Exhaust Cut Outs Give Your Vehicle a Split Personality

Подписаться 1,8 млн

Просмотров 2,4 млн

50% 1

I’ve installed not one, but 2 exhaust cut outs on my #FairmontProject. The first cut out didn’t work out as well as I’d hoped. The second cut out, which I install in this video, worked out much better.
I will be making a video about the wiring and switch installation at a later date. Like I said in the video though, it’s really not difficult. All you need is power, ground, and a place to mount the switch. The rest is covered in this video.
Camera: Brian Kast, Eric Cook
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: ru-vid.com?su...
Thanks for watching!
Parts
Dougs Exhaust Cut Out 3”: www.jegs.com/i/Dougs-Headers/...
Race Ready Exhaust Cut Out 3”: www.jegs.com/i/Race-Ready/815...
Y Pipe with Flange: www.jegs.com/i/JEGS/555/30752...
A Flange You Don’t Have to Cut a Hole In: www.jegs.com/i/JEGS/555/30991...
Turn Down: www.jegs.com/i/Dougs-Headers/...
Tools
Milwaukee Band Saw: www.milwaukeetool.com/Product...
Welder: www.longevity-inc.com/migweld...
Plasma Cutter: www.longevity-inc.com/forcecu...
My Crimpers that Broke: www.jbtoolsales.com/sg-tool-a...
My New Crimper: www.jbtoolsales.com/astro-pne...
Related Videos
The Fairmont Engine Block Assembly: • Engine Assembly Cranks...
5 Things You Should Know When Building a Turbo Engine: • 5 Things You Should Kn...
How Did the Fairmont Catch Fire?: • How Did the Fairmont C...
Why I’m Building a Fairmont: • Why I'm Building a Fai...
I Got Pulled Over in the Fairmont: • I Got Pulled Over in t...
Removing the Old Engine and Transmission #FairmontProject: • Removing the Old Engi...
What Really Happened to the Fairmont Piston?: • What Really Happened t...
Epic Story Bro the Fairmont Goes to Jekyll Island 2018: • EPIC Story Bro! (Jekyl...
The #FairmontProject Playlist: • ETCG Gets a New Car! -...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Google+: plus.google.com/1001951801966...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Авто/Мото

Опубликовано:

29 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,5 тыс.

@markmalinowski5951 5 лет назад

Valve closed: Doug Demuro Valve open: Regular Car Reviews

@viburnumwillow4669 5 лет назад

Big facts

@TheBarroomHero321 5 лет назад

Valve open: my poooooooooooop is broooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooown

@viburnumwillow4669 5 лет назад

@NPC#6789 Orange Man Bad Yes bröther.

@ihavenocluewhatoput 5 лет назад

truth!!!

@desmondmoonbear4143 5 лет назад

LOUD AND BROWN WINGA DINGA WINGA DINGA WINGA DINGA WINGA DINGA WINGA DINGA WINGA

@malcolmyoung7866 5 лет назад

That smug look when you opened the valve.....I bet you NEVER drive that car with the valve closed....

@commodore665 5 лет назад

my thoughts too , Eric is thinking " HELL YES ' , I know I am

@thotpatrol7836 5 лет назад

Only when he sees the cops

@JoeCubicle 5 лет назад

I saw that too!

@mkfourgli1 5 лет назад

I saw it and I lmfao

@TheCrystalGlow 5 лет назад

If the cops ever pulled me over for loud exhaust I would immediately shut it. I’d be like “what loud exhaust? “

@1995camry1 5 лет назад

I’ve been running my cutout same style as your race ready for 3 years now no issues I love it. Great video

@smokintires8181 4 года назад

This man actually needed his muffler bearings replaced.

@DavidMirandaF 5 лет назад

Instant smile button, right there in the dash :)

@SashaZvyagin 5 лет назад

I thought that was the Nitrous button? )))))))))))

@frankvandendool882 5 лет назад

@@SashaZvyagin Nitrous is for people that can't drive!

@SashaZvyagin 5 лет назад

@@frankvandendool882 - you can't afford a nitrous kit, can you? Sad. And so I guess forced induction is for people who lack driving skills too, by your logic?

@dennisbanks706 3 года назад

@@SashaZvyagin hahaha tell em!!!

