Epoxy Bottom Coat on Jon Boat | HOW and WHY

Подписаться 55 тыс.

Просмотров 69 тыс.

50% 1

Epoxy Bottom Coat on Jon Boat | How and Why
Use code "BRIGADE" at checkout to save 10% off your entire order from 6th Sense.
6thsensefishing.com/
Crappie Collection found here - 6thsensefishing.com/collectio...
At Waterland Fishing Optics use code "BRIGADE" at checkout for 15% off your order.
www.waterlandco.com/
Use code "BRIGADE" at checkout at TBNation site, your one stop boat building shop, for 5% off your entire purchase.
tbnation.net/
⚡️⚡️⚡️
Epoxy bottom coat used in video-
amzn.to/3Ip5q2C
Epoxy tint used-
amzn.to/3xFEGWX
💦
Welcome to chapter nine of the Porta Jon build! In this video I tackle the bottom coat portion of the project!
The boat is a 1232 aluminum jon boat and the bottom coat I will be applying is Fasco Super Slick epoxy bottom coat. I heard great things about this product and wanted to give it a try on my personal jon boat side project.
In this video I will cover a variety of things-
-Why use bottom coat and what is it?
- How to prep the boat bottom properly, including rivet replacement
-Taping and cleaning
- Product and product knowledge
- Mixing bottom coat epoxy properly
- Application
-What I would do differently after applying for first time
- Tools and materials needed
- Tips and tricks
-Testing the boat on the water
-Final thoughts
This epoxy bottom coat project turned out great on my aluminum 12 foot portable jon boat. Very excited to share this video with you covering everything I did and what I learned. Enjoy.
👇
FIND ME ON SOCIAL MEDIA-
Tik Tok-
brigadeboats
Instagram: invitescon...
or adubjones
Facebook- / brigade-boats-10071137...

Опубликовано:

20 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@AnthonyJonesBrigadeBoats Год назад

Penetration is spelled wrong in video. Missed in final edit. Totally not an Easter egg. Thanks for watching!

@bretburt7317 Год назад

Glad you didn't trash the video of the mistakes. That helps us all for a great final product.

@AnthonyJonesBrigadeBoats Год назад

I was so close, man. It was pretty stupid to leave it outside but never considered it not curing and dew getting in it. Then, I didn't know how I'd recover to make a fluid video given the circumstances. Almost gave up. Then I thought, maybe the audience could benefit from my mistake if I edited it properly. Fun fact for first comment- I actually applied the first coat in October of 2021. The boat sat after the incident for that winter into spring 2022 until sanded. Then, 2nd recoat was done in September of 2022, then final drone footage and testing shot in February 2023. To say this project has been a long time coming or a side project is an understatement at this point. There are plenty of boats to work on around here! I'm glad to finally get this out!!! Thanks for the support.

@ColtBiddix 7 месяцев назад

Your integrity in this video has earned my subscription. Always own mistakes. You are a master of your craft sir

@briangullickson9013 Год назад

Thank you for continuing this project and sharing it, I’m about to use this exact product on my Alumacraft 1236. Extremely helpful, thank you!!

@AnthonyJonesBrigadeBoats Год назад

Glad i can help! Thanks for following along! Hoping to give this boat another run this year and see it to the end.

@tbnationoutdoors-nateeckhold Год назад

Cuz. Great step by step.

@buckreynolds1779 Год назад

I have completed the wiring on my new 1548. Your videos and others helped a ton. Thanks...about to tackle the carpet..debating on buying a staple gun (air)

@AnthonyJonesBrigadeBoats Год назад

Awesome to hear. I would if you already have a compressor. SO worth it. I bought a Wen Staple gun for my compressor and it was like 25 bucks on amazon, used it on a few boats now, should have bought one sooner.

@amblo51 Год назад

Looks nice and tight around the rivets!

@AnthonyJonesBrigadeBoats Год назад

It is man! Great product. Definitely no leaky rivets here.

