No video :(

Ep. 7. Tundra/Sequoia Brute Force Fab Bumper Install How To Video

Подписаться 17 тыс.

Просмотров 115 тыс.

50% 1

ru-vid.com...
1stGenOffRoad.com Shows You How To Install A New Brute Force Fab Bumper On a 2004 Toyota Sequoia. The Same Process Is Applicable For The 1st Gen Tundra.
Bumpers Can Be Purchased Through 1stGenOffRoad.com.
1. Tundra Bumper: www.1stgenoffroad.com/store/c...
2. Sequoia Bumper: www.1stgenoffroad.com/store/c...
Previous Upgrades:
1. Bilstein 5100 Front Shocks: www.1stgenoffroad.com/store/p...
2. ARB Old Man Emu (OME) 2862 Rear Springs: www.1stgenoffroad.com/store/p...
3. Old Man Emu (OME) 60020L Rear Shocks: www.1stgenoffroad.com/store/p...
4. Fuel Anza Gun Metal Wheel, 17x8.5, -6 offset: www.1stgenoffroad.com/store/p...
5. BFG KO2 Tires 285/70/17: www.anrdoezrs.net/click-881749...
Amazon Links
1. Self Etching Primer: amzn.to/2LHlMWh
2. Flat Black Spray Paint: amzn.to/2xzkauC
3. Pincers / Nail Puller: amzn.to/2srGu3S
4. Sheers: amzn.to/2LJaZet
5. Naval Jelly Rust Remover: amzn.to/2sthObb
6. Wire Brush: amzn.to/2IYKjbQ
8. Sand Paper: amzn.to/2LN95t5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Limitation of Liability & Disclaimer
Under no circumstances shall “Josh” of “1stgenoffroad.com” be liable for any losses or damages whatsoever, whether in contract, tort or otherwise, from the use of, or reliance on, the information, or from the use of the internet generally. For purposes of this section, Josh and 1stgenoffroad.com or those associated, its divisions, subsidiaries, successors, parent companies, and their employees, partners, principals, agents and representatives, and any third-party providers or sources of information or data will not be held liable for any wrong doing the user does to his or her own property guided by these instructions which are meant to be a guide or a “how to” on fixing your own vehicle.
Josh and/or 1stgenoffroad.commakes no warranty, representation or guarantee as to the content, sequence, accuracy, timeliness or completeness of the information or that the information may be relied upon for any reason. Josh and/or 1stgenoffroad.com makes no warranty, representation or guaranty that the information will be uninterrupted or error free or that any defects can be corrected.

Опубликовано:

24 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 274

@trailrunnah8886 5 лет назад

That looks terrific! Definitely gives it a more badass look. I found your channel while researching 1st gen Sequoias, and the more I learn about them, the more I like them! Hoping to find one soon.

@wolfpackt99 6 лет назад

2003 Sequoia Limited here. Just found all your videos and channel and watched them all. Thanks for the informative videos. Try to remember not to film vertical video on the cellphone. :) :)

@1stgenoffroad 6 лет назад

Yeah, Videos are slowly getting better. Will have a mic for the next one. 😀

@dciple4christ247 6 лет назад

Just bought a 07 Sequoia about a week ago .........BEST DECISION EVER!!!!! Thinking about front and rear bumpers

@04adventures Год назад

I have a '04 tundra sr5 and i'm putting on a similar bumper and this video has been a huge help to lay out what to do step by step, thanks tons!

@patriotsleepercell4060 5 лет назад

Love the videos, Just picked up my 05 tundra double cab and i love it, in the process of locating a nice Sequoia too for this project as you did! Never thought about the Sequoia how did i miss it! It is dirt cheap but just as good as the other 4x4's

@robsnizzle7 4 года назад

The 05 Sequoia rear discs can be converted to the tundra and REPLACE the inadequate rear DRUM BRAKES. I have the 06 DC TUNDRA AND GOING TO BE DOING THE SWAP HERE SOON.

@hoslogistics 6 лет назад

It's looking awesome! Wish there were some 2nd Gen Sequoia videos out there. I have a 2016 version and haven't even been able to fine rock sliders for it. I know they're out there, just very limited. 1st Gen has all the luck when it comes to parts.

@mobflip 6 лет назад

keep it up man, these trucks deserve way more love than they get

@1stgenoffroad 6 лет назад

Amen!

@robsnizzle7 4 года назад

I heard that I have the 06 DC 4X4 and love that truck.

