Epoxy Application Tips: Permatex Tech Tip Series 

Just bought this! So glad I have this video to reference! How did we survive without RU-vid back in the day 😅

So glad I didn't screw up my project since I had no idea how to use this stuff. Thanks

I am about to apply binding to a guitar so this video was very helpful. Thanks 👍

Exactly what I was looking for. Wouldn't have known about having rubbing alcohol handy from the package and it was a must. Great info thanks

This video was very helpful also give me a better understanding of epoxies and with the how to use them and the what of applications usages with setup & presentations of epoxies

8/2018 I used the metal filler/oil pan repair on my 1996 Jeep GC and a pin hole in the oil pan. I drained the oil and sprayed with brake clean, then used 80 grit then spayed again with the brake clean, I bought 2 tubes on Amazon for 13.00 and used both, let sit for about a night then used tube 2, after another day of drying I added the oil nd NO MORE LEAKS, great product and hope it lasts

Love this stuff

thank you for this info :)

Bang on! Thank you man.

Great Professional Video, A Big Thanks! Epoxy is a great strength bonding gel material. Thomas J. Vanderloop, Author, Technical Instructor & Manufacturing Consultant (AWS & SME Memberships)

How do you tack the cap off to start using the syringe? All seems to be a solid piece of plastic. Do you have to cut off “butterfly“ on end with a knife?

2:43 "Use lots; we're happy to sell you more.";) Legit advice though, because the resin and hardener often require different pressure to dispense. So the plunger flexes sideways, initially pushing out more of one than the other. The more you dispense, the less that volume difference matters.

i bought this stuff.. mixed it.. and its been like 8 hours and its not very hard.. just a thick mooshy sticky texture.. is there any way to make it harden with a spray ? like ca glue has ?

Can i use this to a broken plastic chair?

This guy can beat me up.

Rubbing alcohol? What about Acetone for actual cleanup? A great mixing stick is a disposable wooden chopstick from a Chinese takeout restaurant. One takeout chopstick can easily be used for four epoxy mixing episodes. I create custom epoxy application tools by sanding a chopstick to the desired shape & thickness on my benchtop belt sander. Good tip on the Superglue vs Epoxy application use case.

Thanks for the video but My Permatex 500° Epoxy, did not work. It became brittle by high heat. I used to cover crack leak on my coolant reservoir but it does not stick- gets brittle and peeled off after few hours of driving.

Hello, I have a doubt, the Permatex Plastic Weld is water resistant.

I have purchased twin syringe epoxies and experienced frustration with first use because one syringe or the other is clogged. When the plunger is pushed, you get a s**t ton of the contents of the unclogged barrel. This is with a brand new container, just opened. Apparently these type dispensers have a very limited shelf life.

can this work for a nuts for a seat

worked great 1st time used it 3 months later went to use the rest and 12hrs later its still sticky, don't bother keeping the left over in the 2 part mixing Permatex what you don't use chuck in the bin and buy another next time you need it to save yourself the problems cleaning sticky epoxy off

Can i use this to fill the pin hole on water pressure tank.What type of epoxy should i used?

i used epoxy its very strong

Best tip not said in vid: seperate 2 syringes with scizzors, so you can actually make 50/50 mix

Hi Curtis

Question will the plastic epoxy glue HDPE ???????????

Reasonably good video but for one thing. The project shown, is never going to hold together with that epoxy repair attempt. It's going to be nowhere near as strong as the original material was, which already broke once. Something like that needs a minimum of a metal reinforcement back plate put on to reinforce it.

Don’t mind me scouting info for my dad

3:15 seconds to get to the fucking point.

Why are you in a tire shop to talk about epoxy.

Esa vaina no vale compre uno de esos para pegar un shifter de bicicleta ..el q no sabe q es eso le explico eso es la palanquita de freno de bicicleta...y q creen compre ese producto segui los pasos al pie de la letra espere 4 horas..y hay dicen q en 10 minutos pega ..mentira coji presione la palanca de freno y se volvio a despegar...pague $5.00 americanos es una estafa .....les recomiendo no comprar

Tips for version 2.0 of this video: 1. Don't say "don't use a plastic cup to mix your epoxy" and then play video of the demonstrator (the person who should be doing everything correctly) using a plastic cup for mixing the epoxy. 2. Don't neglect the repair quality of your demonstration piece as in this video the part being repaired is about 1/4" out of alignment ( see 4:30). 3. Do use some of the tips you suggest in your text such as the tooth pick and the popsicle (R) sticks. Human minds are conditioned to remember things better overall if there are matching audio/visual aids involved. 4. Know your audience. This is likely to be viewed by customers who fix expensive equipment as why not just buy a new part if the part was cheap to replace, right? This means they are, on average, of high than average intelligence, more likely to pay attention to details, and more likely to use critical thinking to solve issues in their lives. If you present a seemingly hap-hazardly put together video like this, you are sending a message that you do NOT pay attention to details, that if you are so careless with how you present your company and your products you may similarly be careless with other aspects of your business, aspects which may negatively impact your customers (e.g. lack of attention to epoxy quality standards resulting in recalls and potentially fatal product failures in the field.) Your product seems decent, you deserve to have it viewed as such. Hire a professional staff with a couple attention to detail nerds like me next time.

This guy is really triggering.

Esa vaina no vale compre uno de esos para pegar un shifter de bicicleta ..el q no sabe q es eso le explico eso es la palanquita de freno de bicicleta...y q creen compre ese producto segui los pasos al pie de la letra espere 4 horas..y hay dicen q en 10 minutos pega ..mentira coji presione la palanca de freno y se volvio a despegar...pague $5.00 americanos es una estafa .....les recomiendo no comprar