F600 cab flip - 1954 Ford F600 Car Hauler Build part 8

Подписаться 190 тыс.

Просмотров 26 тыс.

50% 1

My favourite tools;
Automatic adjusting C-Clamp amzn.to/3U91NoO
Magnetic Plug Weld Tool amzn.to/319COZh
Knipex Pliers Wrench amzn.to/3RKtl1m
Power Probe amzn.to/3NYjV10
Grinding respirator mask amzn.to/37rBpwt
Weld through primer amzn.to/2wLTwyM
Bead roller amzn.to/2JzFlk5
The Shrinker Stretcher amzn.to/2Zr7QWe
3 in 1 Sheet metal press brake/guillotine/roller amzn.to/31Jbe08
Become a Patron to watch the videos ad' free a day before everyone else
/ homebuiltbyjeff
Home Built Merch homebuiltbyjeff.storenvy.com/
Check out the Weldclass welders I use at www.weldclass.com.au/
Raceworks parts can be ordered here www.tiperformance.com.au/bran...
Find more Home Built by Jeff
/ homebuiltbyjeff
/ homebuiltbyjeff
Mailing Address;
Home Built by Jeff
PO Box 1520
Bowral, NSW 2576
AUSTRALIA
Music:
lukelukess.com

Авто/Мото

Опубликовано:

18 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@jrlittle2 Месяц назад

The truck is not in that bad of shape for being 70 years old. I'm 73 and I've had a lot more repairs than this truck needs. I'm really enjoying watching you turn this into a real hauler. Hammer away!!!

@HomeBuiltByJeff Месяц назад

Haha. Thanks mate :D

@bigmac60 Месяц назад

I’m constantly amazed at how bad the cab looks and how good it ends up. Well done Jeff

@Papa-Bogey Месяц назад

“The last 20% takes 80% of the time.”

@HomeBuiltByJeff Месяц назад

That is definitely true for the Alfarrari, but for the Frankenhauler I have only just started and it is taking ages :D

@davidburne9477 Месяц назад

The Pareto Principle…(kinda)

@tomthumb4767 Месяц назад

Your doing a great job replacing the bad and putting it back together like it's supposed to be. Great fabrication skills . Two Thumbs up .

@ronintres6757 28 дней назад

what a lot of work and it's great that even though you've removed a lot of metal you can still see the connection and put the parts you made yourself back as they were originally, really nice to look at 👍🏻🙂

@maxwellduncan6150 Месяц назад

"He who dies with the most tools wins!" 😁. Keep up the great work.🖖🤙

@AMLagonda Месяц назад

OMG you mean im going to be a winner one day 😯

@miketucker7466 Месяц назад

I love rust repair - it can be utterly soul destroying… but once it’s done it’s so rewarding!

@middle-agedmtbhack8298 Месяц назад

Really impressive to see the mess of rusty pillar base and floor turn back into something! Nice work.

@grantclaassens612 Месяц назад

That piece for the floor is incredible!the beadings lining up👌

@MarkoVukovic0 28 дней назад

Coming along nicely, Mr. Jeff! I always love seeing the new tool additions. When do you find time to eat, sleep and go to your day job!? Hope there's some time for date nights with Mrs. Jeff too 🤣

@mikemedic450 Месяц назад

Getting into the realms of using an English wheel. Put some pre-curve into your flat steel panel so when you bead roll you end up with a flat (ish) panel

@georgebettiol8338 Месяц назад

Agree. I recently learnt the technique courtesy of Fitzee's YT channel.

@rona1144 Месяц назад

Cool 1954 plate and Mrs Jeff history was interesting

@joeford4016 Месяц назад

Mrs. Jeff is always interesting.

@alman6581 Месяц назад

What a mission Jeff. But I enjoyed it ;-) Nice to see some of Chad's cut to form tricks being used. They work for me too, when I don't have the right tools in the first place - ugh.

@HomeBuiltByJeff Месяц назад

Chads?

@alman6581 Месяц назад

@HomeBuiltByJeff yeah Bad Chad on YT. He did a series doing a video a day for a month, converting an old sedan into a truck. He doesn't form anything traditionally only via cut n weld. Supreme skills

@HomeBuiltByJeff Месяц назад

@@alman6581 I will take your word for it.

