I don't think you actually need that chip reset device. *NOTE* I found this in the Service Manual. I have an Epson Stylus Pro 4000 and I reset it by holding down left, up, and down arrows while turning on. Then go to Clear Counters > Maintenance Tank > and Clear Tank. If it doesn't work the first time, it should work after doing this a second time. Best of luck to you all!
hello, just wondering if i must have a chip reset device - as l have done everything else like you have guided - if i must where do i get one if living in Australia? cheers x
Hi, thank you for your tutorials have been very helpful, well I wanted to ask if you can help me with a problem I have with the printer, the LCD screen displays (ink low) try to reset the printer and I fill the cartridges but not the error is removed. as a way to fix this?
Narinder Pal Singh Resetting the maintenance tank on the Stylus Pro 4000The maintenance reset procedure for Epson Stylus Pro 4000. Turn off the printerHold down the three leftmost arrow buttons [left-arrow] [down-arrow] [up-arrow]Turn on the printerRelease the buttonsA new menu will appearPress the up/down arrows to get to the "Clear Counters" menuPress RIGHTPress the up/down arrows to get the "Maintenance Tank" menuClear the counter.Turn off printer.When you restart the printer, the maintenance tank should indicate 'Empty'Just remember to change it (or replace the wadding it contains)
