Radiolink's official RU-vid channel is home to everything Radiolink, showcasing the full and incredible capability of our products including the DSSS&FHSS hybrid spread spectrum 12 channels remote controller AT9S Pro and AT10II, 8 channels, S-BUS&PPM&PWM signal working at the same time controller T8S, T8FB. 8 channels NEW pistol grip radio RC8X, 7 channels gound transmitter RC6GS V3, and 5 channels pistol grip radio RC4GS V3. Balance charger CB86PLUS, flight controller PIX, and Mini Pix, M8N GPS SE100 and TS100, altitude hold by inertial navigation mini racing drone F121, and 3D aerobatics fixed-wing A560.
Official Website: www.radiolink.com Official Shop: www.radiolink.com/where_to_buy Tel：86-755-88361717 To be our dealer: sales@radiolink.com.cn After-sale Service Email: after_service@radiolink.com.cn
Hello, I have bought a AT9S-Pro and with a R9DS however my controller is not connecting to my receiver. I can’t solve this issue after persistent trying, please help.
Hi, sir. Thank you for your support. Could you please first make sure the receiver is successfully bound to the transmitter? Here is a binding tutorial for your reference: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c3K19QB2_xE.html By the way, you also need to make sure the RF mode of AT9S Pro is turned on so they can be bound. If they are bound successfully, but the signal is often lost, could you please check the tutorial here to test RSSI? You can also send your RSSI testing video to us. Our email is after_service@radiolink.com.cn
@@Radiolink_official I believe the receiver is broken as when connected to the esc with the signal cable on top, the light does not turn on, however when flipped the light turns on but it is unresponsive
Please, we need a video demonstrating how to configure the channels and switches on the radiomaster boxer or another radio with sound (gyro mode, manual mode, etc).
Hi, sir. Byme-A supports standard SBUS or PPM signal. So could you please make sure that your spektrum receiver supports standard SBUS or PPM signal? If yes, it can work with Byme-A. Sorry we have no tutorial of Byme-A and other radio, but you can refer to this tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8b0RTYwO8Yw.html In this tutorial, you can also know how to use other radio with Byme-A. In general, you just need to assign a 3 position switch for channel 5, and a 2 position switch for channel 7. For the sound, could you please contact the seller of the transmitter to know more about how to use the sound function? If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Thank you for your support. Here is the link of D460 for you to know more information of it: www.radiolink.com/D460 If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Yes. AT10II can work with Arduino. The simulator port of AT10II outputs PPM signal. And the receiver R12DS supports SBUS and PWM signal. Here is the link for your reference: www.radiolink.com/r12ds_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Can the RC6GS V3 firmware be uploaded onto the RC4GS V3 controller to unlock the extra channels and install the additional switches? Effectively turning the RC4GS V3 into an RC6GS V3? Thanks
Hi, sir. RC4GS V3 can update the firmware of RC6GS V3. But there are only 5 switches available on RC4GS V3 after you update the firmware. RC4GS V3 cannot be changed into RC6GS V3 by updating the firmware. And we do not recommend you to modify the mainboard of RC4GS V3 to add two more switches, as it may damage the mainboard. If you are using RC4GS V3 and want a RC6GS V3, we can apply for a discount for you to buy one. If you are interested in it, you can contact us via email: after_service@radiolink.com.cn If any question about RadioLink products please feel free to contact us.
How to replace the upgraded antenna that is now shipped and has the connector attached to it? Do you need to cut off the connector then just solder the center wire? No instructions with the upgraded antenna.
