretty much copied exactly what you did lol. He kept the rear end airbags and did the ride height on the bottom ring on the front suspension then put ) 315 (34.4 inch) KO2's with the Fuel Anza rims with the -6mm offset 17's. Rubbed on the upper control arm and frame on the inside and a bit on the fender wheel on the outside. Got some 255/80/17's on it now. They look so much dinkier, but no rub and it drives amazing now. Just wanted to let you know, you influenced some choices here.

@stevemustard1889 2 года назад

Wheels look sweet on there. I just started looking for a first gen Sequoia. Id like to copy your lift. It sits perfect

@1stgenoffroad 2 года назад

Thanks Steve. This is what I did: www.1stgenoffroad.com/store/p279/1stGenOffRoad.comRU-vidSeriesSequoiaSuspensionBuildKit.html

@NomadChad 4 года назад

What would you suggest for both street and off road? I literally know nothing about tires unless they are tires that go on 18 wheelers. I am about to purchase a very nice 1st gen sequoia. My plan is to haul a power washing trailer with 2 200 gallon water jugs and some other pressure washing equipment. I want to be able to get decent fuel mileage but still have the capability to go off road.

@lowandslow24 6 лет назад

Wouldn't a little more offset fix the rubbing? Go to like a -12 or so?

@QBIX23 5 лет назад

Hi Josh, on your second video, Ep.2 do you think by setting the shock higher will solve the 'rubbing' issue?

@carlosbautista1455 6 лет назад

Thanks for your videos man I have 2004 sequoia and I did the 4600's with spacers at front and new 2" coilspring on the rear and it looks sick!!! Just saving up to get bigger tires. I've thinking on installing a dual magnaflow exhaust. What do you think?

@1stgenoffroad 6 лет назад

Do it. I love a good set of pipes on that 4.7!

@lewisking5143 2 года назад

Thanks for informative video. I greatly appreciate your time and effort.

@1969MARKETING 3 года назад

how do you adjust the speedometer for the bigger wheels? also would these tires work with a 17x9 that has zero offset?

@josephambs942 5 лет назад

Question. Will the 285/75/17r fit in the spare tire spot under the rear end?

@tonyt0311 5 лет назад

No alignment needed??? I'm going go with toytec 3 inch lift, stock wheels with 295/70r 17 km3 or toyo mt, I'm certain I'll need a 1.5 inch wheel spacer for clearance/rubbing. I just really like the stock rims. 2004 limited, thanks for your videos man!!!! You are a blessing for us who are starting what I feel to be the next hot item! Size, power, looks comfort!! I loved my 80's series!! But I will die with this rig!!!!

@1stgenoffroad 5 лет назад

No. Alignment is needed. Don’t go with the Toytec kit. The rear shocks are too short and you’ll regret it. Ask Toytec how long the rear shocks are and then watch this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Z9btVVVU_QE.html

@alejandroayala668 Год назад

Question !!! what its the biggest size tire I can put in my sequoia without rubbing. current rims size 17 and no lift kit don't mind a little rub when full turn.

@gurseavkmalhi4734 6 лет назад

Excellent video , keep it up!

@ritchman8 4 года назад

Awesome job bro!

@brandongomez3870 4 года назад

I have an 06 sequoia limited, around how much would It cost me to throw on a 6 in lift with some wheels and tires

@ljosueojeda 3 года назад

Hey, I have a 02 Tundra. Do I have to upgrade upper control arms and struts if I want 16" rims with 33's? (I'm running 16" rims and 31's KO2, but wit stock struts and upper control arms).

@carlosmccoy9018 6 лет назад

Thank you.

@701overland 5 лет назад

have yet another question for you. Have you heard or know.of a way to install a switch to bypass VSC/traction control? When going through mud and or snow the traction control is shutting my power off casuing me.to get stuck for bo reason.

@1stgenoffroad 5 лет назад

Find the fuse and pull it. Or get a small evap leak like me. Check engine light comes in and turns the VSC off.

