Тёмный

EVA FOAM! The hull truth! "Tips and Tricks for Professional Install" 

TRICKED TINS
Подписаться 16 тыс.
Просмотров 41 тыс.
50% 1

I havent really done a turf install how-to video yet so I wanted to share some info on what turf im using, and how I install it! I hope this video helps you with your installation! Check the time marks for navigation in the video.
Cheapest place to buy turf👇
www.fabricsdirect4you.com
Support me and rep trickedtins merch 👇
www.trickedtins.net
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/
Tricked Tins Crew 👇
DruYoder with Yoder boats.
www.Facebook.com/yoderboats
yoderboats?igsh...
Casey Bass With C bass welding.
/ @cbasswelding
/ cbasswelding
Simeon Terrell aka Sham4reel
/ @sham4reel764
sham4reel?igshi...
0:00 What is EVA Foam
5:38 Where to start 1st sheet
12:00 cuting EVA
13:30 cutting around hatches
16:00 hiding seams
17:55 drop-down floor
19:15 sheet management
25:00 finished product

Хобби

Опубликовано:

 

15 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@angeloc3842
@angeloc3842 4 дня назад
As a craftsman, I can tell you that looks great. 👍🏼 nice work
@TRICKEDTINS
@TRICKEDTINS День назад
Thanks brotha
@randallmiller572
@randallmiller572 9 месяцев назад
You do nice work dude!! Really appreciate your patience and know how!👊🏼
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thanks man. Glad to help
@christinerogers5331
@christinerogers5331 9 месяцев назад
Really nice turf job, Matt, you did an awesome job of keeping the lines straight from bow to stern and your trim work is impeccable!
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thank you. I take pride in my work!
@joec33
@joec33 2 месяца назад
Nice job, it looks great. I'm buying that gator camo . Thanks for taking the time to instruct
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
Awesome good luck man. Thank you for watching
@CurrituckF150
@CurrituckF150 9 месяцев назад
Great video, Matt and right on time, too. I'll be putting eva foam in my Jon boat after i get painted and back together.I just got a hatch from you this week. Excellent craftsmanship 👍 Thanks, Matt
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Sweet brotha! Appreciate the support!
@BernPisarcikJr
@BernPisarcikJr 6 месяцев назад
Dude, that is sweet! The lights rock also. Good work! I’ve been looking at that color pattern for my 2019 1448. I prolly should de-foam the rear bench before the EVA install.
@TRICKEDTINS
@TRICKEDTINS 6 месяцев назад
Thanks brotha! Eva foam is definitely the final step.
@GShore
@GShore 2 месяца назад
Great info, bro! Thanks for sharing!
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
Thanks brotha!
@jeffjones4006
@jeffjones4006 4 месяца назад
You definitely know what you’re doing great work very informative video.
@TRICKEDTINS
@TRICKEDTINS 4 месяца назад
Thanks brotha
@rodconner9079
@rodconner9079 9 месяцев назад
Oh my, have mercy!!! The amount of work and the time just to put this stuff in ........ Hat's off to ya @TrickedTins WOW!!! Be Safe
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Well worth it in the end! Thanks Rod!
@rodconner9079
@rodconner9079 9 месяцев назад
@@TRICKEDTINS Oh, I agree -- but my my my ya gotta be dedicated!!! : ) Be Safe
@robertmartin265
@robertmartin265 3 месяца назад
Awesome. Ty for sharing
@TRICKEDTINS
@TRICKEDTINS 3 месяца назад
Yessir
@popsfishing
@popsfishing Месяц назад
wow! That looks awesome!
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Thanks brotha
@robertdavidson4421
@robertdavidson4421 9 месяцев назад
Looks good!!! I was literally going to email you today to ask how many sheets of HydroTurf you would recommend to do my Grizzly 1648? I don’t have the extended deck like you’ve customized there but I just want to make my boat not so hot when I’m on the water with my family. Just looking to turf the deck, bottom floor and the back deck.
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Probably 4
@NikiBoat
@NikiBoat Месяц назад
Hi! Hello, great video! Please advise me where I can order such cool colors of Eva foam?
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Thanks. Fabricsdirect4you.com
@joshwalker1441
@joshwalker1441 9 месяцев назад
Nice work!!
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thanks brotha!
@stretch91068