@damannoa 5 лет назад

You know what Eric, I was just thinking to myself that in order to be a successful youtube video blogger such as yourself you need to humble and be able to have thick skin. I've noticed that you've handled criticism very well and haven't fed the trolls or stooped to a level such as them. Now I'm not calling everyone that has an issue with your video or disagrees with you a troll but there are times when people get rude and downright disrespectful and you haven't given them a soapbox. To me, being able to remain professional, respectful and calm when being criticized is a very important key for success. And I think people need to take note of this and see why he's amassed such a loyal following. When compared to all the other guys that were on the pull-a-part challenge I think Eric gets the most amount of criticism and I believe he handles it exceptionally well.

@ericthecarguy 5 лет назад

Thank you!

@LeaderofStupid 5 лет назад

Well said, friend. I concur

@stanpeed2479 5 лет назад

Personally I had problems with the gear drive on the valve application. I decided to go with the pneumatic actuator butterfly .opening through the vacuum from my from my inlet manifold..

@jackpeltzel 5 лет назад

So your old one had “muffler bearings” then? 🥴

@Zag328 5 лет назад

Why does this not have more likes?

@BigTexZoomer 5 лет назад

Underrated comment of the year LOL

@Hayden734 5 лет назад

H@H That it did! Why didnt I catch that!?

@nextbestthingrc7446 5 лет назад

Holy crap. You just dropped the mic. Now we’re left with blinker fluid

@Jenuin 5 лет назад

Jack Peltzel lol I remember joking about that as a kid hahaha so they really do exist. Lmbo

@Mo5005 5 лет назад

I agree, I'm all about crimping. I used to use the ones you shown in the video, but found that I had better success with using non-insulated butt connectors and then following it up with marine grade heat shrink tubing. the benefit of marine grade heat shrink tuning is that it is lined with adhesive, which provides a weatherproof seal to your connection.

@johnjones9534 5 лет назад

Yes! The look on your face when you openned it up for this first time. Perfect.

@stanggt5090 5 лет назад

This is the cleanest, crispest look automotive channel i have seen. Your recording equipment must be top notch.

@UtahDarkHorse 5 лет назад

I like that when you make a small mistake, or even a not so small one, you admit it and show it. Being a fallible human myself, I feel more of an akin to you than some of the others. Between that and your easy to listen to affect, I really like your channel and appreciate your videos. Thank you and keep up the good work.

@ericthecarguy 5 лет назад

Thank you!

@MrLubetube2000 5 лет назад

Great video! I watched the whole thing even thought I have no intention of installing one for myself. Eric, your videos are always on point.

@plumbc007 5 лет назад

Keep them coming eric

@stephenschilling1020 5 лет назад

Dude your awesome for taking the time to do these videos. I lean good stuff watching them. Thanks keep up the awesome job.

@600rrgraham 5 лет назад

I want you to bring fairmont videos back. Who’s with me ?! I never got tired of them

@Xsoul1000 5 лет назад

The sound it makes when open it hilarious for this sleeper car. The smile that comes to your face when open is priceless.

@2LateIWon 5 лет назад

Just a small tip when splicing wires stagger them. This will keep the bulk out and keep the wires tighter together. Especially if you have to feed the wires through grommets or tight spaces. Great job!!! I have cut outs too (Manual) on my vette I need electric cutouts now!!!

@wobblysauce 5 лет назад

@Maoushin 5 лет назад

Another small tip or at least confirmation of theory there is a very good reason for crimping and splicing opposed to soldering. Soldering creates a hard contact point that the vibration of vehicles can cause rapid failure of the wiring. The crimps allow to wire to maintain flexibility so the vibration has less of an impact.

@JOSHUAALLEN28 5 лет назад

The splice should have been inside the vehicle to keep it out of the weather/vibration.

@ericthecarguy 5 лет назад

Great suggestion.

@turboflush 5 лет назад

@@ericthecarguy Your splice is fine.. especially for what it is for. I reserve solder for splicing a wire on something critical. At connector.. use new OEM crimp terminal. If to much solder is allowed to flow into wire.. yes it can travel up the wire and make it "brittle". This also has to do with the amount of flux. A little goes very far.

