I’m glad I found this. I’m trying to set up the transmission servos on a vanquish phoenix and was having a really hard time. It would be awesome if you did a video like this for more of the functions, it’s not easy finding information on what it’s capable of.
Hello, sir. We have made some tutorials on RC6GS V3. You can check these tutorials on our RU-vid channel. And here is the detailed manual of RC6GS V3 for your reference: www.radiolink.com/rc6gsv3_manual It introduces all the functions on RC6GS V3. And if there is any question when using RC6GS V3, please feel free to contact us. Our email is:after_service@radiolink.com.cn
Thank you for your support. If there is any question when using RadioLink products, please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. You can reverse the steering in the basic menu, REVERSE. Here is the detailed manual of RC6GS V3 to show you how to reverse the steering: www.radiolink.com/rc6gsv3_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Buongiorno ottimo video, desidero sapere il tasto SWD assegnato come L-KD si illumina di rosso quando viene premuto solo per un attimo, è possibile fare che quando il tasto SWD è in ON resta acceso è quando è in OFF si spegne?
Hi, sir. You can adjust the set of switch when setting it. For example, you set LK-D when it is +100 servo value last time. This time, you can set LK-D when it is -100 servo value this time. Then the light condition may be changed. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. The alarm voltage depends on what battery you use. For example, if you are use lipo battery, with full voltage of 4.2V for each cell, we recommend you to set 3.7V for each cell. For example, 2S battery with full 8.4V, you can set alarm voltage as 7.4V. You can also set different alarm voltage as you like. If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Could you please take a video to us to show your problem? It will be helpful for us to know what happened and solve your problem. Our email is: after_service@radiolink.com.cn
Куда Ви серво привод подключаете у меня только отудова подключаю регулятор скорости Подскажите как подключить регулятор скорости на rema hoby s max 500 рублей кто подскажит и
Hi, sir, what transmitter and receiver you are using? Please connect the steering servo to channel 1 of the receiver, and ESC to channel 2 of the receiver. You can check the connection from the detailed manual of the transmitter. Here is the detailed manual of RC6GS V3 for your reference. www.radiolink.com/rc6gsv3_manual If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi I just bought the rc6gs v3. How can i use the rc6gs transmitter with dumbo rc receiver in my car.? The car currently has a lightcontrol box connected to tye dumbo rc receiver). If i use rc7fg then i loose the lighting functions. So i want to use dumb rc receiver thanks
Hello, sir. RadioLink control system is not open-sourced. RadioLink transmitters are only compatible to RadioLink receivers. So sorry RC6GS V3 transmitter is not compatible with DUMBO RC receivers. We recommend you to change it to R7FG receiver. Connect the light control box to R7FG and then you can also get the lighting function.
@@Radiolink_official @Radiolink hi thanks. How do I coonect the light control box to R7FG? It does not have separate pins for a light control box. Can I split the channel different channel cables? so for example for channel 1, one end goes to the servo and the other goes to the light control box? Thanks