Тёмный

Extreme Car Audio FAIL & Fix - "Bucket o' BASS" Chevy - Kick Pods, Mids/highs, New Headunit Video 5 

meade916
Подписаться 1,1 млн
Просмотров 368 тыс.
50% 1

tons of pics here - www.stevemeadedesigns.com/boa... - Join our car audio community today!
Tesa Tape can be found here: www.ceAutoElectricSupply.com
My old buddy Rob, known him for 30 years, came by and said his fuses kept blowing..and asked if i had a "40 amp" for him. I took one look at his system and knew i had to do something. I fixed him up and got him on the road. I told him, when i have time, i will go through and fix all this stuff for you. It's BAD. REAL Bad. In a funny way. I guess he got it mostly like this. I don't know who is responsible for the bucket o' bass but i HAD to share this with you guys. Make sure to subscribe and hit like if you think i should hook Rob up proper and fix this for him.
Support these videos here! / meade916
Visit my site! Join the forum! www.wcCarAudio.com
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ smd-steve-meade-design...
Follow: / meade916
Visit SMD Partner Sonic Electronix at www.sonicelectronix.com

Авто/Мото

Опубликовано:

 

4 апр 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 584   
@meade916
@meade916 6 лет назад
guys..i am doing this 100% free of charge for him. So any complaints, send that to the complaint department (the trash can) :D Just sayin'. Thanks for watching! I actually showed some of this live this morning so don't miss the next early feed on my instagram channel instagram.com/meade916
@TheLolo919
@TheLolo919 6 лет назад
meade916 no complaints Steve I just appreciate the time you take the show us how to do it right and give ideas how to build a good sound system
@jamesmurray4312
@jamesmurray4312 6 лет назад
Yeap, and because you're doing all of that for free, every vid of this build you post, I'll just have to post the same comment.
@rickr5205
@rickr5205 6 лет назад
Good shit dude!..Its rare in this day and age for someone to do shit like this for free and still do top notch work..
@lamaur1004
@lamaur1004 6 лет назад
meade916 your s great friend doing this for free I wish I had someone to do this for me you don't even get this type of brotherhood in the Army no more everyone be all for self these days but I love your videos and couldn't wait for this one. Big ups to you and what you do man
@alexisking4316
@alexisking4316 6 лет назад
Where u get the kick panels?
@saucetheprophet6208
@saucetheprophet6208 6 лет назад
i just wanna take this time to thank brother meade because if i didn't stumble across your page all those years ago i wouldn't be the basshead i am today
@ArgueWithDont
@ArgueWithDont 6 лет назад
Whats not to like in this video? people just mad they dont have friends with talent. keep up the good work!
@trebekanalbumcover
@trebekanalbumcover 6 лет назад
I like that the attention to detail hasn't be reduced, even though he's doing it for free and the truck is pretty beat. As always, great work Steve.
@renegade262
@renegade262 6 лет назад
These guys don't Get it. It takes time to do it right. Props to Steve for taking time outta his bizzy as heck schedule to help out a friend. This is what it's all about folks.
@gfrom2537
@gfrom2537 6 лет назад
Steve is the MVP for doing this free of charge talk about the homie hook up
@KZA1337
@KZA1337 6 лет назад
I always told people from vids back in the day... STEVES GOT THIS yall be tripping for no reason steve be doing this for fun and out of his heart to help the homie out
@jayemlov
@jayemlov 6 лет назад
Nothing like doing what you love listening to good ol’ 80’s rock shop music.
@ColvinAvianBreadline
@ColvinAvianBreadline 6 лет назад
I love these types of builds... and you always listen to good music in your shop.
@lakorai2
@lakorai2 6 лет назад
Attention to detail and craftsmanship. This is why Steve Meade is the man for installs. The heatshrink over the bullett connectors for the head unit and twisting of the wires. Too many people in the service industry do shit half ass.
@joshuahunter8194
@joshuahunter8194 6 лет назад
Well anyone who would complain about free education on car audio is a fool in my opinion. I've learned a lot and love the videos. Keep them coming.
