Тёмный

Full DIY Guide to EVA FOAM a Boat | Everything You Need to Know 

Anthony Jones
Подписаться 55 тыс.
Просмотров 208 тыс.
50% 1

Full Guide to EVA FOAM a Boat
Grey w light blue foam used in video:
tbnation.net/collections/deck...
Flat black eva foam used in video:
tbnation.net/products/hydro-t...
Aluminum hatch lids used in boat:
tbnation.net/products/dry-sto...
Latches used in lids:
amzn.to/3LWdmMe
Use code "BRIGADE" at
tbnation.net/
at checkout, save 5% off your entire purchase!!!
⚡️⚡️⚡️
Use code "BRIGADE" at checkout to save 10% off your entire order from 6th Sense.
6thsensefishing.com/
"OH" Braid Swim Jigs here:
6thsensefishing.com/collectio...
At WaterLand Fishing Optics use code "BRIGADE" at checkout for 15% off your order.
www.waterlandco.com/
⚡️
VIDEO CHAPTERS:
0:00- CH 1- INTRO
4:27- CH 2- WHAT IS EVA FOAM AND WHY I USE IT
5:51- CH 3- EVA FOAM VS CARPET (PROS)
6:44- - LIQUID TEST ON FOAM
7:32- CH 4- EVA FOAM VS CARPET (CONS)
8:41- CH 5- TOOLS AND MATERIALS
11:42- CH 6- DETERMINING FOAM DIRECTION/ORIENTATION
13:02- CH 7- FOAM DIMENSIONS AND PREP
13:29- CH 8- FOAM LAYOUT (BACK DECK)
16:31- CH 9- EVA FOAM INSTALL BACK DECK
18:47- CH 10- CUTTING AROUND LIDS AND HINGES
21:49- CH 11- DECK EDGES
23:56- CH 12a- EVA FOAM INSTALL FRONT DECK
30:55- CH 12b- FOAM BREAKS/ BUTT JOINTS
34:46- CH 13- EVA FOAM INSTALL COCKPIT FLOOR
37:12- CH 14- COCKPIT WALLS AND TRIM (BLACK)
42:52- CH15- CUTTING AROUND LATCH
43:25- CH16- FINISHED BOAT
⚡️
Welcome back to another step by step tutorial video! In this video I will cover everything eva foam. This is a longer video but I've listed thechapters in detail above so you can skip to where you wantat your convenience!
I'll cover common asked questions like "what is eva foam?". I'll go over what it is, made of, what brands and products I use in my jon boat builds, the differences in foam textures and color variations, problems that can occur, as well as the pros and cons of eva foam. I cover the topic of eva foam vs bass boat carpet. I do a liquid test on the eva foam to demonstrate is closed cell construction. I cover the durability and ease of cleaning of eva foam.
Next, I go overall the tools and materials needed to do a diy eva foam installation. Then I show you step by step the entire installation process, leaving no stone left unturned! I show prep, how to measure and cut, layout turf breaks and spans, templating, where to cut and butt seams, how to cut around lids, hinges, and edges, and much much more!
Of course I show some tips and small tricks along the way as well as the finished project! Hopefully this full eva foam guide is of use as it's pretty much everything I know! Thanks for watching
👇
FIND ME ON SOCIAL MEDIA-
Tik Tok-
brigadeboats
Instagram: invitescon...
or adubjones
Facebook- / brigade-boats-10071137...

Опубликовано:

 

17 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 149   
@DoktarEvil
@DoktarEvil 10 месяцев назад
This guy pays attention to the details - for example how turf shades could look if cuts aren't aligned or how he painted the edges in black to make them less noticeable etc. Anthony doesn't cut corners, cares about the quality like it's his own boat - gentlemen, work like this in whatever field you're in and you WILL get recognition 100%.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 10 месяцев назад
Much appreciated man. I take pride in my work and details and am glad when it's noticed 👊
@bigblock67camaro
@bigblock67camaro 8 месяцев назад
He didn’t “cut corners”? How’d he get the corners cut then?😂
@123jpalmer987
@123jpalmer987 10 месяцев назад
The tip on “grain pattern” of the foam is worth its weight in gold. Incredible detail work man!!!
@timlee61524
@timlee61524 Год назад
Not a cleaner install video on RU-vid. Flawless work cousin!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Thanks so much man 👊
@anthonykontos7931
@anthonykontos7931 10 месяцев назад
@@AnthonyJonesBrigadeBoats just came across this . Would love to implement this in a build I was thinking about doing.