@darthvincor 5 лет назад

Cool how those dash buttons are of the same style as the rest of the dashboard.

@ericthecarguy 5 лет назад

That was the plan! Thanks for noticing.

@badlanz79 4 года назад

Go with BadlanzHPE! 5 year warranty, best customer service, ZERO leaks or rattles!! Better cost than QTP, etc

@Jpk516 5 лет назад

I've been looking for a setup like this for a while now. That's so sweet that this exists!

@maxymk123 4 года назад

eric literally everything ive wanted to do to my 80 Z you have made a video on, thank god for you channel

@tommyandchill 5 лет назад

I wonder if my neighbor will fund this for me

@mccoybyz1099 5 лет назад

Lol ,that's a good one!!

@dkim7190 5 лет назад

Hahahahahaha

@mikejames1860 4 года назад

I'm sure mine would lol open heads now for 6years

@bthompson1767 3 года назад

Nope I wont

@someone972s 5 лет назад

That race ready cutout opens pretty fast for that style. My QTP cutout of the same style takes a few seconds to open. However the additional gear reduction in the QTP also seems to keep it shut under load which it sounds like the race ready one might have issues with based on when you said that it opens slightly if you get on it. I've also experienced the pain of making a turndown fit the cutout bolt pattern, where I ended up taking a 3" hole saw to the block-off plate that came with my y-pipe.

@Mr.Deko86 5 лет назад

Thank you for the video. I had no idea this was even possible. It's kind of a no-brainer if you're adding a performance exhaust. Mind blown.

@MachuPichuu 3 года назад

This video is great! I need to set this up on my Subaru to keep the family happy on road trips and me happy when i'm by myself!

@zombabeger 5 лет назад

Cool invention. Really need one of this.

@jasonyoung6420 5 лет назад

I'd put those in my car and just leave them open all the time, except for about 10 minutes every two years

@LeaderofStupid 5 лет назад

Im pretty sure these are also illegal in some places

@Blazer02LS 5 лет назад

Pretty much all places.

@jmraines256 5 лет назад

@Blazer02LS I didn't know that. I've had em on my G8 for 7 years and have never heard anything about em being illegal. Probably been closed a total of 5 minutes in that 7 years.

@pfannkuchengesicht42 5 лет назад

there are cars that have this from factory, but you cannot actuate it manually, it automatically open depending on the traveling speed.

@Blazer02LS 5 лет назад

Look at your states vehicle laws. Most have it somewhere in them that modification of the exhaust to increase the noise level is illegal, many specifically say that exhaust cut-outs and straight pipes are prohibited. Here are 3 examples of the 49 states that have restrictions. The only state that doesn't list them is Vermont Alabama - Code Title 32. Motor Vehicles and Traffic. § 32-5-216 (a) Every motor vehicle shall at all times be equipped with a muffler in good working order and in constant operation to prevent excessive or unusual noise and annoying smoke, and no person shall use a muffler cut-out, bypass, a muffler without baffles, or similar device upon a motor vehicle on a highway. Illinois - Sec. 12-602. Mufflers, prevention of noise. Every motor vehicle driven or operated upon the highways of this State shall at all times be equipped with an adequate muffler or exhaust system in constant operation and properly maintained to prevent any excessive or unusual noise. No such muffler or exhaust system shall be equipped with a cutout, bypass or similar device. No person shall modify the exhaust system of a motor vehicle in a manner which will amplify or increase the noise of such vehicle above that emitted by the muffler originally installed on the vehicle, and such original muffler shall comply with all the requirements of this Section. North Carolina - (b) It shall be unlawful to use a “muffler cut-out” on any motor vehicle upon a highway.

@balalaika7088 5 лет назад

as some one that does welding for a living this was not as cringy as i thought it would be. great job man

@troymecey 4 года назад

Good video. I am planning to install exhaust cut outs this summer and I appreciate the comparisons.

@bishopsdiyautorepair5437 3 года назад

Dang that sounds good I’m gonna have to look into installing one on my car

@MrHarris414 5 лет назад

Love that wordplay in the title

@POL3INAROW 5 лет назад

Once again, A very good video. That sleeper fairmont is AWESOME Eric! Love your work, and again reminds me of my late Dad. Keep it up buddy.