@greenflintriver 6 лет назад

Do you have any trouble with VSC lights coming on after lift around sharp corners? I have 05 Sequoia with Billstein 5100 and 33" Nito Grapplers and get beeping and VSC light around sharp curves over 30mph.

@1stgenoffroad 6 лет назад

Make sure the tire pressure isn’t too high. 38ish psi is good.

@xiongvue1060 4 года назад

Awesome video! Thank you! Now, Josh I have followed this video and put in Bilstein 5100 in all four corners. I am on the 3rd notch on the fronts with stock springs. Stock springs in the rear. Also put in the diff drop you recommended. But now the car squats in the rear just a tad? Would the Dobinson's or 60020L level the car out you think?

@1stgenoffroad 4 года назад

Glad you like the video. What spring do you have in the rear?

@xiongvue1060 4 года назад

@@1stgenoffroad I have the stock springs in the rear.

@1stgenoffroad744 4 года назад

Dobinsons rear spring here will make you level: www.1stgenoffroad.com/store/p208/DobinsonC59-345RearSpring.html

@hillboy582 6 лет назад

That's a perfect wheel combo

@1stgenoffroad 6 лет назад

Thanks. You live in central Texas. We should go wheeling sometime.

@hillboy582 6 лет назад

Yes sir I'm in the Killeen area and actually looking at a Sequoia used in temple, I have a new truck but just can't see beating the hell out of a brand new truck when I can get this one for 4500 bucks, if your in the area we definitely need to go wheeling. We are kinda limited here, unless we get area access pass for ft hood range roads lol

@1stgenoffroad 6 лет назад

Get me in to ft. hood. We can go wheeling and hog hunting.

@aymangadha1439 6 лет назад

1. Take off the step bars for more clearance. 2. Straight pipe. 3. Lights

@1stgenoffroad 6 лет назад

Patience my friend. New videos coming soon.

@tonyt0311 5 лет назад

I hear these things sound beastly straight piped! And quite neighbor friendly too.

@sqeekms6186 Год назад

I just made it down payment 15 grand for parts getting all the best crap getting my Sequoia gen 1 05 lifted I'm having a three and a half inch lift 35 inch tires getting new fenders that flare out getting a suspension. It's probably going to run me around 22000 to 23,000 I'm getting Jeep Summit 4 by 4 in Prescott Arizona to do it they are higher-priced and everyone else but the quality is unbeatable you definitely get what you pay for these guys... they will definitely be doing some cutting on it especially in the back because they can't find a rear fender that will fit so they will have to cut it out because 35 inch tires won't work without cutting.

@sameersmerchant 6 лет назад

Do the bigger tires ride better? Any decrease in MPG?

@ttvills 4 года назад

Can you set 265/60/18inch stock GX Lexus on a 02 tundra? The tundra set on 16”s right now

@timelessvickdamone 2 года назад

Those rims are dope!!!!

@1stgenoffroad 2 года назад

Thanks bud!

@390WagonMaster Месяц назад

Beautiful Goldie.

@1stgenoffroad 29 дней назад

She was a good one.

@michaelking4578 6 лет назад

Looks great!

@1stgenoffroad 6 лет назад

Thanks, man! Don't forget to subscribe.

@michaelbrooks9450 Год назад

So I have a question for you. I just installed a 2.5” lift on my 01 sequoia and replaced the lower control arm / ball joints etc. I took it to have the alignment done and they said I needed upper control arms in order to correct the geometry and do the alignment correctly. Do I need a set of adjustable control arms or just one for the lift I have? And why control arms would you recommend? Thanks

@1stgenoffroad Год назад

Hi Michael. The SPC or Freedom Off Road UCAs will work for your application. I like SPC the best. Link: www.1stgenoffroad.com/store/p146/SPCUCAs/Tundra/Sequoia.html

@joseroldan3363 4 года назад

Looks great 👍

@brandonwagner2661 6 лет назад

Do you offer a military discount by any chance?

@Tra1710 3 года назад

Nice video! Why did you switch out the rear shocks?