@soundman_caraudio
@soundman_caraudio 6 лет назад
👌👌👌👌👌👌
@Flameing_Stick
@Flameing_Stick 6 лет назад
wassup doug
@fucken.joseee
@fucken.joseee 6 лет назад
Can i help you!?
@caraudioetc
@caraudioetc 6 лет назад
SoundmanCA you gonna lend Steve your $10M 6th order band pass blow through plans 😄😄😄
@Bacardi6111
@Bacardi6111 6 лет назад
Can’t wait to see the final result. This thing is going to be sweet 🔊🔊
@Salgadovisuals
@Salgadovisuals 6 лет назад
One of my fav things to do is smoke some kush and enjoy Steve’s videos, keep up the great work man always love your vids 💯
@matt34003434
@matt34003434 6 лет назад
Never heard of B2 before this series, but those 6.5" look beefy!
@360ModsandHacks
@360ModsandHacks 6 лет назад
Coming Along Nicely! Keep up the good work.
@Reefdevil
@Reefdevil 6 лет назад
love the choice of music in the background... doesn't musically discriminate
@kahukuboy
@kahukuboy 6 лет назад
Steve killin it once again!! Love these smaller builds. Like builds i could actually afford. Lol.
@Lukedawg1984
@Lukedawg1984 6 лет назад
I’ve been following this build/install from the beginning and every time you post a new update video makes me more and more excited about my next build I’ve been collecting stuff for! Keep the videos coming you are inspiring me with some amazing ideas brother! SMD =‘s bad ass!
@draftelite6770
@draftelite6770 6 лет назад
Luke Dawg forreal been waiting to see the next video
@silverlockexcel9668
@silverlockexcel9668 4 года назад
The only reason I knew how to install my subs, mids n highs, and amp in my civic was from watching your videos. Truly amazing work Steve.
@meade916
@meade916 4 года назад
thanks man!
@flaman78
@flaman78 6 лет назад
This project is shaping up real nice. That Second Skin is a good product. Went over to the factory a couple weeks ago to get what i need for my car. They came out to the parking lot to ensure i got that full coverage of Sound Deadening for my whole vehicle. Great group of folks.
@williamprice4269
@williamprice4269 6 лет назад
Byron Chambliss I’m doing my Impala with Second Skin. I am also going to use their fast rings system, I have always used Dynamat, going back to when they first came out.
@chrishaley736
@chrishaley736 6 лет назад
It's amazing how you make the headache of wiring look smooth and graceful. Love watching you do you. Beast
@supersportrsz28
@supersportrsz28 6 лет назад
I Love these series!!! Like when you did the green chevelle. So awesome to see talent at work.
@jreamsnyder
@jreamsnyder 6 лет назад
I totally stole the drill / wire twist method from you. Makes shit look so much cleaner. Thanks for cranking out the vids!
@andrewmcallister4151
@andrewmcallister4151 6 лет назад
jreamsnyder I been doing that a while now. Got it from a good buddy of mine. Neat trick.
@jafimbres1
@jafimbres1 6 лет назад
these videos are so satisfying to watch. thanks Steve. great work as always.
@robertessley8281
@robertessley8281 6 лет назад
Love this series, truck is coming along nicely. Great work as always.
@Mr2SMOOTH24
@Mr2SMOOTH24 6 лет назад
A Steve you know you be doing your thang on these installs you be doing. This one is coming along good. Can't wait til video 6 and the finishing touch video too. Thanks Mr. Meade
@WilliamSmith-qo6vw
@WilliamSmith-qo6vw 5 лет назад
I need a shopping cart and about 6 minutes in your garage to get some components for my system. Smh. Still couldn’t make it look as amazing as you do. Great work bro been watching you for years.
@Louellen100
@Louellen100 5 лет назад
Steve you be in there jammin bro I love your videos you inspired me to get back in the game and I build guns. Keep up the good work and keep the videos going you are the MAN!!!