@batcavetheater07
@batcavetheater07 11 месяцев назад
Just wanted to say that this is a fantastic video!! Thanks so much for being so detailed and this will make my install go ( hopefully) smooth.
@choimdachoim9491
@choimdachoim9491 8 месяцев назад
Great job! I'm wondering if an adhesive applied at all butt-joint and blue-line joint areas would help prevent water seeping underneath the eva.
@williammyers6766
@williammyers6766 4 месяца назад
You are an amazing craftsman. What a beautiful job!!!
@scarface-39
@scarface-39 6 месяцев назад
Top notch install! Awesome job!!
@Hunter-kz6os
@Hunter-kz6os 11 месяцев назад
Beautiful work. I’m planning on getting a bass tracker and hopefully I can build it close to this.
@hubetubetv380
@hubetubetv380 Год назад
Incredible attention to detail on this Mr. Jones!💪💯🤩😎
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Thanks cuz!!!
@TheFfmike317
@TheFfmike317 10 месяцев назад
You do outstanding work Cousin!!!
@sebastian2fn
@sebastian2fn 11 месяцев назад
A master at your craft brother, absolutely awesome video, amazing tips in here 👍
@crossroadsheavener7599
@crossroadsheavener7599 8 месяцев назад
If applying EVA foam to fiberglass resin plywood (like your video), should you use additional adhesive like 3M, to the wood and/or SS staples on the edges? And, cut the plywood to the exact width of the foam, mines just shy of 24". Thanks Cuz!
@revvin871
@revvin871 11 месяцев назад
Outstanding video! Boat looks great! I'm about to do my G3 decks with the Hydroturf and watching you do yours answered all my questions!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Awesome, thank you!
@jaychristensen8231
@jaychristensen8231 2 месяца назад
Does that material stick to decking amd or fiberboard/lake board(whatever its called)?
@henryclark5486
@henryclark5486 11 месяцев назад
Man, that is kick Butt nice 👌 👍. I'm thinking about doing this to my 18.1 Tracker boat.
@dawsonstanley8558
@dawsonstanley8558 Год назад
Awesome work! What would you do if there was a big gap between your cock pit floor and a side panel? Run the side panel turf into the gap or vice versa?
@cajunnathan4586
@cajunnathan4586 Год назад
Thank You for the Excellent instructions & Details!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Thanks for watching!
@robertwelsh6033
@robertwelsh6033 9 месяцев назад
I'm restoring a 1982 fisher 16ft mod v. Will the turf stick to older textured aluminum if it is preped properly?
@roberthalvorsen9392
@roberthalvorsen9392 Год назад
Everything you do is awesome. Good video to watch and learn!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Very much appreciated. Thanks for watching
@johncarpenetti839
@johncarpenetti839 Год назад
great video. thanks for taking the time to show the steps. definitely makes it less intimidating.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
It was a bear to film and edit but comments like yours makes it worth it. Thank you
@Veemack21
@Veemack21 7 месяцев назад
Great install
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
Thanks!
@boyd241985
@boyd241985 7 месяцев назад
looking to do my 17 deep V do you happen to have any videos of doing it over wood?
@steveadams8487
@steveadams8487 9 месяцев назад
I’m replacing carpet on my 2004 tracker PT 175, and what can I do about the gaps you mentioned between the lid and deck or boxes left by the carpet being rolled over the edges of the lids? Can I use a rubberized coating on exposed aluminum to deaden noise and cover the aluminum? PLEASE ADVISE???
@tomoconnell8575
@tomoconnell8575 Месяц назад
Great video.. What label printer do you have for the switch labels?
@regkershaw
@regkershaw Год назад
Would have been nice to see the full floor fit out . The evaluation looks great
@bradybroussard9047
@bradybroussard9047 8 месяцев назад
Could this be used on the floor of a work truck? I'm familiar with EVA foam but what I've used isn't that tough. Would this product be tough enough for a work truck floor?
@straightuptreedogs6649
@straightuptreedogs6649 Год назад
Thank you so much for the video!!