@offtime915 4 года назад

Absolutely agree with you brother

@bobbyglander1309 4 года назад

I have a question if i may Who hates these suv's ? I just need to clear things up

@mobflip 4 года назад

@@bobbyglander1309 I don't think anyone hates them... its just no one builds them or makes parts for them

@panamerican0 6 лет назад

Ended up watching all the videos, not a lot of over landing videos on Sequoias!

@Joshua-sx9zk 3 года назад

That sequoia is actually pretty badass

@mkomko2589 3 года назад

That bumper looks dope been wanting one(current plastic one is being held on by duct tape).

@dietsoap3539 5 лет назад

You're like TimmyTheToolman but for Sequoias, I enjoy this.

@golfmike304 5 лет назад

Nice video and bumper. Love this channel for all that we can now do with our first gen Sequoias. Love my Sequoia and can't wait to get some mods on it.

@1stgenoffroad655 5 лет назад

Awesome! I love them too. Let me know if I can help.

@jamessmith8695 3 года назад

Awesome! I have been slowly restoring my 2003 SR5 now with 250k miles and have been looking for good bumper upgrades...not a lot out there. This looks like a great solution.

@scottymac5174 4 месяца назад

About the only true aftermarket bolt on bumper for First Gen Tundras/Toyotas. There are bumper kits available. But you need a fabricator/welder to put them together.

@Nadimhomesatsandymesser 4 года назад

Great video, very informative and specific. So stoked Gonna do this to my tundra . Thanks

@sandovalpaul 6 лет назад

Beast!!!!...keep the video's coming Josh!!!

@scottymac5174 4 месяца назад

One thing... I had the Bilstein 5100 front lifting struts with the stock OEM springs. After 3000 miles, with that heavier front bumper/winch. They were toast. I upgraded to the Bilstein 6112's. A much heavier duty shock, with a stiffer spring. Same deal as the 5100's. Except up to 3 1/2" of lift. I also put on a set of Camburg high lift upper control arms. Now running 33"s.

@1stgenoffroad 3 месяца назад

Currently sitting on Icons with a 700 pound spring. SPC upper control arms. GX big brakes. No sway bars. 17"x9" wheel with -12 offset. does fantastic.

@maxospreys2964 5 лет назад

Good job man, I will do mine the same. Two people with thumbs down couldn't lift the bumper.

@02to06TUNDRAFAN 6 лет назад

Props to you for the great step by step video on the install man! Truck looks great. Idk that this style bumper necessarily matches the route I've gone with my 04 DC but if I was to ever hit a deer or something I think I'd have to pick one of these up. (My bank account and I are knocking on wood so this doesn't happen though lol)

@1stgenoffroad 6 лет назад

Hey, I feel you, bro. Thanks for the props!

@Forestmcmac 3 года назад

That looks awesome! I wish the bumper for the Tundra looked the same!

@chrism.6214 4 года назад

Paint the head of the last bolts you installed it stands out when it's visible. Great video!

@danshim2644 6 лет назад

Very nice. I just bought an 03 sr5 tundra thanks for the install tips!

@1stgenoffroad 6 лет назад

Yes sir. Let me know if you need anything!

@scottymac5174 4 месяца назад

Did an add a leaf kit in the back. Very cheap and simple. The truck sits level, front to back. 33" BFG K02's on Method 16" Beadgrip wheels. I could have gone 17", but 16" with more tire will work better offroad.

@devinelfers667 5 лет назад

Your videos make me miss my 04 Tunrdra :(

@1stgenoffroad 5 лет назад

Lol. What are you driving now?

@lolYoruichifan 5 лет назад

looks really nice, I got a 02 jade green limited I bought from my parents that I've been slowly working on. I'm mainly looking set it up for a street/highway but I also want it to be good enough for trips to the mountains.

@1stgenoffroad 5 лет назад

Awesome! Take a look at the customer rigs section of the website. Find one you like and click on the picture. It will show you how they built theres. www.1stgenoffroad.com/rigpics.html#/

@robbyota5598 5 лет назад

Nice looks good... now I need one, didn't even know I needed one until now.

@1stgenoffroad 5 лет назад

Glad I could help. LOL!

@DirtDauberGarage 4 года назад

I love it! Thanks for making this vid!!!

@Alientraveler003 6 лет назад

Thanks for the vid . True work 👍

@WellWisdom. 4 года назад

Nice looking bumper. Thanks for sharing.