@OverlandEats 4 года назад

What sliders can be made to fit these rigs?

@sandovalpaul 6 лет назад

Hey Josh, I have an 06 SEQOUIA limited 4x4 with captain chairs. What do you recommend for daily and some off roading tire and a schocks reccommedation

@1stgenoffroad 6 лет назад

take a look at this kit: www.1stgenoffroad.com/store/p64/OLD_MAN_EMU_COMPLETE_SUSPENSION_KIT.html And it's hard to go wrong with BFG KO2s.

@crankybuzzard6867 5 лет назад

Thinking about the Goodyear Wrangler Silent Armor.....@@1stgenoffroad

@Tra1710 2 года назад

Josh is the frame setup the same for an '06 with the air ride...or do I need some type of air ride conversion/delete kit with specific insulators and stuff? I want to switch over from the air ride.

@1stgenoffroad 2 года назад

Frame is the same for air ride. The airbag to spring conversion kit is here: www.1stgenoffroad.com/store/p1059/AirbagToCoilConversionKit2005-2007Sequoia.html

@sludged08 2 года назад

Great content man! Do you guys sell kits to delete rear air bags to traditional coils? Just picked up an 06

@1stgenoffroad 2 года назад

Here you go: www.1stgenoffroad.com/store/p1059/AirbagToCoilConversionKit2005-2007Sequoia.html

@derickvick4810 4 года назад

What do you do about wheel speed sensors

@samsonite813ify 3 года назад

I am running 295s on my 05 tundra with -16 offset and I am still rubbing on fenders with the suspension fully compressed. Do I need stiffer springs or a bigger lift? Any thoughts are appreciated

@1stgenoffroad 3 года назад

Either bigger lift or figure out where it's rubbing and remove that part (i.e. pinch weld).

@cristianaquino4431 2 года назад

Hey Josh, I'm looking to run -38 offset SCS wheels on my 1st gen Sequioa. Do you think that's too much negative offset?

@1stgenoffroad 2 года назад

I don't know if it's too much. It will stick out about over an inch more that mine. It will look real aggressive.

@Donkarnage223 7 месяцев назад

Good morning all and Merry Christmas, I have the ARB 2in lift front and rear with JBA UCA and zero offset wheels. Do you think the 285/75R16 Tire will fit? I am looking at the General Grabber which are at 32.83''. Thank you for your help and thanks for the lift kit I bought from you! It all installed very nicely and feel great!

@1stgenoffroad 7 месяцев назад

Yeah, it will fit. But with 0 offset wheels, you'll still get a little rubbing between the inside of the tire and frame when you turn.

@Donkarnage223 7 месяцев назад

Do you think the rubbing would be from the pinch weld? I can cut and bend over that weld on either side if that is where it would rub.@@1stgenoffroad

@Tra1710 3 года назад

Hey, I'm curious as to why you switched rear shocks. I have 2006 Sequoia RWD. Are the shocks different from a 4WD?

@1stgenoffroad 3 года назад

I switched to a longer shock to accommodate the taller spring.

@MrMharley 2 года назад

That looks great 🇺🇸👍🏻

@Tra1710 2 года назад

Also can you confirm the correct model number for the Old Man EMU front springs for my '06 2wd? I want to replace my factory front springs as well. Thanks.

@1stgenoffroad 2 года назад

email me the details of how much lift you're looking for. info@1stgenoffroad.com

@mimpcinco135 3 года назад

Has any one put a -12 offset wheel, I saw 1st gen tundra that was lifted with bilstein's 6112 with - 12 offset on, Rotors 88 channel.

@anthonyc2c2 6 лет назад

I like the 285's I have the ranch quick lift with one inch spacers on stock wheels. Does anyone have any input if these will fit?

@1stgenoffroad 6 лет назад

This tire wheel combo would fit just fine.

@amtrobia 6 лет назад

Nice choice!

