EP.88 Mavic Aksium Race rear hub service (2/2) (Aassembly) 

thanks for the good video a couple of months ago I was repairing the rear wheel and I fixed what was broken and then something else broke and I now saw it in your video that I did not put and now I put now the wheel works flawlessly.Thanks again .

If you pop the seals on the three bearings clean and refresh the grease you will never need to replace, the bearings are so heavy duty you with your mere body weight will never wear them out

I follow you from the Caribbean in Tulum, very good videos

what tools do i need for Disassembly / Aassembly this wheel? can you link it anywhere or put it in the video discription please?

Hi, I have the Aksium rear wheel, recent purchase from a shop, and have an intermittent buzz coming from it. Generally over 15mph and I can control it by pedaling forwards or backwards. It lasts only seconds...maybe 5 to 10 seconds and as intermittent I never know when it will occur. I'm familiar with Mavic wheels, having my Ksyriums for near 20 years, so I'm comfortable servicing them. I removed the freehub body and inspected it last night but other than a bit dry I saw no wear, etc. that could be the cause...everything looked normal but the pawl springs seemed a bit weak compared to the springs on my Kysriums...I swapped them for a test and after lubing reassembled. Haven't ridden it yet so can't comment on if it still occurs. I've never heard this sound from my K's and that's after many years of hard riding/racing. What are your thoughts? Suggestions/advice is very appreciated. I Googled my problem and found you...thank you for a great video, I watched both. Also a subscriber.

This core tends to take slack, how would you solve it?

Hello friend, thank you very much for the video, very explanatory. One question, the rear mass has 1 6001 bearing and 2 608 bearings?

Nice assembly, thanks ! Do you have video's of Mavic Crossmax I and Crossmax II also ? I did not find. Or similar road rear hub type.

Could tell about de dimension of the bearings?

Yeah- I got the little washer wrong on reassembly, which meant it was too loose AND too tight (binding) at the same time . Thank you!

I did the same but my wheel is now acting strange when I turn my bike under big angle. Feels like bearings are jamming 😢

Hi , thanks for your videos, i have a question about oil you had put in the nucleus, that oil not is specific to Mavic. that is ok in a future ..? Thanks again..¡¡

Ciao , la mia Axium Race posteriore fa un rumore assordante (non di cricchetti) in discesa senza pedalare...girando la ruota a mano è ok...cosa posso provare prima di portarlo da un meccanico ? Grazie

Porque essa roda fica tão pressa quando aperta o final

You use grease instead of mineral oil to lube cassette body...Surprising!

What about the white "plastic" bushing/bearing which in real life wears out before the ball bearings?

Too much grease

Learn how to use drifts correctly.