@donnisouth-paw83 11 месяцев назад

Perfect I have a 12ft, 44" wide Jon boat

@candyleady-ov8tx Год назад

Great video it showed the trials and tribulations of life

@AnthonyJonesBrigadeBoats Год назад

Absolutely. Thank u

@waynegilchrist1596 Год назад

Best part is that you remedied your mistakes and showed a successful end result. Nothing about your "before and after" performance evaluation is scientific because it's the proverbial " apples to oranges" comparison. It's overly obvious that the coating dictates improved resistance factors and considering the drop in speed is nominal against the added weight, the coating is successful. Thanks for sharing.

@AnthonyJonesBrigadeBoats Год назад

Thank you for the great response! Like i said in the video, I'd like to do a true before/after bottom coat test one day. Even with that, there are so many small variables that could affect speed changes unless it was considerably noticeable, im not sure you could pinpoint it one way or another. Another thought I've had is that perhaps the epoxy won't shine at low speeds. It was designed for air boats, so perhaps significant speed increases can be seen at higher top speeds on boats that can actually get on plane. Who knows?

@waynegilchrist1596 Год назад

@@AnthonyJonesBrigadeBoats keep going, you're doing fine.

@redstephens9218 Год назад

We need to see the mistakes so we don't make them!! Really do appreciate the videos you put out!!! Well done!! Keep it up!!

@originaloldpop8405 Год назад

thanks much for your vid and mostly for sharing your mistakes as I am considering doing the same thing to my 14' jon next month. would like to know about the side pods, my jon is narrow and anything to get a little extra stability would be well worth it

@besearchingforwisdom6267 Год назад

Interesting stuff and a good job on the video, you might have found your speed losses in the motor and electrical systems or possibly from weight gains also, but I would have been interested in the epoxies durability and possibly if it offers protection from electrolysis around the transom from the motor. Keep up the good work

@tracefilipp5950 Год назад

I recently coated a 1652 Jon boat with fasco and did the whole outside. I really agree with all of the advice given here. Especially the choice of applicator I used brushes bc the rollers I tried didn’t leave a good finish, but the roller looks like it worked really good in the video. So maybe it was just the rollers I was using.

@AnthonyJonesBrigadeBoats Год назад

Yeah man it was like night and day just by using a different roller. Also its way more workable in application in thin coats by applying from tray and not pouring and spreading like i had seen and heard so many others do.

@nate8249 Год назад

How much did you need for it?

@brianmoreno4527 Год назад

I might have missed the correct spelling myself with no hard feelings cuz.. keep up the good work.. enjoy watching your video's along with tiny boat Nation, you all have inspired my build.. picture out to the left of my project...

@AnthonyJonesBrigadeBoats Год назад

Thanks, cuz. Yeah, I went through and did the word overlays last in the edit. I simply missed it until i watched it after I put it up. Whatever...lol. It's not like I have an editing team over here, lol. Then, when it rendered the final video, I still had some images that changed ratio after the edit. Said send it and just put it up. Appreciate the support man 👊

@LifewithJames Год назад

I drilled out the loose rivets on mine and replaced with stainless machine screws and washers then coated the bottom of mine in flex seal. It’s been doing awesome but the only downside is I can never paint the bottom of the boat because paint won’t stick but

@JenniferJefferson-jo2yf Месяц назад

Any thoughts on flex sealing the bottom of an old boat? It’s like a pin cushion. Just trying to go easy and inexpensive.

@herewegofans Год назад

Anthony, can you share how this [or other] bottom epoxy holds up to truck bed and bank sliding? Do the high points of the boat bottom get scratched off quickly or it has been durable? Looking to add something slick to a 1444 build and second highest reason if durability from transport on off scrapes and scratches, to the drag and sliding for access to rampless ponds or marsh. I haven't seen anyone show a real test in that they use their boat for a year [whatever period], each week [defining the use amount the boat actually gets], trailerless, to access what type of water crossing what type of surfaces with, and finally the before, hoping mid use, and after shots of the bottom finish. I have lots of sand, muck, and rip rap dot rock I cross to gain access to low/no pressure areas and fish. My JB is getting a whooping from these crossing so I am investigating what actually works. Thanks again, you rock.

