In this IoT internet of things project, I have shown how to make the ESP32 CAM PIR motion sensor camera with light using the Telegram app. you can also monitor the temperature reading from DHT11 and control the PIR sensor through the internet.
To try out the FREE trial version of Altium, click here - www.altium.com/yt/techstudycell
Download the PCB Layout for the ESP32 CAM projects:
iotcircuithub.com/wp-content/...
Download the Code and PCB Gerber file for the PIR motion sensor camera from the following article:
iotcircuithub.com/esp32cam-pi...
Previous Video:
ESP32CAM Telegram Door Lock: • Smart WiFi Door Lock w...
PIR Sensor Tutorial: • How PIR Sensor Works a...
For this IoT-based ESP32 CAM project, You don't have to connect with the same WiFi network. If the ESP32-CAM is connected to WiFi, you can get the photos from anywhere in the world on Telegram App.
During this video, I made the circuit on zero PCB using the PCB layout, and also shared the PIR motion activated camera circuit and source code.
During the ESP32-CAM tutorial video, I covered the following topics:
00:53 Quick demo on IoT based motion camera using ESP32CAM.
02:10 Required components for this ESP32-CAM IoT project.
02:16 Circuit diagram of the ESP32 CAM PIR motion camera.
03:29 How to make the IoT-based motion camera on Zero PCB.
04:58 How to set up Telegram, create BOT, & generate the token.
06:09 Source code for the ESP32CAM motion detector camera.
07:37 PIR motion sensor security camera connection.
Required components for the non-contact liquid level sensor.
1) ESP32 CAM
2) PIR sensor
3) DHT11 Sensor
4) 220-ohm 0.25watt Resistors - 2 no
5) 1k 0.25watt Resistors - 2 no
6) 1N4007 Diode
7) BC547 NPN Transistor - 2 no
8) LED 5mm - 2no
9) 5V SPDT Relay
10) 2-pin Terminal connectors (2 no)
11) SPDT slide switch
12) AC to DC converter 5M05 5V
13) FTDI232 TTL converter.
Amazon India Affiliate links:
ESP32 CAM: amzn.to/3ITjbsB
PIR sensor: amzn.to/3XzX3aJ
Amazon United States Affiliate links:
ESP32 CAM: amzn.to/3QEB3sO
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Important points:
1. Turn on the switch S1 before programming the ESP32 CAM.
2. After programming turn off S1 and reset the ESP32CAM.
3. If the motion sensor is ON, it will keep on sending photos if PIR detects any motion.
4. ESP32-CAM must be connected with WiFi.
5. You don't have to connect to the same WiFi network to receive photos.
7. You can also add an external antenna with ESP32CAM.
8. Please watch the complete video, otherwise you may face some issues.
**Please take proper safety precautions while working with high voltages.
This IoT-based ESP32 CAM project can be used as an outdoor motion sensor security camera. In the tutorial video, I explained how to create BOT on Telegram to get pictures from ESP32CAM. You can also turn ON and OFF an AC lamp from the Telegram app.
If you face any issues please let me know in the comment section.
#iotprojects #esp32cam #motionsensor
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more projects: iotcircuithub.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
• ESP32 Projects
Latest NodeMCU projects playlist:
• NodeMCU Projects
Arduino Home Automation Projects playlist:
• Arduino Projects
13 янв 2023