@markc2036
@markc2036 Месяц назад
Great job, great video! What year is that boat? I've got a 14ft and a 10ft that I'm thinking about putting that in
@daffyduck9901
@daffyduck9901 9 месяцев назад
Great video, a little tip on using the standard utility knife for long cross cuts or rip cut take a pair of pliers and snap a 1/8 to 1/4 in of the tip of the blade off. The blade is still brand new and ultrasharp it just allows it to cut straighter without the tip of the blade flexing and wandering off your line. You also can keep snapping It off a few times so you don't have to replace blades as often. I've been using this method for decades.👍
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 9 месяцев назад
Thank you, ill try that!
@MarkCartret
@MarkCartret 6 месяцев назад
Excellent presentation. You sold me!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 6 месяцев назад
Awesome. Thanks for checking it out!
@ZombieDropBear01
@ZombieDropBear01 Год назад
Excellent work as always 👍
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
I appreciate that man 👊
@mmanut
@mmanut 10 месяцев назад
NEW SUBSCRIBER, NEVER SEEN A BETTER JOB‼️ ABSOLUTELY BEAUTIFUL JOB ‼️ Vinny 🇺🇸
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 10 месяцев назад
Thanks so much for following along man 👊
@jayk5549
@jayk5549 7 месяцев назад
Excellent video. Very helpful. Thank you
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
Thanks man! Glad it helped!
@hunterwhittaker9291
@hunterwhittaker9291 10 месяцев назад
Very underrated video.
@jameslovelace8958
@jameslovelace8958 9 месяцев назад
What do you charge to do a boat? I’m totally disabled and not able to do this. I have a 2023 Tracker Pro Team 175 TF that my wife wanted the vinyl floor. Well 5 months in she figured out that stuff gets really hot and you can’t fish bare footed on it. I’d love to get the EVA foam put down.
@scotteg9265
@scotteg9265 Год назад
This turned out so sick!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
much appreciated man..very clean
@steveadams8487
@steveadams8487 9 месяцев назад
QUESTION? I have a 2004 tracker PT175, and want to know what to do about the gaps between the compartment lids when carpet is removed. Lids make noise. ANY HELP APPRECIATED!!!
@chriswilson7110
@chriswilson7110 Год назад
You do good work
@danfabisac
@danfabisac 11 месяцев назад
Very good work
@hoists1829
@hoists1829 11 месяцев назад
Awesome video👍👍👍👍
@jandelahoussaye9834
@jandelahoussaye9834 11 месяцев назад
Did you screw down are rivet the aluminum decking and all?if so can you please send me a link of what I need to deck my boat?
@AlrightThanks
@AlrightThanks 7 месяцев назад
Hi Anthony Jones, really fantastic video. Will be very helpful if you could help answer a few questions: 1. Is it okey to work with this material in 50-degree weather? I am sticking this to a painted fiberglass surface. 2. At the 17:05 mark, you have taken the backing peel off material in strips. The sheet I have got has one large piece. What is a way to cut it? 3. Some other videos use additional adhesive spray. Do you think it is a good idea? Thanks
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
1) No. Sea Dek recommends above 60 degree minimum install temperature 2) gently cut the through the backing without cutting the foam. Used razor 3) I have never used additional adhesive, nor does authorized Sea Dek installers. The backing on Sea Dek and Hydroturf is phenominal. If prepped properly and installed in proper temperatures you should have no issues. I never have. Hydroturf does sell an option that has no adhesive backing so you can save some $ per sheet and glue it yourself. I do not recommend this as you will hate your life. No room for error, messy, way more work, and still not as consistent as the backing from the manufacturer. With that said, i can only speak for my experience with what ive installed. I only use genuine sea dek or Hydroturf brands.
@dwightaustin7577
@dwightaustin7577 2 месяца назад
Awesome job sir
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 2 месяца назад
Thank you
@TalkFishTVHawaiianDan
@TalkFishTVHawaiianDan 2 месяца назад
Great video! What’s the name and brand of that 3D scan tool? Super cool!
@darrellryan2337
@darrellryan2337 7 месяцев назад
can you put this stuff on plywood?
@gabedaxe477
@gabedaxe477 11 месяцев назад
Awesome inf thanks
@Flipzco
@Flipzco 9 месяцев назад
100K Brother! Congrats! Killing the game - if your ever in florida, so down to collab!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
Just seeing this man! Thanks so much! Yeah man, I'd love to link up!
