Click for more info and reviews of this CE Smith Trailer Fenders:
www.etrailer.c...
Check out some similar Trailer Fenders options:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the galvanized steel mounting brackets for eight inch or nine inch wide trailer fenders over 13 inch to 15 inch tires, and this is for a quantity of two brackets. Now, these brackets will provide the attachment points to mount your fender to your vehicle, and these are for mounting rounder Jeep style fenders. They are a durable galvanized steel construction, resists rust and corrosion, and the galvanized steel parts are hot dipped in zinc after being stamped, and this creates a coating that's typically three mils to five mils thick, and then this thick all around coating allows galvanized steel products to provide years of use without rusting or corroding. Now, these are a bolt-on installation, they'll attach to the trailer frame and the fender. The mounting hole diameters on these is 3/8 of an inch.
Now, the mounting hardware to install this is sold separately. These parts are made in the USA. Again, it's for a quantity of two fender mounting brackets for one fender. As we mentioned, the application is for eight inch or nine inch wide fenders on single axle trailers, and it's for use with 13 inch, 14 inch, and 15 inch tire sizes. Dimensions on this.
If we go to the width, the overall width on this is gonna be right at 6 1/2 inches, and the overall height is gonna be right at 8 1/4 inches tall. But that should do it for the review on the galvanized steel mounting brackets for the eight inch or nine inch wide trailer fenders over 13 inch to 15 inch tires..
20 авг 2024