@surfclod 5 лет назад

Thanks for this video. I'm beginning an exhaust build for my car and want to incorporate a cutout, this helps.

@kananiedwin 5 лет назад

1st time seeing a portable blade saw. Awesome

@bobbymayyy 5 лет назад

I read your comment before I saw the band saw and I was like "what how I work with one everyday" 😂

@deathbymonkies2305 4 года назад

This is great for when you care about your neighbors at 3 am.

@rhawk2424 5 лет назад

My favorite part was the snap-on "flank drive plus" wrenches. Best in the business!

@kevintyler7614 3 года назад

I have had Doug's cutouts 6 years, work great

@kellyspeppers 5 лет назад

Back in the 60s we would weld on 4 inch down dumps on each side of the engine and use threaded pipe caps on the outlets. I know not automatic but they worked good.

@LaunceBugbee 5 лет назад

Sweet beard... another great vid, duder.

@sbfguy7793 5 лет назад

@@X11CHASE no u

@grady.stu.8300 3 года назад

My buddy had a Fairmont in highschool.. Im 42 now. We called it the fairmonster. Also had two 12" subs in the back. It was his grandmas before she passed. Cool car.

@b9doc 5 лет назад

Great video!! Top to bottom, you covered all the basics.

@yeeturmcbeetur8197 5 лет назад

The new one is what’s called a “butterfly valve”. I was surprised at the old one because the old one was way too complicated. The new one with the butterfly makes so much more sense.

@javonteshavers4388 3 года назад

Yeetur McBeetur yet old was more efficient

@pappu2490 2 года назад

wont the new one leak and cause it to fail inspection? or am I wrong?

@chrisluke5467 3 года назад

18:15 - when it’s actually used

@joserobertocastellon 5 лет назад

Great video Eric. That purr when the valve is open is just delusional. I love it!

@jl3059 4 года назад

Thank you Eric. Thank you Chris fix. Thank you Scotty kilmer. What an age we live in

@wiifan62 5 лет назад

Eric, RRP will sell you turn downs just like you made. You just have to call them. RRP is lifetime warranty too. I bought a set 4 years ago and one somehow went bad and was blowing 20 amp fuses. called them and they advanced shipped one out to me, brand new. Got the new one before i even got the chance to send out the bad one. They even threw in some shirts and stickers.They also have a wireless kit you can open and close them with a wireless remote. Ive got a set with the wireless kit for my 2014 Challenger with a built 392 that has a 2.9 whipple on it. Its mighty loud ;)

@chrisbamford2196 5 лет назад

I was listening to the sound and I started nodding my head. Enough said.

@scottflurer8987 2 года назад

I had this done when I put a 3" exhaust, front to back (Magnaflow cat, Flowmaster 10 series muffler and 3" tailpipe) on my 98 Jeep Grand Cherokee 5.9 V8. Small switch on my console next to the shifter. Run it wide open on the highway. LOVE the sound.

@danquinnell3502 Год назад

Good to see another Jeep Grand Cherokee Limited owner. Haven’t modded mine a whole lot but love the vehicle.

@unclegeorge6175 5 лет назад

A man with a plan can Jerry-rig anything. Great video.

@Eratiik 5 лет назад

Had a similar mod on my old Silvia. Was great when sitting in traffic or leaving a quiet neighbourhood at night. It was more a valve in the exhaust that opened and closed which basically had it sit on an angle depending on how loud you wanted it. 1st-quiet af, more than halfway closed 2nd-slightly louder than 1st. 3rd-fully open straight pipe sound.

@samuelhenry8366 10 месяцев назад

Interested in this!!

@adventureoflinkmk2 5 лет назад

5:40am and theres a new Eric the car guy video!

@howardcrider10 5 лет назад

Dude I’m so glad your back on RU-vid. Finally thank god!!! So great seeing you my friend ❤️😎😎😎😎😎😎😎😎

@anatolydzyuba1750 5 лет назад

Finally a big RU-vidr doing a video on exhaust cutouts

@hedgeearthridge6807 5 лет назад

I was just thinking the other day, "I would like loud pipes, but I would miss being super quiet when I wanted to be quiet. Wish there was a valve you could turn or something." And there we go, it's real. Out of my price range, but real.