@stretch91068 9 месяцев назад
SICK!!!
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thanks brotha
@carlitossierras3808
@carlitossierras3808 Месяц назад
Hello friend, I congratulate you for your explanation, I want to start that type of business in Puerto Rico, I already have a cnc router, I ask you, is there a website where I can buy the templates of different boats where I can buy the machine to make the templates?
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Thanks the machine is called a prodium. They are expensive $35k. You might be able to get some cad files from someone but i really dont know man. Goodluck
@theINQBS
@theINQBS 9 месяцев назад
Brother here's a huge insider tip for your blades… Buy some Rapid Remover and pour a little on a shop towel and just literally press the dampened shop towel on your blade, wait 5 seconds and wipe it CLEAN!!!!!! That's the professional remover for venial wrap. When you strip a vehicle you will inevitably leave glue in many ares because it's just the nature of the beast. As well, to remove decking or ANYTHING with a sticky back, including 3M (which is the best glue on the market) you first peel a little bit and spray some rapid remover, let it sit for 15 minutes and peel it off! Of course GRAVITY is your friend, so you want to have whatever you're removing at a bit of an incline so that as you peel, the rapid remover slides down as far as it can stretch, at which point you give another spray, rinse and repeat. No more scraping and struggling, sore fingers or anything!… YOU'RE WELCOME!!!
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thanks. Ill check it out!
@toupsclassroomtoupsclassro9557
wondering why the side was not straight from factory? Superior job really nice
@TRICKEDTINS
@TRICKEDTINS 2 дня назад
Lol. Buit 100s never seen one that was perfect
@andbear2
@andbear2 Месяц назад
Great job brother, first time seeing your work. How much do you charge for a project like this?
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Thanks brotha! They vary depending on the build. Hit me up on IG, FB, or email professionalwelding@gmail.com
@andbear2
@andbear2 Месяц назад
I live at lake Pleasant in Az and have a friend that wants me to do some of this stuff and your video is a great resource.
@mattlord2906
@mattlord2906 2 месяца назад
I would like to integrate the deck lids with a foam sealing edge for cleaner look. Or run a bead of rubber around the lid. Not sure yet
@TRICKEDTINS
@TRICKEDTINS Месяц назад
I've thought about it, but with the compression locks and drain tubes, they channel water pretty well.
@mattlord2906
@mattlord2906 Месяц назад
@TRICKEDTINS I just dug and blasted and pulled lead weights out of the drain ports. Stuff was plugged
@haroldmedley1998
@haroldmedley1998 5 месяцев назад
Would this replace my pontoon carpet and last? Slippery when wet? Got grandkids!
@TRICKEDTINS
@TRICKEDTINS 5 месяцев назад
Yes you could definitely put this in your pontoon. It is made for boats and water it's not going to be slippery. It comes with lots of different textures
@CruzN4Fish
@CruzN4Fish 3 месяца назад
what is your recommendation when removing old carpet. Carpet on my boat it rolls into the hatch lids. once removed now I will have a gap. When installing the foam should I roll the edges?
@TRICKEDTINS
@TRICKEDTINS 3 месяца назад
I hate carpet lol. To do it right you need new lids. If you give me measurements i can make them.
@SmithFishingAdventures
@SmithFishingAdventures 9 месяцев назад
I’m looking to redo my 1999 bass tracker pro team 165 with the red camo from tiny boat nation or the snow camo from Amazon… how many sheets do you recommend for the whole boat including inside hatches and under the seats ? They’re 94x43.5 sheets
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
I would save some money and buy your turf from Fabricsdirect4you.com TBN is overpriced and Amazon is cheap. Probably 4 sheets
@SmithFishingAdventures
@SmithFishingAdventures 9 месяцев назад
@@TRICKEDTINS checking it out now! Definitely wish I could get it to ya! I’m going all aluminum replacing the wood floor and front deck with aluminum… sold my 2 stroke engine and repowering the whole boat with a 4 stroke tohatsu engine
@4ReelAnglin
@4ReelAnglin 7 месяцев назад