@jdmrider 5 лет назад

Billy makes sick bumpers!

@1stgenoffroad 5 лет назад

Yes he does! www.1stgenoffroad.com/store/p83/2000-2006_Tundra_Off_Road_Bumper_.html

@brickcity1422 5 лет назад

Great vid Brother. Keep them coming Please.

@9thGenerationCajun 6 лет назад

Looks great! My advice, make sure your airbox pickup tube isn't exposed now since trimming the fender liner.. Might need to join club snorkel now lol.

@1stgenoffroad 6 лет назад

Now that would make a good video!

@joshmccormick7534 5 лет назад

It did make a good video too.

@harmonize209 6 лет назад

Looking great that flex gonna help alot on the trails.

@1stgenoffroad 6 лет назад

Yes sir. Sequoia Summit 2018?

@arod4084 5 лет назад

Great Job! Love the Truck.I came across your build and now I'm hooked. I have a quick question. The recovery points are they one piece and part of the winch plate? Meaning is there a cut out on the bumper and come through the back of the bumper or are they welded at the front. My concern is strength recovery points should attach directly to the frame for strength and safety.

@TheOriginalFunnyguy 5 лет назад

I just bought a 05 Sequoia yesterday, wish this bumper would work for mine.

@kiletaylor94 4 года назад

This makes me want to put that bumper on my 2001 Sequoia

@kajukembo 5 лет назад

Thanks for the videos. Current 97 4runner owner looking to upgrade 4th gen 4runner or 1/2 gen Sequoia. Lately prices seem to be going up for 4th gens especially with the V8. I could get a lower mileage Sequoia and have more room with luxury. Tough decision because I'm coming from owning my 4runner for 6 years and now 245k in miles. Toyotas can't be beat in reliability.

@nicholasclinesmith1490 4 года назад

cummins... minus the dodge!

@Robert8455 2 года назад

Very nice bumper

@julianmartin4715 5 лет назад

Thanks for making these videos! I tried looking for the bumper and the rock sliders on your site but I couldn’t find them (for an 05 Sequoia). It just shows the rear bumper. Any idea why? Thanks!

@luizbut5579 3 года назад

Thats a beutifull video man , thanks fot you r work

@marcedwards6737 6 лет назад

Nice job! I have been in the market for one or a tundra 1st gens

@1stgenoffroad 6 лет назад

They are great trucks. Take it from me and many others, you will not be disappointed.

@elijahbrooks8589 6 лет назад

That’s a clean ‘Yota

@Subwoofer101 6 лет назад

Can these be ordered to include Blue Ox tow bar attachments? They have bolt on options, like part # BX88266, would something like that fit? Looking to flat tow one of these, and a base plate is about $500. If I can get a bumper that allows me to tow the Sequoia, I'm pretty happy. Little safer too. Really like the videos, good stuff! Still looking for a good Sequoia. Should be a week or two, and I can't wait!

@austintynefield6158 3 года назад

I have an ‘05 Sequoia Limited other than getting the bumper what are some must have upgrades?

@jamesmumpower5070 5 месяцев назад

Liked and subbed , bumper looks great went to website to see about ordering one for my 01 sequoia but says it's currently out of stock gonna keep an eye out and hope to snag one

@1stgenoffroad 5 месяцев назад

thanks for the sub. Take a look at bruteforcefab.com. Bill should be able to get you squared away.

@masonbaugher1111 3 года назад

I’ve been looking for something similar for my 06 limited edition V8 Tundra but this is the closest thing I’ve found any suggestions on bumpers for if this would work?

@thatonechopeguy 4 года назад

Restock the bumpers soon! I'm about to buy a 03 black sequoia! I live north of Austin

@monolithknives931 2 года назад

I have this bumper, itr is awesome!!!!

@Likethetacosauce 5 лет назад

I assume this bumper will work on an 03 tundra, just wanted to how much they are. The website says out of stock unfortunately.

@NathansPorscheWorkshop 6 лет назад

Hey buddy just found your channel, been doing some videos on my lifted sequoia, I ended up removing the front sway bar and it rides alot smoother, might do the rear after seeing your other video

@1stgenoffroad 6 лет назад

Yeah, my front sway bar and links are going. I kept one link in the back. I think I like it!