@LukeNeidig 10 месяцев назад

I’m about to make a porta Jon out of my landau and I’m probably going to to do the same exact design almost but I really like your shark teeth on the front , did you paint that or is that like some sort of adhesive deal

@dantehill4748 10 месяцев назад

Great video. Would you say one pint = one coat? Or do you think one pint could cover both coats on a 1436. Thanks. Trying to avoid not ordering enough but looking to save some pennies.

@waynejones5170 Год назад

Can you paint this after it’s applied and cured?

@jackmasters9953 2 месяца назад

Great video!!! Cool project 😃Will this product work on the 4”crack in the hull of my Lowe 175 ?? Can it be mixed in small amounts? Thanks in advance 🎣🎣

@SouthernRancher13 Месяц назад

also can I apply it over old sanded down paint or do I need to go to bare metal

@maryhopkins743 Год назад

I have a similar sized Jon boat. I’m having trouble finding a cover that fits. The covers I found fit 54 inch width. Have you found a cover that fits? Or can you recommend a one for a 32 inch width?

@miketaylor775 8 месяцев назад

How much weight does the coating add?

@eccentricsmithy2746 9 месяцев назад

spray on truck bed liner is the best

@AnthonyJonesBrigadeBoats 9 месяцев назад

For truck beds, yes.

@maxlagaipa9148 Год назад

great video ! i was wondering if i can use bedliner application instead of epoxy ?

@AnthonyJonesBrigadeBoats Год назад

Technically you can use water you want i guess..At the end of the day, bedliner was designed for truck beds, epoxy bottom coat was designed for boat bottoms

@steveenczi8967 Месяц назад

Do I have to take the grinder to the boat?

@SouthernRancher13 Месяц назад

how many coats should be applied ? is more better???

@dropshotdave1928 Год назад

Would this stick to the bottom of a pond prowler? I know it’s plastic, but I like the idea of making it a more slick surface

@AnthonyJonesBrigadeBoats Год назад

I'm honestly not sure but Fasco answers their calls! I'm sure they'd be able to help.

@charlesparmenter5515 2 месяца назад

Do you recommend 2 thinner coats. I have a valco that would be around 2 qt needed to coat the bottom and bow. Or mix up 2 and do one coat with 2 ppl rolling

@AnthonyJonesBrigadeBoats 2 месяца назад

Definitely 2 thin coats. That's what Fasco recommended and you'll get a better and more consistent finish.

@charlesparmenter5515 2 месяца назад

@@AnthonyJonesBrigadeBoats awesome thank you for that. I’ll order 2 qt kits. And make them 2 coats

@AXNJXN1 Год назад

So all said and done, is ONE application recommended (you vs the manufacture) or two?

@AnthonyJonesBrigadeBoats Год назад

They recommend two coats. I have seen people do just one thick coat. I'd recommend two rolled on even coats.

@gfernandez24 7 месяцев назад

Would u recommend stripper vs wire wheel like ur doing?

@AnthonyJonesBrigadeBoats 7 месяцев назад

How i did it is how i do it so that's my recommendation

@tomball7681 9 месяцев назад

Where did you get the side pods

@AnthonyJonesBrigadeBoats 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gos8Vs7_OgU.html

@bradlackey4748 20 дней назад

What kinda pods is on this boat?

@AnthonyJonesBrigadeBoats 18 дней назад

we made them custom..Videos on my channel

@lhoherz18 Год назад

Would stickers stick to this product?