I got a question about installing Hydro Turf. Is temperature and humidity a big deal when installing? Thanks!
@TRICKEDTINS
@TRICKEDTINS 7 месяцев назад
Yes and yes. They both make a difference
@4ReelAnglin
@4ReelAnglin 7 месяцев назад
@@TRICKEDTINS gotcha, thanks! I installed it at about 65 degrees.
@goodmanfishing
@goodmanfishing 2 дня назад
Nice job on this, but those cut lines look like such a pain!
@TRICKEDTINS
@TRICKEDTINS День назад
Definitely make it harder lol
@codygadd5022
@codygadd5022 Месяц назад
Where are u located? Do you do customer boats locally?
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Virginia Beach. Yeah everyday lol.
@DanVaughn-je6oh
@DanVaughn-je6oh 3 месяца назад
Wish i had done my boat in foam i already did carpet!!
@TRICKEDTINS
@TRICKEDTINS 3 месяца назад
Carpet is cool but its a bitch to install. I only use eva foam.
@Chris_palmer1980
@Chris_palmer1980 4 месяца назад
What about installing on wood decking?
@TRICKEDTINS
@TRICKEDTINS 4 месяца назад
Made for installation on metal, plastic, or fiberglass. You might be able to install it on wood if you seal it to where it is a smooth finish, but I dont recommend it
@Chris_palmer1980
@Chris_palmer1980 4 месяца назад
Thanks
@speedbuggy4095
@speedbuggy4095 2 месяца назад
Do you do work near west KY or do you know some one who does
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
Unfortunately not.
@speedbuggy4095
@speedbuggy4095 2 месяца назад
@@TRICKEDTINS I have a old Grumman and would love to get more deck space on it
@Huskycodbvvv
@Huskycodbvvv 9 месяцев назад
How do i get a boat built by you?
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Professionalwelding@gmail.com
@Huskycodbvvv
@Huskycodbvvv 9 месяцев назад
Thank you
@computerguy1724
@computerguy1724 Месяц назад
Choose your color wisely. Terminal tackle gets lost easily.
@TRICKEDTINS
@TRICKEDTINS Месяц назад
Facts
@kodylemire2986
@kodylemire2986 2 месяца назад
So are the factory edges not straight? Also they recommend in the directions if you’re putting two seems together to pre glue them together to avoid any gaps. But I see you didn’t do that so am I wasting my time? Lol
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
No, the factory edges are not square! Idk about gluing the seams. I've never heard that.
@kodylemire2986
@kodylemire2986 2 месяца назад
@@TRICKEDTINS thanks for responding!My bow deck has no hatches BUT I’m on a budget so I bought two 23x 94 panels. My bow deck is 50x63. So my plan is to have 3 seams. I will cut the two panels into 50” lengths and then the extra 44”x26” piece I’ll use to fill in the width of the deck that I didn’t cover. Hopefully 3 seams won’t be to noticeable. Lmao
@camyota
@camyota 2 месяца назад
Whatever you do. Cover your boat after installing this stuff! 1 year of being in the elements and it turns into the marshmallows from lucky charms.
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
Every boat should be covered imo
@CD38325
@CD38325 2 месяца назад
@@TRICKEDTINS100%
@pokekorey
@pokekorey 2 месяца назад
Wow, now I know why people pay to get it digitally scanned and custom cut, this is a lot of work.
@TRICKEDTINS
@TRICKEDTINS 2 месяца назад
Tell me about it lol
@mattlord2906
@mattlord2906 2 месяца назад
Is that for them to install, or do they cut it for DIY?
@user-es6rb5vj4u
@user-es6rb5vj4u 9 месяцев назад
i want one of ur boats so bad
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Lmk brotha
@chrispeterson1247
@chrispeterson1247 5 месяцев назад
Its so over priced
@TRICKEDTINS
@TRICKEDTINS 5 месяцев назад
Not really. I mean you get what you pay for. I can hook you up lmk.
@JACKSPOV
@JACKSPOV 3 месяца назад
@@TRICKEDTINShow much do I need for a 14ft jon boat
@marklaramie7393
@marklaramie7393 Месяц назад
You do a great job man,, nice work, and taking the time to film/edit, very skilfully done start to finish
Далее
MacBook Air Японский Прикол!
00:42
Просмотров 191 тыс.
Кеды из СССР «Два Мяча»
00:58
Просмотров 556 тыс.
EVA Foam 101: everything you need to know
12:21
Просмотров 14 тыс.
DIY EVA FOAM Inside a Boat | Full Install
27:38
Просмотров 14 тыс.
Foam Filling the hull - Pros and Cons!
12:04
Просмотров 26 тыс.
Проверил, как вам?
0:57
Просмотров 7 млн
Тайна голубого озера😱
0:35
Просмотров 9 млн
World’s Deadliest Obstacle Course!
28:25
Просмотров 48 млн