@NathansPorscheWorkshop 6 лет назад

Doing wheel spacers in todays video, after solving the wheel stud issue that toyota gave us all lol

@JohnnyBravoAfterPic 6 лет назад

I've had 2 of these 1st gen sequoias. They r outstanding vehicles. Never thought there was much of an aftermarket for them. You r inspiring. Keep up the good work. Btw....have you thought of increasing their GVWR via some kind of certification for towing now that you've added more weight? And will you be doing any power mods?

@1stgenoffroad 6 лет назад

Hey Brian, glad you like the video series. I have several videos in the work. Maybe one day we'll do some power mods.

@christianwallace7422 6 лет назад

wow i live in texas also been working on my sequoia build for the last year its lifted and on 31" tires been looking for a bumper since day one great video maybe we can hit some trails in the future! good videos!

@1stgenoffroad 6 лет назад

I’d love to do a local Sequoia meetup. What part of Texas?

@christianwallace7422 6 лет назад

1stgenoffroad Dallas/Fort Worth

@1stgenoffroad 6 лет назад

I live i Austin. We should meet up at Toyota Jambo or Hidden Falls or something.

@christianwallace7422 6 лет назад

@@1stgenoffroad definately!! I'm available whenever

@jesalii0611 4 года назад

Awesome. I have a 01 Sequoia and want to put the same bumper on. Is it the same for all 01-07?

@halseyknox Год назад

Are these bumpers like the one showed in the video still available....mine is a 06 SR5 without fender flares.....thanks

@Byrd12Mega 3 года назад

You paint so fast!

@antoniorodriguez5006 3 года назад

would that bumper fit on a 06 toyota tundra? the one they sell for the tundra is way big and don't like it.

@MickLAMF 3 года назад

Nice man! I might of missed it but how much does that bumper weigh as is?

@kylemichael5568 2 года назад

Are these bumpers ever coming back in stock

@christianguajardo6448 5 лет назад

What type of sliders are those?!🤘🏾

@isaacspoon 5 лет назад

do you plan on making a rear bumper video?

@juliopardo9333 3 года назад

What are the rock sliders you used?

@HistoricalDiggers 5 лет назад

I need one of them

@DaDavidVids 5 лет назад

Just discovered you and enjoyed the video. I'm simply worried someone could steal the bumper.

@leonardovazquez7483 3 года назад

Awesome! Love those rock sliders are they on the website?

@travishall2495 5 лет назад

I've had my '03 limited Seqouia for almost a year now. No mods yet but I am seriously inspired by what you're doing here and cant wait to start upgrading. What would you recommend doing first?

@1stgenoffroad 5 лет назад

Awesome! Glad you like the build. I'd do the lift first. But think about how you want it to look in the end. Adding bumpers front and back? A winch? That will determine what springs you may want to consider. Most of the kits on the website are for rigs with no added weight (bumpers, winch, rooftop tent). But we can easily trade one spring for another if you're thinking those things. Take a look here:www.1stgenoffroad.com/store/c17/2001-2007ToyotaSequoiaSuspension#/

@edmundovg 4 года назад

have bump stop rear & front??

@bri13wvu1 2 года назад

5:20, are you sure those aren't the transmission oil cooler hoses and not power steering? At least on the 4th gen 4runner, they look exactly like that and run right under radiator. Nice looking bumper 🤘

@stuartcurtis2219 4 года назад

On the website this bumper is only under the sequoia category, will it work on first gen tundras?

@pauledwardmendiola5680 4 года назад

Where can I get that bumper? The link here says it’s sold out. Anyone else have an idea where I can get them? Thanks in advance.

@christopherbodea3916 6 лет назад

Will this bumper fit on a 07? I saw on your website it says 01-04. I know they did a minor refresh to the Sequoia in 05 but do you think it changes the way the bumper had to mount? Awesome videos by the way! They are a great help! I’m about to start a new project rig, but I want to make sure the year I pick has all the options available. I’m looking into a 07 Limited without the active air suspension.

@1stgenoffroad 6 лет назад

Here’s the link to he 05-07 sequoia bumpers: www.1stgenoffroad.com/store/p91/2005-2007_Sequoia_Brute_Force_Fab_Front_Bumper.html

@bpz89 3 года назад

I'm looking for a custom bumper for my 2020 Sequoia TRD Pro. Any suggestions? I can't seem to find anything that will fit.

@ericveater2088 4 года назад

How much was it with the options that you ordered?

@scottymac5174 4 месяца назад

Also little stuff, like front bump stops.

@quickcutslauncareyahoocom 6 лет назад

Looks good.

