THSPD function applies to all RadioLink transmitters such as
RC6GS V3, RC6GS V2, RC6GS, RC4GS V3, RC4GS V2, RC4GS and so on.
THSPD, called throttle speed or throttle servo delay. It’s a commonly used function in RadioLink transmitters such as all versions of RC6GS and RC4GS.
As we all know, sudden trigger operation on a slippery road may cause the wheels to spin and the vehicle cannot accelerate smoothly. Setting the throttle speed can reduce wasteful battery consumption and make smooth throttle operation.
The MODE of THSPD defaults to OFF. Speed1 or speed2 can be selected.
For SPEED1, the delay setting works for the whole throttle travel. It defaults to 100, which means there is no delay. 0 means the slowest throttle speed(full delay)
For SPEED2, it divides the whole throttle travel to 2 parts, which means you can set different speed for the front part and back part of the throttle travel. LOW means the front part. I set it to 0, the slowest throttle speed. High means the back part. I keep it 100, which means no delay. And TGP means the cut-off point of the travel, which defaults to 30. I set it to 50.
Now, let’s check the servo display. Throttle goes very slow in the first half , but goes with no delay in the second half.
For more details of RC6GS V3:
www.radiolink....
Purchase link of RC6GS V3:
www.radiolink....
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
2 окт 2024