ES1 ES2 Kickscooter | Error 14 and 15 fix Tutorial 

Fixed mine in 5 minutes because of you, I really appreciate it. This video is completely accurate if you have the same throttle which most do.

Hey man just wanted to say thanks for the video. I got a code 14 about a year ago and yours is the first video I’ve seen to identify and explain in simple terms how to fix this problem. I tried a million different things to fix it and I wasn’t even close!!! It’s nice to be back out on the road again.

Omg!! your brilliant. i just repaired my segway es2. One of the magnet on the brake leaver side was in between the spring. After removing it and glueing it back into its original place. I crossed my fingers and turned it on!! The Error code was gone!! Thank you very much for this video.

This worked, I had a bag hanging over the handlebars and it was occasionally putting some pressure onto the e-brake and it ended up with a error 15. I followed these directions (including previous video) step by step and it worked out! one of the magnets was stuck to the spring, just like ya said! good video! 420 miles on my ES1

Man I love the 9bot it's a good product glad to see you guys put videos up like this

thank you, you just saved me 30$ was considering buying a new throttle

FYI...paid $178 last year for this exact fix...thank you!!!

Thanks man this has been so helpful!

Thank you friend, keep up the great work!!!

This just got my Segway scooter back working again so a big thank you from me

It's probably worthwhile to add that sometimes you will crack open the throttle and/or brake and see nothing wrong. The magnets are absolutely glued to where they're supposed to be and the springs appear to be completely in position so these just can't be the problem. On the plus side, after all that work, I put it all back together and my Code 15 disappeared. Maybe the wiring harnesses are a tad loose and this reconnects them. As I've seen posted elsewhere --- and well-engineered things should not work this way --- sometimes you can bounce the scooter up and down and the codes disappear. That happened the month before when I had a Code 14. Accidentally let the scooter fall sideways onto the garage floor, and, again, the problem magically disappeared.

Riding my es2 last night when I hit a kerb and suddenly I get the error 14 message. Luckily i was just near my home when it happens.. Followed your instruction to take it apart and put it back and it works.. Werid thing though, magnets are in place but I am not sure about the springs.. Anyway, it is working now and thanks for saving me.. 😂

thank you! i fixed the 15 error after following your instructions here. 🤗

This is first time youtube video helped me. Thanks a lot.

What an awesome video. Big Thanks!

You Rock! Keep it up, if you are ever in Boston, let's scoot the historical tour!

You guys rock thanks for the video

tnx, i have fixed my new ninebot es2 with error 14

Thanks a lot. Just fixed!

Thanks for the tutorial. This fixed it, the magnet came loose causing the E14.

Thank you, works for my error 14

Hi guys, thanks for your help with this video I have fixed my problem (error 14). But since this fix my es2 turn off even when the battery is full and requires to be plugged again to restart. Do you have a solution please?

This happened to me last night greatful for the vid

Thank you! This worked

Great explanation thank you

How do you fix error 15 on Ninebot MAX?

Thank you. Very useful. Can you can please do a video on how to stop the rattling on those assemblies. Or reply with what to check and fix would be appreciated

thanks - the push in and down part was really hard and I just pushed in and a little plastic broke up from another place not the 4 things but from inside - but still works and the speeder works fine now - I think the spring was loose and just putting in place made it work again

Thanks a lot, dude! I almost disassembly my weel ...I was hit by a car and my acceleration throttle was pushed up forcedly.

Thanks! Fixed my ES2. How humiliating to be left with a beeping scooter when I wanted to head home - had to walk. I was just downtown to get a kebab but on the way down it started acting strange. Not breaking just letting go of throttle. Had I only not turned if off while waiting for my food I could probably have made it home without walking. Bad design. Or at least bad gluing. Inexcusable for such an expensive toy.

Hi, I have had problems with my sons scooter ES 4 it just would not switch on one morning so I ordered the round board with switch and speed etc but it was still the same dead, then I ordered the main board, fitted that and now it switches on OK but it had error 14 . I took the throttle apart as per your video but the magnets were OK. I put it back together again now error 14 has gone but I get error 49. I am lost and need some help if you can. Regards Gary

Thank you for fix my Error 14 after hard landing

Thank YOU!

Do you offer any support in troubleshooting? It had no throttle response from out of box but we flashed it and it worked well until it was wrecked by my daughter. I had to take steering apart and re center wheel and found the 4 pin wires frayed and severed. I soldered and heat shrinked all then reassembled, and all works but throttle even with re flash... less than 3 week old.

amazing!

Hi there Is it possible to change the throttle whit an on-off button? (my throttle has break up)

thanks for the video

Whats the previous videos name or link to it. Please and thank you.