@miguelcastaneda7236 5 лет назад

Patrick Earthridge jc whitney . cable pull been aroud for decades..cheap

@fatbowe 5 лет назад

In the 60's had a Lake pipe plug..on SATURDAY Night unscrewed the exhaust plug and went out to race...😁

@jaysenp7083 5 лет назад

Great video! Ive been waiting for a lengthy video like this, thanks!

@ceddiesmallz 5 лет назад

could not wait for it to cool ,luv it .Good job

@Seegalgalguntijak 5 лет назад

Greetings, Videos! German car tuners that build exhaust cutouts that actually bypass the last muffler (not the middle one[s]) and that works in such a way that the exhaust still exits through the same tailpipe, so there is an actual bypass that it gets routed around the muffler and back into the exhaust pipe.

@johnsmither8377 5 лет назад

Interesting can you link an example.

@cryoburned 5 лет назад

Yeah we call what's in this video a "dump pipe" since it just dumps the exhaust right after the cut out.

@ckkbleev 5 лет назад

I have a vacuum powered cutout and it's A LOT more reliable than standard QTP style cutouts as it uses air to push it open and closed. The first and second motors in the electric cutout that I used to have burned out in maybe a month or two while this new vacuum powered cutout hasn't missed a beat for several months. Plus, it doesn't leak nearly as much and even better, it was only around $100 off Amazon.

@ElSombreroNegro 5 лет назад

Link?

@samuelhenry8366 10 месяцев назад

Interested in this!!

@spelunkerd 5 лет назад

What an interesting design! I've been told that when older motorcycles are switched to an open exhaust, those old fixed carb jets need to be adjusted to compensate for the change in exhaust backpressure. In any car made in the past 30 years, fuel air ratios are adjusted automatically by feedback from upstream oxygen sensors. It would be interesting to watch how fuel air ratios change from open to closed exhaust, though I assume that won't be possible in the Fairmont. Nice job. Stay dirty, Eric!

@starseedish6083 Год назад

"this is open" with such a beautiful smile that comes from deep within 😊

@nakeddrifter4685 5 лет назад

I would have done a lot of things different but I cant knock you for trying, and I really like how you teach people how you do stuff. I'm a qualified diesel mechanic myself and I also do alot of electrical work. A bit of advice, dont twist the wires before you put them into the connectors you want them to actually crimp with the plug, when they're twisted it doesnt grab as good. I prefer solder but that's just me.

@themoe1105 Год назад

Can I do both

@skinisdelicious3365 4 года назад

I watched this tripping balls and my god you are the bob ross of cars

@gaming_and_reality1018 3 года назад

If this is true. Might be better then the muffler bearing comment

@Jenuin 5 лет назад

Awesome. Thank you. I’m a fan of the butterfly valve. Been thinking on this. Didn’t know they all leak. But that makes sense. 🤜

@davebarron5939 5 лет назад

I swear, we smiled and smirked at the same time, loved it great sound! Now I have to add more work to my project! LOL Great vids Thanks.

@Not2480 5 лет назад

New is ..as you put it way better.low profile love.it..

@badass98svt 5 лет назад

@EricTheCarGuy Have you considered a "Loudvalve"? No wiring or switches needed. They automatically open at 6-7 #s of boost.

@jonathangarzon2798 3 года назад

So a spring actuated dump valve, can you link or give the brand to one I like the idea

@HUNTER01101991 5 лет назад

God I've missed videos on this thing, please keep them coming !!!!!

@jamesreaves5534 3 года назад

When you said the screws on the butterfly valve could vibrate out I have the idea that you could use some threadlocker red. This is the strongest threadlocker and has to be removed with heat. This is the kind of threadlocker you typically use on things like main bearing caps and Rod bolts internally inside of an engine so it should be permanent and withstand the heat of the exhaust. If you were to remove or just back off a little on the screws of the butterfly valve and add a little bit of the threadlocker red before you put it all together then you probably wouldn't ever have to worry about the screws vibrating out. Just an idea, $3 or $4 for a little tube of threadlocker red that's cheap insurance. This way you would never have to worry about taking them back off the car and trying to repair them once installed they would be good for the life for the exhaust. Your work is excellent. Great video. God Bless You and Your Family!! Jimmy in NC....