@michaelgulley9286
@michaelgulley9286 6 лет назад
Love the vids and the work you put in. Thank you for sharing this project. .... and I use the term "project" lightly. Great work. "Like a BOSS"
@BenDover-eo2en
@BenDover-eo2en 6 лет назад
I've been waiting so long for this. I love these episodes. Great work man
@stevenbowles2068
@stevenbowles2068 6 лет назад
I can't wait to see the box!
@621ELECTRONICS
@621ELECTRONICS 6 лет назад
Nice and clean as usual, great work man! I can hardly wait to see more vids of this project.
@cnypyro1948
@cnypyro1948 6 лет назад
I did installs for 10 years back in the days... Even on a brand new Lexus we would get product within a week... this taking way too long! It’s excellent but taking time and space! Even for a friend ya gotta turn that register! Love your work! I would hope to be that good if I stayed in it!
@meade916
@meade916 6 лет назад
this is taking way to long? you have no idea what my day looks like. LMAO...You are straight up trippin'. Thanks for the last part though:D
@rhenaldobarnard
@rhenaldobarnard 6 лет назад
Dang it Steve! You keep drawing me in with these videos. I’m on the edge of my freakin seat every time one comes out! 😂😂😂😂
@colvilletribe2383
@colvilletribe2383 6 лет назад
Me too bro
@marksapollo
@marksapollo 6 лет назад
I love it, you look scared to do anything on this car haha. You’ve done a fantastic job on fixing it! It was one right mess of a car and system, surprised it hadn’t caught fire!
@mathewbecker7570
@mathewbecker7570 6 лет назад
Love watching your videos, I always pick up little tricks I can use from watching you do installs! For example using your vice and drill to spin the wires together! Clean AF!
@jamesmurray4312
@jamesmurray4312 6 лет назад
Best. Friend. Ever.
@jar1zxrcfun75
@jar1zxrcfun75 6 лет назад
As I just got my Q forms in today this was sweet! I got some sound deadener left and I wouldn't have thought to do this. Been watching your vids for years and finally got something you made. Three or the 4 fuse blocks and one of the 2 fuse block holders and a volt meter, I got to say nice job! Worth the extra $$$ over my old cheap single fuse holders.
@koolBOY8323
@koolBOY8323 6 лет назад
been loving this series man. some of the comments and trolls around here though. good lord. these guys need to get lives. killer work as always steve. keep it up man!
@dominator_6068
@dominator_6068 6 лет назад
I'm digging it bro it's coming together. Can't wait till the finish and the reveal. As always nice work brother
@bunky021543
@bunky021543 6 лет назад
Big Steve putting in work! Excellent work bro love the videos!
@PontiacsGarage
@PontiacsGarage 6 лет назад
Love the videos. Keep em coming. Audio done right.
@brianwatson3705
@brianwatson3705 6 лет назад
Never thought about using heat shrink to hold a wire run together. Thanks for the tip on that !
@Dad-jk2wd
@Dad-jk2wd 5 лет назад
Looks great!! Love the choice of music in background on the vids!
@davef.566
@davef.566 6 лет назад
Steve I love the fact that you are doing this for a friend at nc / also fuk the haters cause haters R going to hate :-) :-) :-) keep the videos coming we learn much from you
@TheBigWhopper420
@TheBigWhopper420 6 лет назад
OMG the CNC machine actually turned off for a change! Even just briefly!
@rickymerchant1
@rickymerchant1 6 лет назад
Wow all this time and effort for free, you’re the man Steve!
@lonniesouers5245
@lonniesouers5245 6 лет назад
Love the build and how’s its coming along. Your a great friend. I’ve always loved seeing people twist the wires together with a drill.
@daddyhammons9519
@daddyhammons9519 6 лет назад
Your work is Best of Show.. Much props..keep doin what you love😎😎😎
@hefty6147
@hefty6147 6 лет назад
I appreciate what you're doing for him but why didn't you solder and heat shrink your connections because that's what you're known for
@shawnsimpson5638
@shawnsimpson5638 Год назад
Love the playlist going in the background!!
