Ever wonder how I bend 2 x 4 x .188 frame rails? 

Yes, please drop the music. We want to hear the real music

Thank you very much!

*Wow, you can create frames from scratch in an hour, bumpers in ten minutes!* *What is the name of this mandrel bending machine?*

@@1nvisible1 Baileigh MB-4x2. They are expensive benders and worth every penny...

Kolll)lllq⁹9o jo] p0⁰m

You think that's fun, you should see bending T-bar.

Thanks for watching. make sure to check out some of my other frame rail bending videos and please subscribe to the channel

Thanks for watching, more to come!

I came to say the same. Thanks for sharing. I think you would benefit from getting a band saw though.🇬🇧

Much appreciated!

I have a 1942 1.5 ton Peerless hack saw. Just as tight as when they put the war production board tag on it back then. Many superior things up against a band saw, although the upright Do-All's are superb.

We had one in the basement my dad used it was a constant sound every night, had an automatic shutoff. I can hear it today

I’ve never seen a saw like that before.

That's correct, why have any noise other than a voice or machine sounds

Wow thats loud. I would have instantly ended video from it but this is different and interesting

You're 100% correct. The music was way too loud but quite frankly, videos don't need music in the background anyway. I don't know why people that put videos together think that they have to have music in the background other than professional singers that are making music videos themselves. If people want to listen to music or watch a video with music they're obviously endless videos on RU-vid where they can just sit there and watch the music videos. Just leave the damn music out. People want the content and are interested in what the people have to say. Nobody wants to hear the background music.

Thanks for watching

I'm in Calgary, what was the name of the company? I might have some work for them.

...bigger the stock, the bigger the machine... pretty cool right!

@@georgecraft007 Triple D bending

Oil field, mining & refining supplier.

I’d have liked to see a close-up of that mandrel, I’ve seen and used spiral mandrels for round (circular section) tubing but not foe square. My question is how is the mandrel extracted after the bend? Interesting 🤔 Great video, but would have been better with more explanations of what the mandrel is and how it works in practice. ❤🇷🇴

@@clivehorridgepretty sure the mandrel just keeps retracting out the back behind the bends. That’s why it starts with the tube all the way in the machine, and bends are done starting at the front. It just supports the inside of the tube where the bend starts so it doesn’t collapse/kink inwards. The mandrel always stays at the bending point as the tube feeds through while bending. That’s just what I’m gathering from watching the video, but could be way off. Lol

@@leebdj1949your correct, the mandrel his held in position by the bar you see at the beginning of the bending process . Because the tubing is being drawn or pulled by the bending process, the bar (with the mandrel at the end) is only under tension. The mandrel would be tight in the tube at the end of the process because the tubing was trying to deform during the bend process but cannot because the mandrel is only slightly smaller than the inner dimensions of the tube. When he retracts the mandrel, it only moves a short distance back from the bend before it is again loose in the tube. Hope that helps.

Yep, thanks

thanks for watching

thanks for the feedback

Thanks for the feedback

Thank you very much!

Thanks 👍

Glad you liked it! thanks for watching

Thanks for watching

Thanks for watching!

Thanks zip

It is easy when you have a bender like that one…

@@dannyzuko1843 thanks for your input

Thanks for watching!

thanks for watching

thanks man

Thanks for watching

thanks man

Its super handy, but man it was expensive and takes up a huge foot print of usable shop space

Thanks for watching

thanks for your input

Thanks

Thank you kindly

thanks for watching, would be much cheaper to order rails than get the machinery to do it

@@cornfieldcustoms About how much will you charge for the rails you bent up in the video?

@@crazyoilfieldmechanic3195 $1200 per pr for a set identical to the ones in this video

@@cornfieldcustoms thanks 👍. I have been binge watching your channel upon discovery of it. Not to be offensive but how did you afford to rent a place to work and get people to let you work on their cars at 20 years old ? I tried it for 8 years and 4 of them I was across the street from a one man street rod shop and I watched him struggle at it for 4 years before I switched to the oilfield just to make decent money. He stopped after 3 more years and got a good paying government job but I know we both didn't want to.

It was tough in the begging. The shop I rented in the begging was a total dump and cost me about $200 a month and was small and in the middle of no where. There were months I had to walk the ditches looking for cans to recycle to make the bills. I took on jobs I didnt want to, some times had no business taking on, but it was all a learning opportunity. I had a few friends that let me work on their cars at the time, and was building my own hot rod on the cheap. Once people heard what I was doing and saw the work I was doing, more work came in. It slowly evolved over the years and model changed completely as my skill set grew. The biggest thing that helped me in the begging was only getting stuff I could pay cash for to not get upside down, and I would always be working on a small personal project I could sell if money got tight for a while. Thanks for checking out my channel and if you to see more pics and stuff I dont have on here yet check me out on IG - Cornfield customs ltd

Glad you like it!

Thanks, I have another deep dive 2x4 bending video coming out next tuesday, shows the full process with doing hard way and easy way on the same rails

Thanks

Thanks for watching . These rails are $1200 a pair

@@cornfieldcustoms Thank you. Merry Christmas.

thanks

Noted!

You're welcome!

thanks

thanks for watching

Thanks for supporting the channel

Thanks for watching

thanks

thanks for watching

Glad you enjoyed it

thanks for checking it out and let me know if i can help you out in the future

thanks for watching

thanks, just let me know if i can help you out. my email is Cornfieldcustomsltd@gmail.com

Thanks for watching

Thanks for watching!

Thanks for watching

thanks for watching

Thanks for watching!

Thanks for watching

thanks for watching

Thank you very much!

mine too. thanks for watching

Thanks for checking it out

thank you very much and thanks for watching

Thanks for watching!

Look up the bendes a company called Davi makes.