EVERYTHING I Did to My Land Cruiser This Year! (2023 Transformation!)

Подписаться 21 тыс.

Просмотров 16 тыс.

50% 1

A year in review for the Land Cruiser 80 build! From getting it running for the first time with the new engine, to making massive tires fit, suspension mods, to moving to a different state, it has been an eventful year! Here's to 2024!!
Follow me on Instagram:
/ _rmgarage
Land Cruiser Build Playlist
► Full playlist: • 1993 Toyota Land Cruiser
Videos From 2023
► Crawler Gears: • Land Cruiser Crawler G...
► Engine Rebuild Finished: • My Toyota Inline 6 Eng...
► Engine Install: • The Engine Is In The L...
► Will It Run and Drive?: • WILL IT RUN AND DRIVE?...
► Breaking In The New Engine!: • Breaking In The Land C...
► Upgrading the Suspension: • Upgrading The Suspensi...
► More Suspension Upgrades: • The Land Cruiser Gets ...
► Wheels and Tires Installed: • The Land Cruiser Looks...
► Should've Fixed This Earlier: • I Should've Fixed This...
► Land Cruiser is a Nightmare to Drive: • My Land Cruiser Is A N...
► Shakedown Run: • Land Cruiser 80 Off-Ro...
► Exploring Remote Idaho Trails: • Exploring Remote Idaho...
► Solo River Camping: • Solo River Camping in ...
► Rock Slider Install: • The Land Cruiser 80 Ge...
Parts
Tent: amzn.to/3RKka0Y
Torque Wrench: amzn.to/3PWsbQZ
Impact Wrench amzn.to/3TGMD8u
Wire Strippers: amzn.to/3rywXdd
Koso Gauge: amzn.to/3PYnLt6
Aisin Fan Clutch: amzn.to/44nttZS
Aisin Water Pump: amzn.to/3pKoUtx
Milestar Tires: amzn.to/3qXYZyG
ICON Wheels: amzn.to/3PtT5iQ
Toyota FIPG: amzn.to/3jIM8NL
Chapters:
0:00 Intro
0:33 Crawler Gears
0:57 Engine Rebuild DONE
2:06 Midnight Motor Install
3:11 First Start After Engine Rebuild
4:49 Breaking The Engine In!
6:14 Upgrading Suspension
7:10 More Suspension Upgrades
9:12 Wheels and 38" Tires Install
11:18 Cooling upgrades
13:20 Radius Arms and Panhard Drop
15:23 Shakedown Run
17:49 Exploring Remote Idaho Trails
20:26 Solo River Camping
23:57 Rock Slider Install
#rmgarage #offroad #toyota #landcruiser #2023

Авто/Мото

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@fibrunugraha83 29 дней назад

so thats whats called build with heart & skill, not just passion and lots of cash..🤗

@mikedebear 9 дней назад

Great build! Thanks for putting together the great video, You're going to LOVE that thing. Take care reversing up steep hillsides when turning around on the trail with those tires- or if you start bouncing a tire on an obstacle. With the high pinion diff it tends to shatter parts when you go to a 37" or larger tire. Years ago we put Bobby Long Superaxles (chromoly) in the front and that seemed to fix the problem, but I'm not sure if the company that bought out Bobby's widow has the same quality or not.

@jaymay5457 22 дня назад

Beutiful work

@Chimib 4 месяца назад

Look to all those massive gears in the TC! 😍😍😍

@onssse 4 месяца назад

congrats on the build!! it is a bliss to have built it on your own..

@TommySveum78 2 месяца назад

Absolutely love this man! Inspiring as I'm currently working on my own LC. Thanks to you and your awesome work, greetings from Norway

@officialmallcrawler 3 месяца назад

Awesome build. I say keep the paint as is and just wrap it.

@adamlopez2894 Месяц назад

New subscriber here, great work man!!

@RM_Garage Месяц назад

Thank you!

@romanmuradyan220 5 месяцев назад

Very very exciting work

@TheRightLine 5 месяцев назад

Congratulations on your 80 build. Looking great and looks like you made some good choices on equipment. I've always wanted an 80.

@RM_Garage 5 месяцев назад

Thanks!

@guitarplayerlp7018 4 месяца назад

Well done, been watching your progress videos and really enjoyed them. You now have an 80 that will last another 30 years :) When doing the cooling upgrades I noticed green coolant? Do yourself a favour and flush that out completely and go the Toyota red coolant. Ive run only that in my 1995 80 series and when I had to do the head gasket at 480,000 km the water jackets in the head were spotless and shiny, same for the water pump etc.

@RM_Garage 4 месяца назад

Thanks!

@windish80 5 месяцев назад

Congrats on a fantastic year! You’ve done a first rate job on this LC 80 build. Inspiring me to get busy on mine!

@RM_Garage 5 месяцев назад

Thank you!

@curtisnewkirk6112 5 месяцев назад

You are inspiring, thank you for the old LC 80 wheels for my Toyota build! You have been such an inspiration to watch, and get my rig out in the hills

@RM_Garage 5 месяцев назад

Thanks man!!

@silvrsurfr808 5 месяцев назад

The 80 is lookin good! Can you share which springs you went with and part number? Thanks!

@RM_Garage 5 месяцев назад

Dobinson part numbers are C97-144VT, C97-145VT, IMS59-60684, IMS59-60685. Video link for the install is ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NTXgrcsCIZ8.html

@fasttrx88 5 месяцев назад

Good job I just picked up a 93 and I have a lot of work in head of me

@Rusust 5 месяцев назад

I also have one, he makes the best videos right now.

@josephpampliega 5 месяцев назад

Fun project, love the 38s. We running 37"x13.50" on 9" wide -12mm offset wheel using same springs except their 6" adjustable remote shocks. I noticed you did not install the 1.5"-2" bumpstops required for the front and 3" bunpstops required for the rear per Dobinsons documentation. Has your shocks bottomed out and also have you had to trim much in the rear to tuck the 38s with -38mm offset?

@RM_Garage 5 месяцев назад

I haven't had any issues with it bottoming out and I haven't had to trim, BUT I also haven't taken it through anything difficult enough (yet) to test it to that level. I do plan to install the bumpstops.

@colemancravens9435 5 месяцев назад

I recently just got an 80 as well and I’m not sure what my first mod should be. What would you recommend?

@toxic_grenade2997 2 месяца назад

Do you or anyone have any way of knowing if trailing arms have to be modified or buy adjustable ones?

@seanspeckels8089 4 месяца назад

What a great build! I’m curious how much you needed to cut for the 38s!? I’m on KM3 37s and really considering making the move up.

@RM_Garage 4 месяца назад

I haven’t had to cut anything for the 38s. I’ve wheeled it and flexed it out decently but not as much as it can go. It rubs a little bit but nothing worth cutting. I need to get it articulated and check where it does hit, if it does.

@Williams-world69 5 месяцев назад

Any plans on paint or wrap?

@RM_Garage 5 месяцев назад

Yep! Probably not for a while but definitely something I want to get done.

@Williams-world69 5 месяцев назад

@@RM_Garage I'll be watching! Love your videos man, I bought a 91 last year in really rough shape and I've been going through the really not fun stuff - steering pump, gear box, all the gaskets, water pump, egr delete, front axle rebuild etc etc. It's really awesome to see your videos and be reminded there is a light at the end of the tunnel. Especially seeing you slap a lift and some 38's on this thing. Awesome build and videography, keep up the great work.