@1stgenoffroad 6 лет назад

Thanks, man! Wheels and tires really do make a huge difference. My wife actually likes to ride in the truck now. 😉

@DiscoMan 6 лет назад

I need to get KO2s for my first gen

@1stgenoffroad 6 лет назад

Can't go wrong...

@atomicorang 3 года назад

I'm giving you 2 thumbs up .. not just one. 😎 Truck

@greenflintriver 6 лет назад

By the way your truck looks Great!

@1stgenoffroad 6 лет назад

Thanks man!

@senderoverland 3 года назад

Could anyone tell me if i will be able to fit these with just the inch and a half front lift?

@bobbyglander4838 4 года назад

Can you fit 33s on a straight stock 02 sequoia????

@dondee_33 6 лет назад

Josh, Thanks for the video! I have a 2002 SR5 w/ 140K miles and the ride is harsher now compared to when I first got it more than 10 yrs ago. Do think by changing the struts/shocks and changing all the bushings w/ polyurethane will soften thr ride?? Thanks for your help.

@1stgenoffroad 6 лет назад

Glad you like the videos. Yeah, I think it would make the ride better. Probably a lot better. Are you looking to keep the same height or give it a lift?

@dondee_33 6 лет назад

Josh, I would like to keep the same height or else it wont fit in my garage. Do u have any suggestions on what kind of struts/shocks to get? KYB? Bilteins? Rancho? Should I replace all 4 at once? I'm running on 265/70R17 right now w/ mostly street driving. Appreciate the help.

@1stgenoffroad 6 лет назад

If you're not going to lift the truck, I would go with these. Bilstein's. Adjustables up front set to the 1st notch/lowest notch. These shocks are good for. 0-2" lift. That way if you ever did want to put a lift on it, you could. Today is the last day to get 10% off with promo code 1stgen at checkout. Shipping is always free. www.1stgenoffroad.com/store/p21/Bilstein_B8_5100_Series_Ride_Height_Adjustable_FRONT_Shock.html www.1stgenoffroad.com/store/p32/Bilstein_5100_Series_REAR_Shock.html

@Prototheria 5 лет назад

Poly won't soften the ride. It'll make it harsher because it doesn't deflect and deform as much as rubber does, so more vibrations and bumps from the road will be transmitted through your frame. They also won't last as long as the rubber bushings, either. Keep the bushings OEM if they're worn. However, at 140k, I doubt they need to be replaced.

@aisaketukuafu9299 4 года назад

You think 285/75r17 fits?

@h22a353644 5 лет назад

I have an 01 sequoia and I put the bilstein 5100 all around with the ARB 2885 and 2865 and I was wondering if the front factory axles will hold? Or should I look into getting different front axles?

@1stgenoffroad 5 лет назад

I think they’ll do okay. When the boots start to sling grease, switch to high angle CV boots.

@h22a353644 5 лет назад

@@1stgenoffroad thanks. I'll keep that in mind.

@michaelhathcock7941 Год назад

Thank you

@samtaclawz1 6 лет назад

just subed! I have an '03 sequoia that Im planning on building up and I'm hoping this series can give me some reference

@1stgenoffroad 6 лет назад

Great! Next video is coming my soon. Send photos of your rig once it's built up, I'll put it on the 1stgenoffroad.com.

@mikeycole4692 Год назад

Off topic but do you think 33s are too much for the 3.4l tundra to handle? Trying to decide on a wheel size for my overland rig

@1stgenoffroad Год назад

Nope. Have that size tire on my 3.4 4Runner.

@joepa24josephpallo39 4 года назад

Thank. You. No seriously, thank you.

@spasm027 7 месяцев назад

Do you also test clearance at full lock under suspension compression???

@1stgenoffroad 7 месяцев назад

It did rub at full compression and steering wheel lock. Now I'm at just under 2" of lift. SPC UCAs to maximize caster. Same size tire on a 17"x9" wheel with a -12 offset. No rubbing anywhere, ever.

@leekeomorakoth1672 4 года назад

I bought some factory 4runner limited 20"s what tire size would you recommend for 1st gen sequioa no lift ?