@simple_man6264
@simple_man6264 5 лет назад
Awesome work man like u have said you don’t claim to be the best or an installer but I have not seen anyone from Tulare-Fresno area take as much pride and have the skill for that matter to even come close to do what you do.. one day hopefully i can take my 03 Sierra to you
@kevingilchrest882
@kevingilchrest882 5 лет назад
Awesome watching a build like this I love it man I live for this
@russ-nz6wk
@russ-nz6wk 6 лет назад
Good work Meade .... looking forward to see it all come together ....
@ryanhayes3632
@ryanhayes3632 6 лет назад
Awesome work bro and more awesome that your helping a friend for free...you're the man
@subculturenm
@subculturenm 5 лет назад
Amazing what some TLC can do for just about any vehicle. Nice work.
@07zx14White
@07zx14White 6 лет назад
Looking solid brother. Definitely looking forward to seeing the next episode.
@cantucki
@cantucki 6 лет назад
Great work. Haters gonna hate. Get loud
@biglooney3054
@biglooney3054 6 лет назад
Love your vids bro, and the talent u have. I can't wait to go back to Puerto Rico to do some work on my car out there, I only did motor & body on mine and with these vids I will definitely hook up a nice system in my baby, thanks big bro keep them vids coming with awesome ideas etc👍👍👍🤗🤗👌
@JRam-gg5uw
@JRam-gg5uw 6 лет назад
Lookin really good and professional i love your work bro
@208miuwu
@208miuwu 6 лет назад
Steve your heart is in the right place the big man high in the sky watches all of us. I`m sure all the haters will hate but that just shows the color of their heart keep doing what your doing and all will work out. Your calling in life is car Audio and your a miracle worker with it I could only dream of your talent. Some years ago I was in Afghanistan and was hit by a IED and we all walked away and from that blast that should of killed us, I have learned life is so much more and I make it a point to help people when they need it. God Bless brother and keep these videos coming alway a pleasure to watch and learn.
@christopherbadree3266
@christopherbadree3266 6 лет назад
Steve you a boss love the 80s music keep those car audio video coming bro
@dharding74
@dharding74 6 лет назад
I LOVE the music selection in your shop!
@demondferguson2157
@demondferguson2157 6 лет назад
Flawless work SMD from your boy Kadlac in St.Pete Florida
@DjKamikazee
@DjKamikazee 6 лет назад
Good work Steve giving you friend the hookup
@jbasslows3205
@jbasslows3205 6 лет назад
I love the background music your playing Steve very therapeutic 😉
@DVBin916
@DVBin916 6 лет назад
This is a historic moment! The first time I’ve ever seen you use crimping in an install! Always solder 😮. I get its 100% free but wire crimps !
@meade916
@meade916 6 лет назад
historic? i do this all the time. Never had one fail in my life. This ain't no T-tap. Settle down.
@caraudioetc
@caraudioetc 6 лет назад
I feel your pain Steve Wanting to put in decent 6.5s and prefab parts come designed for nothing bigger than 6” 😩 You do what ya can though. Good stuff.
@bigglefty75
@bigglefty75 6 лет назад
nice hook up your bud got - thanks for your videos, helps me remember how I used to hook up sounds. old school punch amps
@alanray2446
@alanray2446 6 лет назад
great work as allways ,, you are a true friend , keep doing you .. BASSHEADS FOR LIFE!!!!!!!!!!
@liltwin9013
@liltwin9013 6 лет назад
Perfection and professionalism at it's best
@southernoverdrive09
@southernoverdrive09 6 лет назад
Great video Steve. Install coming along great.
@ec5074
@ec5074 6 лет назад
Aye steve!!! love the shop dog bro!!! Awsome vid like always!!!
@shanemc5136
@shanemc5136 6 лет назад
Thanks Steve. this free job looks better than what I paid to get done in my car.
@crayonsvat121
@crayonsvat121 6 лет назад
Great job Steve good learning video on how to install Audio.
@shoecobbler08
@shoecobbler08 6 лет назад
Quality! This is coming out awesome!