Hello i have a ninebot es2. de front whell is block but i have not fail or something wrong on the display. can you help me please?

Hello bro i need fix my scooter i ma having problem with speed i am run 13 but i have extra baterry should be 18 miles so tell me what part i have to chance

Thanks!!!!

Hi👋, have you any idea why i got rattling sound from throttle when i reach max speed on new ninebot f30e? When i go uphill rattling sound dissapears...

HI, well done for the video, I have replaced both throttle and brake and still giving me error 14, you have idea why ?

I am having a front wheel breaking issue. Can you help with tips on how to repair ES1 kickscooter. My ES1 electric brake has been locking on its own at times while riding also while I walk with it. As I ride and press the electric brake, it causes the wheel to lock hard and forces me forward. I purchased my ES1 at Best Buy in 2/17/2018. I do have the extended warranty with Best Buy, but their process is by giving a new ES1 in exchange or pick another product. I did not want to get another brand available but decided against it. I am a big fan of Segway ES1 and may have caused a trend in my neighborhood due to the item being out of stock. I am still under the 180 days manufacturers limited warranty. Looking forward to your reply, Good Day Alex Munoz

Will this fix work for the Max model?

Sick video dude , thanks allot. After I pulled it apart I found that the hall sensor has actually broken due to a stack. Anyhow I'm ordering a new throttle but was wondering if I could use the brake sensor in place as it's a few weeks for delivery. I was going to switch connectors to suit but then I'm thinking that the control unit may pick up that the brake has been disconnected so .. do you know whether that will stop it from working or I need to bridge the brake sensor ? Cheers Shane

Thank you will try this for my Error 14. My 2nd parralel throttle is a Chinese one and get a Lot of presure. good explanation what could Happen INSIDE THX

Where can I get Hiboy parts? I tried looking online for a brake but am having no sucess

If you don't mind can you help me I have problems in my sporco scooter Is hand holder speed

Where is the first video at?

I just got my Ninebot ES2 with an extended battery yesterday, and after some use I randomly received error code 42 "External battery communication error". It seems to occur entirely at random when the scooter is not in motion, and appears to temporarily stop when the external battery is pushed/bumped into. The screws were tightened properly during installation and as described in the manual. I guess the only thing I can on my own is attempting to remove the rubber stoppers (hiding the screws) and attempting to tighten even more, although I believe it won't resolve the issue. I'd like to look know what I may potentially do myself before returning the scooter, as I'd have to send it and be without one for quite some time when I do. I also wonder how to remove the rubber stoppers without damaging them, if possible. Any advice would be much appreciated.

Hello I had error 14 so I put new brake and throttle on and now it’s error 15??? Any thoughts

I got an error on my ninebot max i think the problem is the break it stop beeping when im pressing the break. And it runs while im pressing the break. Can you help me??

Wow. This happen to my ninebot segway just today.. the maximum of my speed now is 16 supposed to be it 28... i tried the road downhill. And its work.. ! You just have to find way to run fast.. and its work.. 😍😍 i was worried..

Any info on how to fix code 11, trying to fix it before i go for an inverter.

I have a brand new Ninebot max with caliper type brakes (ie i don't have a throttle lever type brake). I am getting error code 15 "brake Hall sensor error" .Anyone know how to fix? I tried the Reboot procedures and they did not work.

HOW do you fix error code 34 for my scooter es2

Very clear and concise. Thank you

On the segway ES2 what is error 10? I cannot find it anywhere??

Does this work for es4?

whats is the number hall lineer sensor?

I'm having to repair the throttle sensor for my scooter, but have no clue where the red, green, and black wires go that connect inside the sensor of the throttle body housing. I've been looking like the last hour and still haven't found the answer.

I tried to fix my code 14 with your method but the magnets are at the right place and the code is still there, any idea o what i should do ?

well this work for xiaomi m365 as wel ?

Bro, when I connect meter cable to controller not on the bike only charging show on display and no any thing work. After connecting the meter cable, controller is given RED light permanently, if I can performed hard reset, then green led blinked one long and 4 short blinked with beep. That's Error 14?

kids have twisted the steering colum round until the wires snapped ive had it to bits and got power but red light on clock. how to reset it

I get the error trottle hall sensor error. I opened up the trottle and the magnets were in place so I put it back together and I still get the error. What to do next?

i have looked and looked for the disasembly video you mention at beginning of the video i have e2 and error 15

** ERROR 11** Hi. I can't find any posts online anywhere on my issue. My ES4 (purchased Aug 2019) randomly doesn't function (error 11 - "Motor A phase current sampling error, please check master control"). Happened a few times earlier, but later could boot as normal whenever it feels like it. When error occurs, it doesn't power up, it doesn't charge, leds flashing and beeping. Tried throttle+brake+powering on/off several times. Not sure if it needs a motherboard replacement as it sometimes works as normal. I have the ES2 with external battery installed. Can't rely on this thing taking me there and back anymore, any advice greatly appreciated!!