@aus71383 4 года назад

Maybe look up "First Gen Tundras" on facebook and ask there.

@kyjelly5524 5 лет назад

Can you sleep in the back? Does it lay completely flat?

@conservator01 3 года назад

Is there ANY benefit, off road, to having 20" wheels on this year/model vehicle?

@larlarbooth 3 года назад

because the lack of center diff or why? That was my thought. In 4Lo 1st gear I guess there's a benefit, if that's the only center diff lock for 01 02's.

@stoenyce 6 лет назад

Thanx for making this

@1stgenoffroad 6 лет назад

Yeah, man. More coming soon. Subscribe and you'll get every video I make.

@kiamaz254 6 лет назад

Looking nice!!!

@1stgenoffroad 6 лет назад

Hanks! More upgrades coming soon.

@christopherlehr4872 4 года назад

Did you use ET lugnuts?

@FAIRL8DYZ32 5 лет назад

Will arb rear springs give the 2" lift with oem rear struts?

@1stgenoffroad 5 лет назад

I would't do that,. I would also add the ARB 60020L shocks here: www.1stgenoffroad.com/store/p196/OME60020LRearShock.html#/

@jeansegura9661 4 года назад

How much would a step up like this cost?

@hangsanity 3 года назад

hey josh, just purchased your 3" lift kit w/freedom off-road, my wheels are 16x7 w/+13mm offset, is the offset too high or you think it'll clear on 285 75 16?

@1stgenoffroad 3 года назад

Yes, it will rub with full left or right turning. My brother, @t, runs those wheels and they rub. I show you where at min. 27:30 in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nzmd5-fkuSQ.html

@1stgenoffroad 3 года назад

If you're sensitive to rubbing, I would add a 1.25" wheel spacer. Go with Spidertrax. Made in the UCA, hub centric. Here's the link: www.1stgenoffroad.com/store/p842/SpidertraxHubcentricWheelSpacers.html

@liquidpatrol2996 2 года назад

If I want to have 17x8 pro comp rock crawler wheels with -6 off set, 4.25 back space. Plus 1.25 inch wheel spacers and 285’s BFG KO2 AT. Do u know if it fits fine after I removed the mud flaps?

@1stgenoffroad 2 года назад

with a 2" lift, yes.

@liquidpatrol2996 2 года назад

@@1stgenoffroad THANKS!!! DO I ALSO NEED TO UPGRADE UCA AND DIFF DROP FOR JUST 2 INCH LIFT?

@1stgenoffroad 2 года назад

@@liquidpatrol2996 Optional.

@liquidpatrol2996 2 года назад

@@1stgenoffroad APPRICIATED!

@oreoskid90 4 года назад

I’m trying to do the same but with my stock rims, so you did raise it? Or left it alone?

@1stgenoffroad 4 года назад

Yeah. 2” lift. Can get everything at 1stgeniffroad.com

@caseycronkright9808 3 года назад

Why did you take the 5100’s off and switch to OME? I just ordered the 5100’s yesterday and now I need to know if i made a mistake.

@1stgenoffroad 3 года назад

They were too short. Take a look: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Z9btVVVU_QE.html

@derricksanchez9891 6 лет назад

How much did all of this cost for everything rims diff drop and all minus the tires

@1stgenoffroad 6 лет назад

take a look at this kit. www.1stgenoffroad.com/store/p64/OLD_MAN_EMU_COMPLETE_SUSPENSION_KIT.html

@devinelfers667 5 лет назад

Google BFG Ko2 Dry Rot. You'll find all kinds of negative things about them. They only last about 2 years before they dry rot. If you go through tires faster than that then you'll be fine. I had KO2s on my 1st gen Tundra and replaced them when they had 60% tread left because two of them wouldn't hold air from being dry Rotted so bad. I replaced them with Terra Grapplers which were meh. So far the best OR tire I've owned is Cooper Discoverer AT/3

@1stgenoffroad 5 лет назад

😂 year and a half in, so far so good. Maybe they’ll self destruct in T minus 6 months.