@chetleonard169 5 лет назад

Good work. ERIC!. buddy...next time you wanna use a box cutter to strip insulation cutting in the direction of your fingers, lemme know so I can look away first. lol

@omardude39 4 года назад

tell me about it, I had visions of slashed fingertips!!

@Djm9393 5 лет назад

great video do more please! n got any welding vidoes

@goofyleo3869 5 лет назад

I put home made manual cutouts on my FE powered '65 Galaxie (see avatar) in '97; think I've done 1K quiet miles since then. ;) Mine are basically 3bolt blank-offs that pivot out of the way on one bolt. These electric ones look awesome and I may have to upgrade, thanks to this vid. :)

@Mrkc47 2 года назад

Seems a real nice guy with great attitude so gets my 👍🏾

@Sterlin876 5 лет назад

I wish you lived in Mass, I'd literally hangout in your shop all day on my down time lol

@pbsteelers481 5 лет назад

Wake up..drink coffee..run 2 end zone prepare to take the browns 2 Superbowl....and watch Eric turn wrenches nother awesome morning

@thefordmaniac 5 лет назад

Or drink coffee while taking the browns to the superbowl

@InsideOfMyOwnMind 5 лет назад

Never heard that one before. 😀

@YamFZR93 5 лет назад

I had a similar thing except the meatloaf from last night should have come with a 12-hours-to-EXPLOSIVE DIARRHEA Warning.

@InsideOfMyOwnMind 5 лет назад

@@YamFZR93 Write the Surgeon General. That would be an epic package warning.

@mccoybyz1099 5 лет назад

Are you sure you weren't looking into my bathroom window 2 minutes ago , were you? LMFAO, birds of a feather flock together I guess , Right?

@strongbow549 5 лет назад

Pure awesome Eric. Going to fit some to my car.

@knight1987 3 года назад

When you flipped the switch It made me smile!!

@michaelriddle134 5 лет назад

They leak for a few reasons: no gasket on the butterfly valve and high pressure due to the Y joint always putting exhaust flow into the closed valve. You could theoretically help a LOT with leakage by having a valve with a gasket and/or also having the valve built into the Y splitter at an angle so that when it's closed the air is routed down the exhaust path better... I wonder how much back pressure is being added to the exhaust when the valve is closed due to reflection off the valve.

@ericthecarguy 5 лет назад

I think you'd melt the gasket the first time you got on it with the vale open. Honestly, you don't really notice it much, but I did feel it was worth mentioning. Thanks for the comment.

@JoeIsCrazyWillman 5 лет назад

Nah, you wouldn't melt an exhaust header gasket. That's what they're made for. Anyways, also, having at least press bent, if not mandrel bent pipes would help as well.

@mblake0420 5 лет назад

Tip, when welding thin stuff, use a piece of wire as a spacer and u won't need to bevel it to get good penetration

@axtra92 5 лет назад

M Blake Jr ??

@andreslizarde7598 5 лет назад

Look up how to butt weld pipes with bevels.. Same concept Blake is talking about. Wire keeps gaps perfect

@mblake0420 5 лет назад

@@andreslizarde7598 yup, used to weld pipes professional, thin stuff doesn't need a bevel. Especially exhaust

@andybrace4983 4 года назад

Great work Eric sounds great

@sleal1194 3 года назад

Your face when you switched it open! Priceless!

@therampman1 4 года назад

Back in the 60's' we called them drag pipes

@cobra454tim 5 лет назад

Oh Eric there was a sparkle in your eye when those cut out opened... I don’t blame you either I giggled like a little school girl when I heard them open as well.

@Blindbat1337 5 лет назад

Love this video so much. Thanks Eric!

@joeseptien2182 5 лет назад

I hadn’t seen your videos in a while. You’re awesome more fairmont!!!

@Gold63Beast 5 лет назад

4:12 “when a customer tells you they hear a noise they didn’t hear before they gave you the car but you can’t hear it”

@TheMaafiaGarage 5 лет назад

I'm dead lmfaoo

@frankvandendool882 5 лет назад

It's actually ridiculous how many times that happens in a garage xD

@1970chevelle396 5 лет назад

Just keep it closed when the cops are around.

@Blueknight1960 5 лет назад

Why? If you're going to take the time to make your exhaust sound like shit, be proud of it even around cops. Don't be a pussy.