Hi, sir. Could you please check the old antenna of your RC6GS V3? Check if it is soldered or it has connector? If it is soldered, you just need to remove the connector of your new antenna and solder the new antenna to your RC6GS V3. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. The function you want can be achieved with the controller which can recognize PWM signal. Sorry we do not sell any controller, you can search it online. Here is a link of the controller for your reference: item.taobao.com/item.htm?spm=a21n57.1.item.8.62d6523ck8HRUj&priceTId=2147825517194520705061608e7b64&utparam=%7B%22aplus_abtest%22:%229bdd743c2507d91b57c4bdfb116c94b3%22%7D&id=646728658275&ns=1&abbucket=19 If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Yes. Both Mini Pix and CrossFlight have an anti-vibration system. Here is the difference of Mini Pix and CrossFlight for your reference: www.radiolink.com/newsinfo/841014.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Thank you for your support. Could you please check the detailed manual of CrossFlight? www.radiolink.com/crossflight_manual It introduces details on Battery Monitor Setup. It is in Chapter 5.2.3 Connect the Spare Parts. You may check it. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@user-us9nu2re3l Great to hear that. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Here is the link of it for your reference: www.radiolink.com/automatic_driving_system If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Here is the link of it for your reference: www.radiolink.com/automatic_driving_system If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Yes. Here is the link of it for your reference: www.radiolink.com/automatic_driving_system If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Do you mean "REVERSE" function in RC6GS? There is NOR and REV. The default value is NOR. If you think the direction is not corect, you can set it to REV. Here is the detailed manual of RC6GS V3 for your reference: www.radiolink.com/rc6gsv3_manual_download If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Here are two related tutorials for your reference: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xc_4GrUgEZk.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SzS1kc6ShrE.html And you also check the guide from our official website: www.radiolink.com/t8fb_bt_app If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
in the manual it says that: Crossflight with factory date after August 16, 2023 (including the 16th) can update firmware by default through Lodi ground station and open source ground station. Before the factory date is 2023.8.16, the firmware can only be updated through the Radix ground station and only the Radix firmware is compatible. How can I find out the manufacturing date of the crossfligh?
Hi, sir. Connect the CrossFlight to the Radiolink Mission Planner, there is a (d5a4c778) default that can upgrade the firmware by both the Radiolink Mission Planner and ArduPilot Mission Planner. You can check more details from this link: www.radiolink.com/crossflight_firmware If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hello, I'm configuring trad heli with crossflight but the board doesn't enter ESC calibration mode with the lights flashing in the calibration pattern. The board only starts normally even after doing the process in the mission planner. I'm using MP and firmware Radiolink.
Hi, sir. Here is the ESC calibration for helicopter for your reference: ardupilot.org/copter/docs/esc-calibration.html Here is a tutorial of ESC calibration: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gYoknRObfOg.html You can follow it. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
I like the idea of the radio but I would definitely recommend that you sort out the range problems with it instead of messing around with different themes !!
Hi, sir. The control range of RC8X is about 600 meters on the ground when using with R8FG receiver. Is there any problem when you use RC8X? If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_official I know that is what the range ment to be but that doesn't happen the range is not good it cuts off and your customer service doesn't really give the customers a good clean answer always telling us what it should be but never actually solving the problems
@@Fonzierc Hi, sir. If there is range problem when you use RC8X, could you please test RSSI by following the tutorial? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RA0NasTZS90.html If there is any problem of RSSI, there must be some problem of your transmitter or receiver, you can check the antenna condition. If the antennas are in good condition, could you please change another receiver to test RSSI to confirm if the problem comes from the receiver or transmitter? If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Here is the difference between the minipix and crossflight for your reference: www.radiolink.com/newsinfo/841014.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi can you make a video for 5 positions switch for gear change,but not equal distance like-100,-78,+60,+80,+95 this is sample of the my gear positions for three forward,neutral and reverse does it support for that thanks Anyone else know about it please give me the link please thanks
Hi, sir. You can use 3 position switch for gear change, sorry 5 position switch is not available. But I can send your feedback to our engineer and hope it can be achieved in the future. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
What is the esc of this helicopter in the video, which servo is it using? please!😊🙂🙂🤔I need a lot of information so nothing goes wrong. I'm wanting to buy one.
Hi, sir. Sorry we do not sell the helicopter. Could you please search it online and get more information of the helicopter? If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_official OK thank you! To answer . I wanted to know about the brand of the helicopter's esc and the brand of the servos. So I can assemble it with the minipix radiolink controller. and nothing goes wrong when taking a test
@@MrCADU267 Hi, sir. Sorry we do not know about the brand of the helicopter's ESC and the brand of the servos. Here is the link of the helicopter in the video for your reference: www.amazon.com/Aircraft-Channels-Helicopter-brushless-Suitable/dp/B0C5QP3G8S If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Yes. Mini Pix and CrossFlight all fit helicopter. Their using methods are similar. Here are their links for your reference: www.radiolink.com/crossflight www.radiolink.com/minipix If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Here is the tutorial for you: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TyY5naod3ZQ.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. It is plastic. You can check more details of RC6GS V3 from the link here: www.radiolink.com/rc6gsv3_specifications If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@gleidsonsantosfreitas3616 Hi, sir. Thank you for your feedback. We'll improve it and make customer know about it in the future. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. It depends on the range of the camera. The greater the power is, the farther the transmission distance. Theare are 3 power available for the camera (including 25mW, 100mW, 200mW) The maximum control distance may be 200-300 meters on the ground. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. In general, the new firmware improve some new functions. If you need the functions, you can update the firmware. Don't worry. There is no risk for firmware update because firmware update only add new functions. It won't change your original settings. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
THE USB PORT WILL NOT SHOW VIDEO ON THE APP. THE REMOTE IS NOT DETECTED BY THE PHONE. PLEASE SHOW A VIDEO HOW TO CONNECT THE REMOTE TO THE PHONE VIA USB SO THE VIDEO SIGNAL CAN BE VIEWED.
