I'm gonna show you how I use the Epever Tracer 2206an MPPT solar charge controller and I'll tell you two things that I don't like about it. Also some settings will be shown, accessories and building quality.
Hey dear I am facing power dropping issue in series connection. I have connected 340watt and 380watt solar panels in series to epever 40A mppt controller with 12v battery. It show power of one panel when I disconnect solar connector and reconnect, the mppt show both Panels. It’s hard to do this every morning. It was fine in winter but now summer starting and facing this issue. Using both panels form 2 months. after wire disconnect and reconnect the voltage jump from 33-36 to 75v. If something wrong with one solar panel then it should not work after replugging mc4 or solar wire in the mppt after that It work whole day but same issue next morning Both panels volts amps are little different. Tesla 34.51v maxpower 33.18v. Tesla amps 11.01amps maxpower 10.29amps.
Yesterday I could borrow an MT50 from someone and found out that one of my two mppt is not read by the MT50. I could access one mppt and program it in user setting, but the other one doesn't communicate with the module as so I can not read/write from the MT50 to/from the mppt. :-( Is there a way to reset this mppt TracerAN to reboot ?