@MrDanielsahne 5 лет назад

@@Blueknight1960 In germany you get fucked by the cops when your exhaust is loud. So it has to be closed when cops are around.

@AMCguy 5 лет назад

@@Blueknight1960 its a 1000$ fine on the spot for loud exhaust in california

@afox5319 5 лет назад

@@AMCguy you have it easy, in germany and austria you could potentialy go to prison if you drive without a catalytic converter. I said potentialy because most of the time it will only result with a criminal charge for tax evasion and like a 3000€ fine

@ernieernie3854 5 лет назад

@@afox5319 why tax evasion??

@arttafil6792 3 года назад

I had some cutouts on my 1964 GTO convertible with a 421 Super Duty engine. I built my own that used choke cables. turned a beast into a real monster!!! that was in 1971!

@AGreedyTree 5 лет назад

Your new videos are alot better than your older ones from when you had your old shop in terms of production value.

@ericthecarguy 5 лет назад

Thanks.

@cakeisalie 5 лет назад

your "quiet" mode is louder than my cat delete no muffler SUV

@thewt 5 лет назад

I would be interested in a video that was compiled solely of sound clips from his car. Valve open, valve closed, waste gate opening, blow off valve if he has one. Any and all of it.

@X11CHASE 5 лет назад

Walker Ashcraft 😂😂😂

@tryhard7655 5 лет назад

I have Quick time performance Cut-outs on my 2015 SRT Challenger, made a huge difference

@pyozoa 3 года назад

I did the same to my 01 Dak and I love how it sounds! I have a wireless switch that hangs off my keychain so I can open it even if I am not in the truck.

@Grotskii 5 лет назад

That beard is looking good

@benlee2765 5 лет назад

He looks like the "fuck her in the pussy" guy

@hanskinslo326 5 лет назад

i thought the same thing!

@csn6234 5 лет назад

You like a man with a beard, eh?

@Pgcmoore 5 лет назад

mine is getting there, although a lil more gray in mine ;)

@csn6234 5 лет назад

@Little Miss Sunshine "Girls do it better"

@joshuathompson5160 4 года назад

I have a cut out on my 91 mustang with a 415 stroker I call it party mode and business mode

@Iowa599 5 лет назад

My 2000 Accord Ex-V6 had factory dual mufflers, with a single pipe that splits near the right-rear tire, just in front of the mufflers. So I cut it, keeping only the left-side, after Y-joint. Then I installed a straight pipe with a splitter followed on the right side, by an e-cutout and the exit (a turn-down). On the left it used (several) reducers to get from 2.5" to the stock (left) muffler. Then I built a control system that tapped the wire for VTEC solenoid control (by the ECM). So it ran like stock, until VTEC. Then WFO, until I slowed, and it would calm, too. Some cars come with their own split personality, but we muffle them.

@robbymidgett3797 5 лет назад

I put one of these on a 1992 Ford Taurus SHO a few years back. Definitely recommend it to all other SHO owners. Make your car sound like an Indy car with a flip of a switch.

@paoyaj1 5 лет назад

Xforce varex makes mufflers with built-in butterfly valve Controlled by ur phone, switch or remote

@AustrianAnarchy 5 лет назад

Solder vs. crimp: The Holley folks have a video(s) out there that goes in depth about why crimp is better than solder in most automotive applications.

@PandaMan02 5 лет назад

If you do it right, it doesn't matter what method you use. They both have pros and cons

@wobblysauce 5 лет назад

That is why you have similar joiners like Eric used that crimp then heat up for solder flow and waterproofs with the glue+ heatshrinks at the same time...

@mikeypops73 5 лет назад

Anti seize of some kind?

@harryconover289 5 лет назад

I have done both and in the worst condition wiring on heavy duty very leaky hydraulic hammer lots of vibration hot the crimp type slipped apart but I youse the crimp type now it’s important to rich the right pressure so a Ratchet type crimp-per is needed this and good quality connectors and your set !

@oliverwatson1567 5 лет назад

I normally solder and then use at least 3 layers of heat shrink to stop the joint from flexing too much. To waterproof it, use heat shrink that has glue or put hot glue under the heat shrink right before heating it