@AnthonyJonesBrigadeBoats Год назад

possibly if sanded first. Epoxy dries "waxy" which prevents really anything from sticking well without roughing it up

@xxxxxxx3760 Год назад

Is it the same think as gator gard

@AnthonyJonesBrigadeBoats Год назад

no. different product, way different application process and cure time

@norml.hugh-mann 9 месяцев назад

Many variables up to and including wind and water temp and thermal expansion of the aluminum slightly changing shape of hull effect top speed..

@simeonames7182 9 месяцев назад

Hey Anthony I have a Jon boat how do I get in touch to get a quote to do my boat. I would love for you to do mine, I love your work and I enjoy all your videos

@AnthonyJonesBrigadeBoats 9 месяцев назад

Unfortunately I'm currently booked until next summer so at this time I am not locking in any further projects or quoting any new builds.

@DonLStueve 5 месяцев назад

Put boat plug from the outside. Seals better.

@AnthonyJonesBrigadeBoats 5 месяцев назад

I'll try that thx

@jeffwhiteside1124 10 месяцев назад

I'm so glad I don't live in a state that makes you spend that much on a motor so I can go less than 10 mph.

@AnthonyJonesBrigadeBoats 10 месяцев назад

The reservoirs are for drinking water, hence, no gas outboards. Its my choice to go there or not. Most guys use kayaks. I prefer the rednecks with paychecks method of a tiny boat with an electric outboard. These lakes are well managed, big bass, and very quiet. I'd rather go here to peacefully fish for tanks than the other option of going to the big lakes in Ga (Oconee, Hartwell, Lanier) and compete with every other 100K $ bass boat running 90mph and millions of wake board boats and party boats blasting rap music and creating massive wakes every 30 seconds. At the end of the day I'd rather fish electric only reservoirs than the bigger lakes and the electric outboard really isn't "that much" to me, $ is relative to the individual I suppose.

@jeffwhiteside1124 10 месяцев назад

@@AnthonyJonesBrigadeBoats True!! 👍

@bonafideadventures8425 Год назад

Sweet that Jon boat was worth saving. Epoxy has a mind of its own and it’s usually evil

@AnthonyJonesBrigadeBoats Год назад

Yeah absolutely very evil i learned lol. I didn't help myself though, lessons learned the hard way. All good in the end.

@dannypierce3878 Год назад

Just tighten the rivets or buy the right aluminum boat rivets , not carpentry rivets.

@AnthonyJonesBrigadeBoats Год назад

I car·pen·try /ˈkärpəntrē/ noun the activity or occupation of making or repairing things in wood.

@lucasfairburn8830 Месяц назад

That super slick stuff is garbage, it dries on like glass and makes it heavier, and cracks off in chunks. Gator glide is wayyy better, it keeps an oxygen layer in between the boat and doesn’t crack easy, I’ve had it on my boat for 3 years now no complaints.

@AnthonyJonesBrigadeBoats Месяц назад

Makes it heavier? lol. It, along with Gator Glide, can weigh no more than the volume of the quart, ounces....If you prefer to use a product that takes one month to apply, by all means use it. Sounds to me that if you in fact did use Super Slick, and it failed, it was an installer issue. I literally know 30 guys with this on their boats, including multiple boats of my own. No issues. And what the hell are you talking about oxygen layer? The old wives tail comparing the orange peel to golf ball demples creating micro bubbles which creates better hydro dynamics? If that were true every one would just use bed liner and be done with it.

@lucasfairburn8830 29 дней назад

@@AnthonyJonesBrigadeBoats I’m good buddy’s with the guy that owns copperhead mud motors, when they first came out super slick sponsored them and let them test it out. I personally don’t have experience with it but long story short guy at copperhead says it’s awful and doesn’t even compare to gator glide. And no it doesn’t take a month to apply, takes about 3hrs to do properly on a sunny day. iv installed gator glide on all of my boats and had no issues and it works great. I’m sure it’s not terrible for the price but I’d just spend the extra $100 and get gator glide.