@Flipzco
@Flipzco 7 месяцев назад
No worries bro! I always get new ideas brewing everytime i watch your videos man - Such an inspiration! @@AnthonyJonesBrigadeBoats
@jessejames1395
@jessejames1395 10 месяцев назад
So clean
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 10 месяцев назад
much appreciated 👊
@RR-or5ip
@RR-or5ip 3 месяца назад
Dude! Amazing! Love it. My EVA just arrived and I was wondering how in the hell I was going to do this project.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 3 месяца назад
Nice! Well now you know how!
@FranksDIY
@FranksDIY Год назад
great tutorial
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Much appreciated man
@thenextstep5622
@thenextstep5622 11 месяцев назад
Great JOB
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Thanks for watching!
@bryanodonoghue4975
@bryanodonoghue4975 Год назад
You're the man... AJ
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Much appreciated cuz
@wildmanworley
@wildmanworley 11 месяцев назад
will this work on a wood floor pontoon
@frazerwong4652
@frazerwong4652 5 месяцев назад
What a beauty
@tylercarmicheal3756
@tylercarmicheal3756 4 месяца назад
This video makes me realize DIY foam isn’t for me. I know my patience is not a match for my desired look of the finished product. GREAT CONTENT!
@GerardPampani
@GerardPampani Месяц назад
Do you ever spray glue your foam?
@Losquiavo1
@Losquiavo1 10 месяцев назад
Muito bom ficou revestir com EVA, além de bonito as pescarias vão ficar mais confortáveis principalmente em dias com muito sol. Parabéns amigo.
@clayayers9527
@clayayers9527 10 месяцев назад
Can you install this on wood floor pontoon
@mrm4155
@mrm4155 Год назад
Sweet!
@4ReelAnglin
@4ReelAnglin 6 месяцев назад
Howdy Mr. Jones. I have a question about installing Hydro Turf. Is temperature and humidity a big deal when installing HT? Thank you!
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 6 месяцев назад
I install 70 degrees or over for best results. When its colder than that, especially the surface temp of the boat, it obviously doesn't want to stick or bind as well. Not saying you can't do it, I'd just prefer to do it in a warm temp weather or climate controlled environment. Not sure humidity plays a factor so long as the surface is good and dryand cleaned properly.
@4ReelAnglin
@4ReelAnglin 6 месяцев назад
@@AnthonyJonesBrigadeBoats thank you sir!
@bradpitts2853
@bradpitts2853 11 месяцев назад
Can I put sea deck on plywood floor
@garywomack4450
@garywomack4450 Год назад
Well done with excellent results. How many hours do you have invested in that project?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
In the boat or turf job? Honestly it's skewed data because I fulm everything which slows the process down. Hard to say accurately.
@aerojet393
@aerojet393 6 месяцев назад
Damn , nice straight 90 degree vertical cuts , . Noticed the headlamp too
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 6 месяцев назад
Yessir!
@mich5167
@mich5167 11 месяцев назад
What seats are those?
@indianasteelheadandsalmonf7033
What do you use to seal the aluminum deck to the edge? When you were explaining why you cut the way you do you said you already sealed the deck joint. Time was 14:41 for reference.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
I did that in the decking process. For starters, deck mustbe as tight to side walls as you can get it. Then I run a bead of black silicone (exterior grade for construction) down the edge and let that cure for a few days before I do the turf.
@regkershaw
@regkershaw Год назад
Not sure if you do any body panel repairs with dents in the aluminium. Weather your repair and paint. As I have and old boat with dents and have wondered if it can be body filled and painted
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Yes, I show in other build videos body work with fiberglass reinforced body filler before paint jobs
@philh.363
@philh.363 3 месяца назад
What black sealant and sealant around the hatches and flooring seams did you use?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 2 месяца назад
It's just black exterior silicone
@sgreene2036
@sgreene2036 2 месяца назад
I was this 🤏 close to subscribing but then I saw it… a bulldogs logo… 😂 just kidding brother. Good video!
@DanGoodBBQ
@DanGoodBBQ Год назад
Where do you get your underwater line rivets cousin?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
I get closed aluminum rivets from tbnation.net
@timothykidd7193
@timothykidd7193 11 месяцев назад
You make those storage bins?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
If your refto the hatch lids,no. I built the deck, framing, and underneath.