@bigvell02
@bigvell02 6 лет назад
Clean, efficient, proper along with some Danish goodies.... nice hook up tuned in for more bucket o bass.
@gimmethecarkeys
@gimmethecarkeys 6 лет назад
Lookin fresh! Can't wait for the enclosure build. This guys has to be stoked on this. Not to mention his truck not going up in flames. Lol
@rocbola
@rocbola 5 лет назад
I put those same Q-form kick panels in my Suburban! They fit great and are super easy to use, but the small enclosure space lacks a little midbass. I am looking to put some 8s in the doors where the original front speakers were.
@gioarteaga3984
@gioarteaga3984 6 лет назад
Wow ,that's some good looking out right their Steve,can't go wrong love your work ,hay let's start the amp rack 🎛️
@Texas_Takeover
@Texas_Takeover 6 лет назад
I love how all the projects you do are designed with overkill heavy duty shit. You make sure everything is done right and never skimp on anything👍💯 definitely would trust you with my vehicles
@bigbabykirven
@bigbabykirven 6 лет назад
Man can't wait to check out your box and amp rack design, I know it's gonna be bad as HELL I've been watching you do this shit for years and have picked up allotta tips from your installs...
@joeanady6873
@joeanady6873 6 лет назад
This is gonna be a nice system when you're finished. Great work man,and doing it for the "homie hook up" just adds to you're credibility.
@tentativesky1698
@tentativesky1698 6 лет назад
“Just a little bit of tape” wraps whole wiring harness 😂✊🏻🤟🏻
@pvtstone77
@pvtstone77 6 лет назад
I have been runnign them HNC 6.1s for a few months now very underrated on the power specs can handle a shit ton and stay sweet and crisp.
@wadehensley5005
@wadehensley5005 6 лет назад
got that interior lookin like a new truck! Love those q-forms, they make life easier for those kick panels
@Pluvar
@Pluvar 6 лет назад
Awesome Setup Meade
@RussGame07
@RussGame07 6 лет назад
Steve do more of these videos, very informative, look how you do it
@meade916
@meade916 6 лет назад
ive been doing them for years...thanks!
@RussGame07
@RussGame07 6 лет назад
meade916 I'm from Russia, and I really want to fly to the USA and see you, and your workshop. I hope I will succeed.
@p.m.desertlife4426
@p.m.desertlife4426 6 лет назад
Great vids keep them coming 👍
@elliothunt3136
@elliothunt3136 6 лет назад
10:45 love it! Great way to neaten things up and reduce interference
@bradnaylor
@bradnaylor 6 лет назад
Always clean quality installs.
@2fast4all
@2fast4all 6 лет назад
It was a Dean (5 star car stereo ) moment when the tesa tape was busted out.
@13youngj
@13youngj 6 лет назад
Great work so far man
@maggiejordan2638
@maggiejordan2638 5 лет назад
really liking this series
@siggixxl
@siggixxl 6 лет назад
Cool Projekt ! I Love your Install Videos ! Greatings from Germany to SMD :-)
@str8upfune480
@str8upfune480 6 лет назад
Thought of building s box with plexiglass in the back seat of my truck where you could see through it out the back window and still use rear view mirror love the videos steve
@fucken.joseee
@fucken.joseee 6 лет назад
Awesome work steve!
@oldmenruleracing
@oldmenruleracing 6 лет назад
Can't wait to see it finished
@jimmydouglas7966
@jimmydouglas7966 6 лет назад
I love all u do with music i would love one day to come vist ur shop an see all u guys do
Далее
The '77 Yota Gets An Epic Sound System!
27:15
Просмотров 197 тыс.
INSANE TRUCK BREAKS CAR AUDIO WORLD RECORD?!?
8:11
Просмотров 1,2 млн
How LOUD Can We Make a Walmart Subwoofer Build? Part 1
18:49
Old School Car Audio Installs Compilation - Volume 1
9:43
How to fiberglass (kick panels)
7:44
Просмотров 774 тыс.