I have I think an es1? Maybe gen2? I dunno but anyways, got it all apart and my magnets are rock solid in there spot. I tried using other magnets and no dice. Still beeping 14. I’m going to try ordering a new throttle.

Good day sir. Can you make a tutorial video on how to fix ERROR 1 on KUGOO M2 PRO very much appreciated. God bless

Hi Please help me if you can My Es4 have same speed in red and white mode.From 30km/h in red mode go to 21km/h. Where is error?

I’m currently working on this but I almost broke my thumb trying to push out that plastic thing

I had the same 14 error on Xiaomi M365 pro and bought a new Trottle, but after seing this video I tried your method. I solved the issue when seing inside that those 2 magnets were in place . I used 2 others magnets to "recharge " the throttle for 30 seconds . Surprise !!!! The old throttle worked . So it was a blind try and worked . Now I have 2 throttles good to go . Perhaps those magnets lose somehow the proprieties , I don,t know . My magnets were in the right places when I got the error .

Good

The front electric brake on my Es2 has absolutely no function, it doesn't even switch off the cruise control, but no error message. Where should I start to rectify the error?

I'm getting error 15 on my ES1. Do I disassemble the left (brake) handlebar? Also, where can I find a list of the error codes?

0:50 to 1:00 is impossible. Any advice that could help, please??

Thxu

I have an error 18. Cant find support anywhere so hoping for the best from RU-vid. 18 is a motor hub, control board, or cable error. The scooter shakes and vibrates violently and loudly when the throttle is activated. Pulling the control board I see no immediate signs or smell of burn or overheat. The cables seem to have been seated well and also no immediate sign of burn or extra heat in them either. Has anyone else experienced this violent, un-driveable vibration, and if so would the problem be located in the motor hub or on the control board? Thanks in advance.

magnets are both on their place but scooter still shows error 10/14

Mine is not the magnet issue. The tiny piece between the spring and the cylinder (near the screw) broke. There are three metal pieces sticking out of it.... I'm thinking of soldering those metal back together. P.S. After making sure I watched the previous video, I accidentally removed the throttle when instead the break. I forgot.

Great video but stuck sliding the unit out at 4,really stuck in there, any pointers?

I have this error but when I dissasembled the brake, the two magnets are at the holes correctly.

Thanks so much that totally worked except now the throttle is hard to hold down. and when it comes down it gets stuck

Hey! I'm having a really weird issue where in the middle of riding, the motor shuts down, (not the scooter) and gives me the error 15. Then, I just hit the accelerator again and the scooter is back to normal. There is nothing like this online, can someone help me?

My new Ninebot Max starting giving me error 15. Wouldn't move. I did something a lot simpler to solve it: Remove the top cover piece, loosen the circuit board and make sure the wires underneath are not touching, they should all hang loose with no tension. Then screw back on the circuit board and cover. That solved the problem.

I have the new es4 will this video work for that too? Many thanks

Thank you for this amazing video! I got to fix the error 14. Unfortunately, now my scooter doesn’t reach the max speed. It goes to 6 mph max instead of 14 mph. Please help!!! Thank you..

Hello, I opened my throttle but the magnets was in the right position, they didn't move from their place. So, what could be the problem with my throttle. The error is the number 14. Thanks!

your a fucking legend for this bro thank you

Did the manufacturer ever redesign this to make it more reliable? Seems like there's something they could have figured out to retain those magnets so they wouldn't get jarred loose with an impact.

can we have one for xiaomi 365?

Do I need to disassemble the handlebar is I am able to take off the throttle and put on new one without it to fix error 14?

I replaced them with new ones, but it still shows this error. Can someone help?

What the name of 1 vid

Does the scooter cut out then won't turn back on I think this is what's wrong with mine

Hey Guys. Thanks big time for the video. One of my magnets was loose. Glued the magnets in place... now I have another issue. On starting, I get error 14, but it goes away if I hit the throttle. But when I (try to) ride, I get some crazy issues. I kick off, hit the throttle, and the motor runs full acceleration even when I let go of the throttle. I tested it by kicking off, jumping off scooter, engaging motor, and taking hands off the throttle, and the motor goes full acceleration. Do you have any idea what would cause this? Thanks guys

By the way what does this error 14 really mean plz help I'm confused

This one wont work on me i already follow about the magnet and still it gives error 15.