@gcatwyo Месяц назад

Jeff, your fab skill are simply astonishing!

@MicahBell_1860 Месяц назад

Looking forward to the track day Happy trails, Cowpoke

@andrewmurton8379 Месяц назад

Loving the truck repairs, your skill level astounds me as it’s all self taught through the school of trial and error. Great video’s keep at it. 😁👍

@paulwhite7475 Месяц назад

You are getting quite good at this .

@johnandrews3568 Месяц назад

This... IS... awesome work Jeff.

@jimclarke1108 Месяц назад

Coming along just fine Jeff🛻

@temporarynoble 29 дней назад

Loving this new build

@paulallen1143 Месяц назад

Love your skills with metal

@grumpysgarage4387 Месяц назад

Really enjoying your videos. Great details not boring at all. The kind of videos I share with club members Cheers Dave

@FanatikBuilds Месяц назад

Masterfully done buddy! 💪

@HomeBuiltByJeff Месяц назад

Thanks mate

@peterpanx1 Месяц назад

This week's video. As always; great and informative! 🙂

@billmcintosh1242 Месяц назад

Great work, every repair is a step closer. Bill Mc

@AlsETypeResto Месяц назад

A little bit of stretching with an English wheel will help keep the panel from warping when rolling a bead. 👍

@KnLAutoDetailing Месяц назад

Well that was surreal. I thought if i was lucky i might see you wearing the socks in a later episode haha. Glad you liked them 😁

@HomeBuiltByJeff Месяц назад

haha. thanks mate :D

@daveprice9090 Месяц назад

No matter what the cab throws up. Your glass remains half full and your enthusiasm carries you through. It's great to see it all coming together. Still in hospital and enjoying your posts Dave

@S-T-E-V-E Месяц назад

Man you're doing a great job, I wouldn't know where to start on a job like that!

@modelmania825 Месяц назад

you should stretch in the place where you are beadroling before roling ,, that way you stretch enough to roll in the shapes without distorting the panel

@HomeBuiltByJeff Месяц назад

I actually tried that off camera with the planishing hammer but it didn't really work and I went back and saved the original in the end ;)

@georgebettiol8338 Месяц назад

@@HomeBuiltByJeff The technique of stretching by using the English wheel before bead-rolling was demonstrated by Fitzee's YT channel - a demonstration that involved the fabrication of 'ribbed floors' for his road/track Corolla named Crusty. The man is an exceptional artisan when it comes to metal fabrication.

@azharsyarawi Месяц назад

After a marathon of @yorkshirecarrestoration, I just can’t get enough. Thanks for being there @homebuiltbyjeff ❤

@DestroyerWill Месяц назад

Jeff you’re awesome

@deankdx Месяц назад

when i saw you putting the ribs in the floor(nice save with the kick stretcher) it reminded me of a recent video from Hackshop Garage titled Making Our Own FACTORY Boot Floor using ONLY basic tools - Gemini Build - Part 6. where they used an air chisel in an interesting way for a great result.

@tonytibbetts1272 Месяц назад

I've said this before Jeff but your fabrication skills are on point my friend. Keep the video's coming. Best wishes from the UK 🇬🇧

@johnnysmith863 Месяц назад

That section is quite a jigsaw puzzle. Great work as usual!

@chrisettenberger3190 Месяц назад

You do awesome work. Thank you for the videos!

@albegt98 Месяц назад

good job Jeff 👍💪

@AlexanderLarkin Месяц назад

Great, Jeff!

@MrJedrekh 23 дня назад

If I remember correctly, Eastwood made a movie and there is a trick to first stretch the metal on the English wheel and then do the rest on bead roller.

@stucooper4132 Месяц назад

Love watching your videos, awesome content

@TigerRogers0660 Месяц назад

Really loving this project Jeff. More than anything else you've done previously!!

@user-mu1sc3fb6h Месяц назад

Great work!!

@Tuscanvince 28 дней назад

Mrs Jeff is quite lovely 🤔

@DPCTechnology Месяц назад

Best restoration channel on YT, should have 5M subs,....

@1one3_Racing Месяц назад

As a plate collector myself, I'm envious of how easy it is for you!