@jackwood6023
@jackwood6023 Год назад
I don't see the gray with blue on @tinyboat, where did you get it.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
sorry, i put the wrong link. Thanks for bringing it to my attention. Here is the right link but it looks as the gray w light blue lines is currently sold out tbnation.net/collections/decking-flooring/products/hydro-turf-2-tone-wide-groove-teak-cut?ref=builtforbattle
@jackwood6023
@jackwood6023 Год назад
Ha, yes can't find it and many others styles all sold out, you guys are making this product to popular 🤣
@johnathanmayo1873
@johnathanmayo1873 11 месяцев назад
Seadek is adamant about leaving gaps for expansion and no but joints. Do you not have problems?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Never had an issue. If anything, no matter how tight I have gotten it, it shrinks if anything at all. Another thing to keep in mind is the temperature you install it in, which determines the expansion and contraction later down the road. Pre cut custom sea dek kits do have gaps by design but they look like they are supposed to be there. Hard to get that result with sheet material and not custom routed. But again, I've never had an issue and have boats withalmost 2 years wear on turf jobs with no issues.
@jbird68
@jbird68 11 месяцев назад
The gray with blue stripes looks nice. I'd like to redo my carpeted boat with this. But on a carpeted boat the carpet actually folds over the edge. The edges of the woods would be exposed. Also, I feel like the edges of the foam would get peeled up over time from moving from lower deck to upper deck. The only thing in your video that bothers me is applying the foam over the seat base on the bow. I expect the foam to separate from the floor around the base. I would have either cut around the base or removed it and put it back over top of the foam. Just my opinion.
@R.A.H225
@R.A.H225 10 месяцев назад
Other on 7:08 the foam had a small spot on the blue so he put the subscribe logo on the screen over top of it. Lol nice 👌
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 10 месяцев назад
No. My editor puts subscribe logos directly after I show a cool technique or trick. Since i just demoed the stain resistance, the subscribe reminder comes right after that and before the clip breaks to the next segment. I assure you, Sea Dek doesn't stain from Dr. Pepper, if you look closely enough you can see it completely clean before the clip changes. I see what your saying, but no stains man. If we really wanted to hide something, not that I do that, but we'd simply edit the clip out altogether, not cover it up with a subscribe logo
@coolcc7277
@coolcc7277 Год назад
Nice 👍🏽
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
THANK YOU very much!👊
@user-vb1lh2ws7d
@user-vb1lh2ws7d Год назад
멋지네요 very nice video
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Thank you very much
@DFS_JUNIOR
@DFS_JUNIOR Год назад
Can I put Eva foam on wood?
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
it's been done before. I haven't. If i did I'd make sure a good layer of fiberglass resin was down, then sanded smooth, then turf.
@davida3528
@davida3528 Год назад
How much would it cost for a 16 foot Jon boat remodel
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
I'm currently fully booked until 2024 and not quoting any projects at this time.
@davida7500
@davida7500 Год назад
@@AnthonyJonesBrigadeBoats ok thanks
@darrell3368
@darrell3368 Год назад
We’re you located at
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
Georgia
@LT4247
@LT4247 Год назад
@@AnthonyJonesBrigadeBoats Where in Georgia?
@Wreckerrick201
@Wreckerrick201 9 месяцев назад
Welp…. Time to EVA my Freightliner!! *add to cart*
@DNYS8N
@DNYS8N 9 месяцев назад
I thought EvA foam was that spray in foam, no idea
@jandrmarinefabrics2425
@jandrmarinefabrics2425 7 месяцев назад
Hi i have just been watching your video and seen you tipping coke on the product so now tip petrol oil or acetone on it and see what happens please post so we can see thanks
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
I'll get right on top of that, although I know literally no one riding around with a can of acetone in the boat. It was simply to show you can spill drinks on it without it absorbing it. Not a test of what it takes to eat through the foam with a harsh chemical. It's inside a fishing boat and does great against mold, moisture, fish blood, and beverages you drink. Common sense applies to this product.
@jandrmarinefabrics2425
@jandrmarinefabrics2425 7 месяцев назад
Looking forward to seeing that all I am saying is that there is a far better product on the market than what you have there looking forward to seeing the video.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
Interested in what product you are referring too. Boat manufacturers are using Sea Dek and Hydroturf in factory options now. Manufacturers like Xpress and Prodigy. Bigger glass boat companies like Bass Cat are implimenting it. Not to mention probably hundreds of thousands of installs in 6 figure plus boats down in Florida from authorized sea dek installers. I've never had an issue but I don't pour acetone directly on it either.
