Тёмный

Why Boaters Are Using This Bottom Paint | Gator Glide Epoxy Bottom Paint 

Chattanooga Fiberglass
Подписаться 323
Просмотров 4,3 тыс.
50% 1

In this video, I will be Demonstrating HOW TO apply Gator Glide G4 to the bottom of a personal watercraft PWC JET SKI on a Yamaha Waverunner.b in my opinion this is the most slick and most durable HULL Bottom Paintin on the market for Jet skis, Fishing Boats, Air Boats and pretty much anything it will stick to.
Replenish your JET SKI's HULL this season by following the steps in this video to ensure your Jet Ski HULL is protected and ready for fun and abuse over the season to better prepare yourself for the unknown of deep scratches and gouges that could happen while BEACHING or even incorrectly loading your Jet Ski on a trailer. This Protective Paint also will protect your JET SKI or Boat if you keep it in the water by PREVENTING Fiberglass DELAMINATIG
Product: gatorglide.com
Mix ratio: 7:1
Example-
Part A: 4oz. 8oz
Part B: 16cc 1oz
1/4 of part A into mix cup
1/4 of part B into mix cup
If you pour half of 1 quart of part A, pour Half of Part B into the mix cup as well. Which ever is easier!
Music: Sweet by LiQWYD | / liqwyd
Music promoted by www.chosic.com/free-music/all/
Licensed under Creative Commons: Attribution 3.0 Unported (CC BY 3.0)
creativecommons.org/licenses/...
Gator Glide Application, Best Hull Paint for Jet Skis, Best Bottom Paint For Jet Ski & PWC, PWC Protective Bottom Paint, Gator Glide, Super Slick 2000, PWC HULL Repair , Jet Ski HULL Repair, Bottom Painting, HULL Paint, How To Gator Glide PWC, How To Gator Glide Jet Ski, DIY Jet Ski & PWC Bottom Paint, Gator Glide, Bass Tracker Classic, Jon Boat Conversion, Jon Boat Fishing, Tiny Boat Nation, Jon Boat to Bass Boat Conversion, Jon Boat to Bass Boat, Duck Boat, Jon Boat, Fishing Boats
#painting #diy #boating #epoxy #gatorglide #jetski #boatrepairs #gelcoat #PWC #waverunner #fiberglass #howto #slickbottom #airboat #bassfishing #superslick2000 #Gatorglideonaluminumboat

Хобби

Опубликовано:

 

28 дек 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 24   
@mustangracer5124
@mustangracer5124 Месяц назад
There are some good slow (24 hr.) cure urethane paints out there now, I got some for my bumpers on my RZR and I swear it is tougher than any powder coat!. (about $30 a pint) plenty enough for a hull.
@vitoconginejr3283
@vitoconginejr3283 Месяц назад
One of the best videos for the process I have ever seen. Which is better for durability Gator Glide, or Super Slick? I know it is mostly a subjective opinion but I bet there are good points and bad for each.
@chattanoogafiberglass
@chattanoogafiberglass Месяц назад
Super slick has a TDS so naturally I trust it more
@vitoconginejr3283
@vitoconginejr3283 Месяц назад
@@chattanoogafiberglass Sorry, unfamiliar with the term TDS.
@chattanoogafiberglass
@chattanoogafiberglass Месяц назад
@@vitoconginejr3283 technical data sheet most chemicals and paints provide with information on use, instructions, reaction, etc
@bigboyben6
@bigboyben6 5 месяцев назад
It would be very helpful to see a video of you repainting a JetSki bottom and the process.
@chattanoogafiberglass
@chattanoogafiberglass 5 месяцев назад
I can do that. When I have another one come in and I have to paint it I’ll make a video. Almost the same process just sand the hull p600, base and clear or polyurethane paint like awlcraft 2000!
@chattanoogafiberglass
@chattanoogafiberglass 5 месяцев назад
Also I believe I have some SHORTS of some paint work and one on a white ski top side
@bigboyben6
@bigboyben6 5 месяцев назад
I have some experience painting car parts so I'll be using a hvlp gun, since this is a project ski am I able to use a single stage black on the bottom? I've seen that companies selling a epoxy primer looking for something simple. Also is just a scuff fine or do i have to sand all the way down like your gator glide video? thanks@@chattanoogafiberglass
@chattanoogafiberglass
@chattanoogafiberglass 5 месяцев назад
@@bigboyben6 p220 the hull, epoxy primer 24hr cure, sand epoxy primer p400 then p600 then use a single stage polyurethane. Awlcraft 2000 is best
@si-sb2mx
@si-sb2mx 4 месяца назад
never had such a smooth finish with single stage polyurethane, now that gun is coming from the States@@chattanoogafiberglass
@khalilkenouche2063
@khalilkenouche2063 4 месяца назад
Excellent vidéo.i would like to know how much of gator glide do you need to put in paint gun for one layer for waverunner ?
@chattanoogafiberglass
@chattanoogafiberglass 4 месяца назад
Check out the description I have mixing Instructions. 1 quart will do 1 ski
@khalilkenouche2063
@khalilkenouche2063 4 месяца назад
@@chattanoogafiberglass sorry my english is not good .i juste need to know how much did you put in paint gun to do juste one layer ? I undestund one quart is enought to do one ski but i need how much to put in gun paint for one layer .iam really sorry to bother you
@chattanoogafiberglass
@chattanoogafiberglass 4 месяца назад
@@khalilkenouche2063 you can roll it as well.
@chattanoogafiberglass
@chattanoogafiberglass 4 месяца назад
4oz part A into paint cup then pour 16cc/Ml part B into cup and mix.
@khalilkenouche2063
@khalilkenouche2063 4 месяца назад
@@chattanoogafiberglass thank you very much sir 👌👌👌
@rickss69
@rickss69 Месяц назад
Do you have to be pretty quick about removing the tape?
@chattanoogafiberglass
@chattanoogafiberglass Месяц назад
Remove before cure
@charlesprice7790
@charlesprice7790 2 месяца назад
Is there a reason for not using gatorbase first?
@chattanoogafiberglass
@chattanoogafiberglass 2 месяца назад
Gator base is the same chemical properties just different color for an indicator for when it’s time for a new top coat
@Mudcon
@Mudcon 4 месяца назад
What does it cost to have a wave runner done?
@chattanoogafiberglass
@chattanoogafiberglass 4 месяца назад
I charge $1500 that’s if there’s no damage on bottom
@hswing11
@hswing11 5 месяцев назад
So who cares it's the botton for pete shakes
Далее
АНДЖИЛИША в платье 😍
00:27
Просмотров 440 тыс.
Repairing the Hull on my Jet Ski
14:53
Просмотров 3,6 тыс.
Jet ski hull painting and finishing DIY
3:15
Epoxy Bottom Coat on Jon Boat | HOW and WHY
23:48
Просмотров 72 тыс.
Fasco Steelflex 2000
24:36
Просмотров 140 тыс.
How to superslick 2000 your jetski hull
7:04
Просмотров 4,2 тыс.
How to Apply Gelcoat -Part one-
6:59
Просмотров 259 тыс.
NanoXCel Hull Repair
20:54
Просмотров 20 тыс.
How to Paint the Bottom of Your Fiberglass Boat - DIY
4:56
APRENDA operar com mais SEGURANÇA
0:12
Просмотров 17 млн
The girl surprised
0:19
Просмотров 8 млн