@nickframe6743 Месяц назад

Thoroughly impressive panel forming in my eyes - this makes for a great watch. 🫡

@ewanstewart8011 Месяц назад

It’s a lot of work but it gives you a tremendous sense of accomplishment when it’s done to the standard you are achieving Jeff 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

@SaqibKhaliq Месяц назад

That’s a lot of work in one episode. I like the way you tackle it, one piece at a time

@timgosling6189 Месяц назад

Looking at how that cab is constructed with multiple metal sandwiches I don't think longevity was a priority. It's actually amazing it's lasted this well. And your fabrication work is just so good now; amazing work!

@vmoney9106 Месяц назад

Amazing work Jeff. I think your metal working skills have really opened up a lot of options for you in terms of projects, in that you can take on rustier projects that others wouldn’t touch.

@andrewdixon6078 Месяц назад

This part of the build is the best bit. Cut, grind, and weld! Keep it up! 👍🏻

@user-hq9rk7gg3z Месяц назад

You probably already know. But just in case use the planishing hammer to pre stretch the panel where you want to bead roll and when you put the bead in it will be flat good luck love the content thank you

@jeppenordfosskristensen7319 Месяц назад

Top job 👌🏻🇩🇰🇳🇿🏁😎

@AudreyH48 Месяц назад

The metal work is coming along so great! I love seeing all these intricate parts and how you've gone about making them. I'm slowly building up my courage for when I tackle my 1969 Mustang.

@JohnnyL20 Месяц назад

Great job Jeff

@HomeBuiltByJeff Месяц назад

Thanks mate :D

@E.T.GARAGE Месяц назад

Great Job Jeff, I can smell all that rust dust all the way here in the U.S. 👍😎👍

@hardnard55 Месяц назад

Amazing craftsmanship! You’re an inspiration to others who take on these huge projects.

@nandi123 Месяц назад

Your skill and attention to detail is extremely impressive and a joy to watch. Thank you.

@couttsy222 Месяц назад

Jeff, I've been watching HBBJ since the start of the Alferrari project and have yet to see you point over your correct (left) shoulder when you say "I'll put a link above". 🤣😂🤣😂 That's about the only thing I can pick on! Seriously, thanks for bringing your content to this channel for us to enjoy. Really looking forward to the day when you drive down the road with a (completed and registered) Alferrari on the tray of the finished Frankenhauler!

@ceesklumper Месяц назад

Glad you were able to save and use that piece, so frustrating otherwise. Looking great!

@HomeBuiltByJeff Месяц назад

This stuff definitely make me scratch my head at times, but I am learning and getting better every day which is the fun stuff.

@mackellmo1083 Месяц назад

Alot of progress, looking good!

@Datsman1971 Месяц назад

Mate, you can 3d print any profile rolls for your bead roller you want or need.

@HomeBuiltByJeff Месяц назад

They would be far too weak for the steel sheet unfortunately, but I could pretty easily turn up some on the lathe.

@Datsman1971 Месяц назад

@@HomeBuiltByJeff, ok, i use only 1mm sheat metal or thinner, so it does work for me. But lathe is much guicker than 3d printer, so yes, that is a good option. Petri

@dra911 Месяц назад

I think you're making pretty good progress considering the state of the cab! New planishing hammer looks good too.

@paulsabucchi Месяц назад

All hail the Mysterious Algorythm, ciao from Italy

@johngibson3837 Месяц назад

Hey up nice skills going on there mate cab is getting stronger every day

@williamholmes9129 29 дней назад

On another channel seen panels pre stretched with an English wheel prior to then bead rolling which seems to counter the distortion

@garysmith9985 Месяц назад

Nice progress

@jamesdeath3477 Месяц назад

Imagine it's a lot less finicky working with Ford truck tank metal, than Alfa grade thin sheet.

@matty74123 Месяц назад

mate with the attention to detail you put into this cab, you could do vintage Ferrari bodywork

@samperras Месяц назад

Just a little Schmuckle

@andrewbrown9460 Месяц назад

👍

@ChrisChandler-dj1wy Месяц назад

I'm so stealing "schmuckled"

@nicksrestos8505 Месяц назад

Another great vid from Jeff. I came across another incredible fabricator on YT down Jeff’s way. “Khaos Design” She’s building a Toyota Stout.