@kaseycochran7619
@kaseycochran7619 Год назад
I have messaged you on Facebook messenger to inquire about getting a boat done and I have not gotten a reply yet
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
I'll check. Sorry. I get a lot of messages and do not use Facebook much. I am currently booked until 2024 but I'll check your message.
@NCredleg
@NCredleg 9 месяцев назад
Sound is too low ..
@beanieweenie9543
@beanieweenie9543 11 месяцев назад
Looks nice when it’s new but it doesn’t take long till it looks horrible
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Easy to clean. Have hydroturf in 2 yr old boat and in 15 mins with soapy rag and water it looks like brand new
@beanieweenie9543
@beanieweenie9543 11 месяцев назад
@@AnthonyJonesBrigadeBoats how often do you fish and what do you fish for. Because I promise if you fish for a living they are not easy to keep up with, they look like shit in a month. I can show you multiple boats lots of boats that it isn’t a year and it looks like garbage.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 11 месяцев назад
Bass. I've used it in many boats, all here on my channel. These guys fish tournaments. One guy has over 250 days out in his boat with hydroturf. Doesn't look brand new but when he cleans it it still looks very nice. Not sure the product your saying looks like crap that youve seen..Again, no issues here with hydroturf or sea dek and plenty of 6 figure off shore boats running sea dek! I guess if your a commercial fisherman, this product may not be for you. Try epoxy coating with anti skid rubber crumb in it!
@beanieweenie9543
@beanieweenie9543 11 месяцев назад
@@AnthonyJonesBrigadeBoats I’m running one of those multi million dollar offshore boats and I can tell you I only have it on top of all my fish box lids and drink box lids and I play hell trying to keep it looking nice, thank god I don’t have it on my deck. I know several guys that have it on their deck and while some of them may still look nice they will tell you it was the worst decisions they made when outfitting their boat. I think the brand we have on ours is sea deck. I will say there is a big difference in flipping bass in a boat and throwing bloody yellow fin and swordfish on the deck. It also makes a big difference if the deck is wet or not when it gets dirty. If it is wet when it gets dirty it cleans up fairly easy but if you throw a a bloody fish on the deck with dry Eva foam good luck cleaning.
@tbnationoutdoors-nateeckhold
Cuzzzzzzzzz
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Год назад
My cuzin my cuzin
@pumpkin971
@pumpkin971 3 месяца назад
Great install! However, the EVA foam is foam. It is not robust and only last for a short time. It is absolutely inexpensive material. Just don't last. Also difficult to remove. Not a fan.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 3 месяца назад
Not sure what brand you are running or the usage and storage of boat. We've been running it 4 yrs plus in boats with Hydroturf and SeaDek materials. Tournament boats. It may get some dings but beyond that, no issues. Definitely better than carpet.
@pumpkin971
@pumpkin971 3 месяца назад
I was incorrect about EVA material. It is about more the EVA material grade or pedigree. If it is pedigree "Hydroturf" or "Seadeck" materials, then it is robust. I am doubtful if you can get raw material from Hydroturf or Seadeck? They only sell trimmed pieces or set and not cheap. However, if it is EVA material from Amazon or Ebay, it will not last. You get what you pay for. I also viewed other videos of EVA material and supports my experience. It easily scuffs especially when your shoes pick up little pebbles or something abrasive. Removal is hell and will make you cry.
@rontrull9308
@rontrull9308 10 месяцев назад
Just have it professionally rhino lined last longer and a third of the cost...
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 10 месяцев назад
This is a boat channel, not truck bed channel
@jakeowens1770
@jakeowens1770 Месяц назад
Guy is a talker
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats Месяц назад
Guy is a complainer
@jameskimejr9062
@jameskimejr9062 7 месяцев назад
Personally i prefer the carpet. That foam makes a 20,000 plus boat look cheap with those blue strips. Solid color would be better looking.
@AnthonyJonesBrigadeBoats
@AnthonyJonesBrigadeBoats 7 месяцев назад
That's the beauty of custom boats, to each their own my friend.
Далее
EVA Foam 101: everything you need to know
12:21
Просмотров 11 тыс.
Lablaringdan chaqib olaman🐝
00:30
Просмотров 197 тыс.
Jon Boat Electrical Wiring Made Easy - Full Guide
47:20
EVERYTHING about EVA Foam | DIY and Professional
15:29
Просмотров 405 тыс.
HYDRO TURF Foam Boat Turf | DIY Tutorial!
10:39
Просмотров 8 тыс.