@1stgenoffroad 6 лет назад

Thanks, buddy!

@jackwille6417 4 года назад

I have an 07 sr5 sequoia I just wish that bumper would fit mine

@devinsibiski2910 5 лет назад

you don't possibly know the threads of the bolts for the body and skid plate do you? my bumper didn't come with hardware for that.

@kismetjerome 3 года назад

the 2 bolts you used at 12:30, the 2 on the right that threaded in, do you know what size bolt you used?? I can't seem to find out.

@chengyang1273 6 лет назад

I was wondering when you put in that diff spacer did your lower control arm and lower ball joint had more stress or less

@1stgenoffroad 6 лет назад

Lowered the front of the lower control arm. reduced the angle of the axle and LBJ.

@Coryrsmith23 2 года назад

What color did you use for your bumper

@Dieselnm101 3 года назад

like the Rudy’s BBQ box!! Awesome restaurant!! You located in NM?

@1stgenoffroad 3 года назад

Austin TX 👍

@latipica1 6 лет назад

Hi nice video your sequoia look awesome. One cuestion what size are yours tires thank you

@1stgenoffroad 6 лет назад

Thanks bud. I run 286/70/17 BFG KO2 ATs on Fuel Anza wheels with a -6 offset. My video for that one is here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CtR6HpLV3OA.html

@martinmaguirre4216 6 лет назад

Hi nice videos i like w you recoment i have accidente w my bumper is junke i have sequioa 2003

@dmagz7023 3 года назад

Great video any recommendations for a rack and pinion for my 2006 Toyota Tundra 4wheel drive? Need to get mine replace thanks 😎

@1stgenoffroad 3 года назад

Two good options. The NAPA rack has a lifetime warranty, so that's good. The other option is the OE Toyota. Thanks!

@basmo6803 3 года назад

What did you do about the splash guard? Don't you leave the air intake really exposed cutting it that far back?

@1stgenoffroad 3 года назад

This: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-46sHVJhRUms.html

@EverymanGear 5 лет назад

Hey. Love your videos. I think I’ve watched all of them. Sorry if someone has asked or if I missed you mentioning it...but where are your rock sliders from?

@1stgenoffroad 5 лет назад

Talk to billy at BruteForceFab.com

@EverymanGear 5 лет назад

1stgenoffroad Will do… Thanks for the quick reply! 👍🏼

@HereFourYou 3 года назад

Hey man where can I purchase this bumper? The link is out of stock?!

@jasonscoggins01 4 месяца назад

@sergioefernandez5004 5 лет назад

hi the looks great i do have Tundra 20004 i know i can you fit one of those can you tell me where i can get one of those? for my Tundra 2004 double door SR5

@1stgenoffroad 5 лет назад

Here you go: www.1stgenoffroad.com/store/p83/2000-2006_Tundra_Off_Road_Bumper_.html#/

@christopherbodea3916 6 лет назад

Did you make a video on the rock sliders?

@1stgenoffroad 6 лет назад

That's next.

@robsnizzle7 4 года назад

The bumper you've installed, this will fit in an 06 tundra correct? But it's NOT listed under the tundra portal area in your website.

@1stgenoffroad 4 года назад

Check with Billy at BruteForceFab.com. Tell him I sent you.

@PEBELtbk 6 лет назад

I need one now haha

@1stgenoffroad 6 лет назад

I love this bumper. #FavoriteMod.

@MRTano512 6 лет назад

Want it!

@nickf6476 6 лет назад

any idea on the added weight of that bumper? Just curious for front spring rates.

@1stgenoffroad 6 лет назад

About 150 lbs

@harmonize209 6 лет назад

On this video are you running stock coils and what sitting was on the 5100? Do you recommend stiffer coils after the bumper install?

@1stgenoffroad 6 лет назад

Stock coils with Bilstein 5100s set to middle notch. I recently changed them out to Icon coilovers with a 700 pound spring and deleted the front sway bar links. Also added a winch. Here's that video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S2unFVNRry8.html

@horaciogaona2116 4 года назад

SWEET truck! where did you get your rock sliders?

@1stgenoffroad 4 года назад

Thanks. Sliders came from bruteforcefab.com

@snacpac6060 3 месяца назад

Have you fitted a winch yet to this bumper? What are you running? I’m wondering if the badland apex 12000 will fit under it if I relocate the solenoid

@1stgenoffroad 3 месяца назад

I put a 12K super winch on. Had to relocate the solenoid next to the air box.