Hi, sir. If you are in Hong Kong, we recommend you to buy our products from AliExpress. Here is the link for your reference: radiolink.aliexpress.com/store/4714037 If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Are you using SKYDROID transmitter? Could you please contact the after-sales of Skydroid? We are after-sales of RadioLink products. Sorry we do now know about their products. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. We connect a 1S lipo battery to R12DS in the video. The working voltage of R12DS is 3.6-12V, so you can connect 1S or 2S lipo battery to R12DS. Just make sure there is JST connector for the battery. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. If you are in Hong Kong, we recommend you to buy our products from AliExpress. Here is the link for your reference: radiolink.aliexpress.com/store/4714037 If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. You can buy all the spare parts of our products from our AliExpress official store. But not all the parts links are available, but you can contact AliExpress sales for the purchase link of the parts you want. Here is the link of our store: radiolink.aliexpress.com/store/1101309511 You can ask AliExpress sales for the link of RC8X screen. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
I have a track setup like a tank. In other words, CH1 and CH2 are mixed for forwarding and turning. In this case, how can I achieve the cruise control?
Hi, sir. Yes. You can achieve cruise control for tank. Just set the cruise control, it will work well with your tank, If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Very helpful video for FPV user. One thing you have to check. In the DJI FPV Air unit manual, the external power source for the air unit is within 7.4 ~17.6 V (2S~4S). Otherwise, air unit may be damaged. To use 6 cell battery will damage the DJI FPV Air unit, I think.
Hi, sir. CrossFlight supports ESC of PWM, DSHOT and ONESHOT. If your ESC supports them, they can work together. The current and the voltage of ESC depends on your power supply and motor. For example, if the power supply voltage exceeds the working voltage of the ESC, the ESC will be burnt. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@MrCADU267 It is the protocol of ESC. You can ask for the seller of ESC for more details. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Sorry there is such sensor. So you cannot get the speed of the motor. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. Yes. It can. Here is the detailed manual of AT10II for your reference: www.radiolink.com/at10ii_manuals If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. You need to check what DSHOT your ESC supports. If you don't know about it, you can check the manual of your ESC for it. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. The blue version is CrossFlight. The black version is Mini Pix. Here is the comparison of them for your reference: www.radiolink.com/newsinfo/841014.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@MrCADU267 Hi, sir. Yes. CrossFlight has Vibration Damping by Software. The actual effect may varies for different models. Here is the link of CrossFlight for your reference: www.radiolink.com/crossflight
Hi, sir. What RadioLink products do you want to buy? You can check if it is available in this link: robu.in/product/pixhawk-radiolink/ This is one of our dealers in India. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. The video comes from our customer. Here is the detailed manual of RC4GS. You can check the detailed manual and see if there is any function you need. radiolink.com/rc4gsv3_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. What do you mean that you cannot open the file? For firmware of RC6GS V3 and RC4GS V3, you just need to download it. No need to open the firmware. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi, sir. MayI know what transmitter are you using? You can download the firmware from our website: radiolink.com/rc6gsv3_firmware radiolink.com/rc4gsv3_firmware If you cannot download the firmware, could you please send email to us? So we can send firmware to your via email. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Negative throttle rate doesn't work, which is the only way that makes sense for fuel vehicles. It should make it so that when throttle cut is NOT active, the throttle won't go below a certain amount (which would cut the engine)
Hi, sir. Do you mean the RATE in throttle cut function? The RATE can be set from -30% to +30%. You may have a check. If any question please feel free to contact us. And you can also take a video to us so we can better understand your problem. Our email is: after_service@radiolink.com.cn