@HomeBuiltByJeff Месяц назад

She is next level!

@Nikoshasib Месяц назад

Jeff, I know car manufacturers have been doing primer dips to unibody shells since the 80s. Does anyone in Australia have a big dip tank for you to possibly get the cab dunked so that all these layer joints and pockets throughout can get some primer on them to hopefully prevent this in the future?

@georgebettiol8338 Месяц назад

When Ford built that truck they left many parts of vehicle unprotected - i.e. used zero paint, and it lasted a long time and most likely suffered the most degradation when it was abondoned out in the elements with a damaged roof. The restoration undertaken by Jeff will ensure that all parts of the body will be painted as per your typical current day vehicle restorer. In the Australian climate, whilst assuming the vehicle is not abondonned out doors, it will outlast Jeff.

@JeffHeck-sp2xd 29 дней назад

Do you find grinding better than sand or glass blasting?

@dennisbjones Месяц назад

Love your work Jeff but you couldn't find some new music to play on the time-lapse parts could you? I know every (I repeat) every note that is coming up ;-)

@b3nny90 Месяц назад

As someone who has never tackled this much rust, I'm curious why you cut odd shapes out and not just basic squares/rectangles etc.

@HomeBuiltByJeff Месяц назад

Tackling the rust and avoiding the more difficult shapes to make ;)

@oiygfdxssfgg Месяц назад

Great work as usual Jeff. What has happened with the Alfa, did it pass inspection.

@davidburne9477 Месяц назад

Nice knitwear Mrs Jeff. What brand is that?

@craig7393 Месяц назад

I have see people pre strech the panel before beadrolling (planshing the section to be rolled to make it more maluble

@philmunsel303 Месяц назад

Any Merch on the way for the FrankenHauler?

@HomeBuiltByJeff Месяц назад

I need to get off my butt and do something ;)

@jimidasaint Месяц назад

Maybe doing the rough side woulda made your life a bit easier since you’d have the better side to use as a ‘template’?

@HomeBuiltByJeff Месяц назад

Actually both sides are bad in different areas, but you are right in principal.

@linovieira5260 Месяц назад

That cabin is too far gone but good for videos

@danandyong6653 Месяц назад

We call it "buck forming" in America instead of hammer forming

@brucecoudrey1246 Месяц назад

A "schmuckle"?

@thinkdesignbuild8893 Месяц назад

Where did you find that face mask? Also is the respirator part of it?

@HomeBuiltByJeff Месяц назад

ebay :D

@88Frank Месяц назад

Its amazong because when you start i think there is no way you can save that and then step by step you bosh it out

@filepz629 Месяц назад

👀

@fabslyrics Месяц назад

A good rust sandwich....

@v4stroker Месяц назад

Hi Jeff check out Dominic Chinea hes building a Austin J40 pedal car and had to manufacture new boot floor with same problems

@stuartd9741 Месяц назад

Is Dominic still building the Porsche? Haven't looked in a while...

@1one3_Racing Месяц назад

Hey Jeff, a mate is coming up from Tasmania to WTAC in August. You going to be there?

@HomeBuiltByJeff Месяц назад

Yep.

@1one3_Racing Месяц назад

@@HomeBuiltByJeff sweet as! You can run the Roxster against Feras

@PortlyGibbon Месяц назад

Dude God spoke to me and said don’t do Patina…

@otherbasis8505 Месяц назад

Speaking of bad ideas... Since you'll be remaking the top of the cabin anyway... How about chopping it a couple of inches?

@HomeBuiltByJeff Месяц назад

I could but it is not the look I am going for ;)

@psk5746 Месяц назад

@@HomeBuiltByJeff4 inches then 😂

@JW-radelaide Месяц назад

Or raise it for storage and wind break for what you tow. I thought 6inches was normal.

@kevinhamling1963 Месяц назад

G'day Mr Jeff, A great video covering metal forming. Just looking at something, you don't realise how much can be involved in repulcating something. Your spot on in showing how to pick something apart rather than just cut it out. Q. I like that shrinker machine. Have you got a link to it, please? So, thanks for sharing ✌️ Peace from Melbourne/Pakenham.