Тёмный

Fairmont 7 - check valves and drill block dont call the cops 

Sloppy Mechanics
Подписаться 135 тыс.
Просмотров 8 тыс.
50% 1

I MISSED LIKE 2 MINUTES OF THIS VIDEO WHEN I EXPORTED IT
someone call the cops
BEARINGGGGGG
a.co/d/5KtGegd
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
www.sloppymech...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarag...)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeater...)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertune...
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-moto...
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperforma...)
Hughes Performance - (www.hughesperfo...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)

Авто/Мото

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@WhiteTrashMotorsports
@WhiteTrashMotorsports Год назад
I feel like we have been here before.
@94jimmy5
@94jimmy5 Год назад
Slick trick on the DOD delete. Kudo's.
@ryan.graham
@ryan.graham Год назад
Even though i watched it last night im still gonna watch the reupload lol
@SloppyMechanics
@SloppyMechanics Год назад
there is new hidden giblets
@wobblysauce
@wobblysauce Год назад
@@SloppyMechanics Nothing better then that 1 tap.
@Jonny_trans
@Jonny_trans Год назад
Blast air into that exhaust port and watch for bubbles
@grabasandwich
@grabasandwich Год назад
The things people think of! 😂👍
@GTPCarpy
@GTPCarpy Год назад
4th Gen Alternator bracket is geat for aligning where to drill the hole
@jackoftradesgarage
@jackoftradesgarage Год назад
Next time use mineral spirits instead of water. It's thinner than water and has less surface tension, which allows it to leak past smaller imperfections than water.
@scottgshomewrenching1352
@scottgshomewrenching1352 Год назад
I had the same thought
@jsomething2
@jsomething2 Год назад
of even brake clean
@grabasandwich
@grabasandwich Год назад
​@@jsomething2that would probably evaporate pretty quick tho?
@jsomething2
@jsomething2 Год назад
@@grabasandwich only gotta see it wet on the other side. I actually set the head upright on something, spray in the ports and let it soak for a bit. if that doesn't leak thru, nothing will.
@WhiteTrashMotorsports
@WhiteTrashMotorsports Год назад
I use gas
@hendo337
@hendo337 Год назад
One the street, 706/862 heads should be on every LS, I wouldn't hesitate to run them on a 6.2, the 78/75, S475/480/488 is going to present the power ceiling along with the fuel system as long as you are using Ethanol. Cam doesn't matter much, might as well go huge and go with an intake that kills some tq if you're not using a TBSS...get wacky out there...3 455 pumps, 160 or 210lb injectors.
@notperfectgarage4595
@notperfectgarage4595 Год назад
Hey Matt looks like my garage. Lol With 3 kia souls. Motor issues of course
@peatergriffin
@peatergriffin Год назад
Beautiful
@Burndown
@Burndown Год назад
I guess you could say it’s hammer time
@masoncampos7043
@masoncampos7043 Год назад
Who knew it was the crickets mating call?
@oddballfactor4307
@oddballfactor4307 Год назад
Man DRIVES metal into FRESH engine you won’t believe what happens next WTF
@jimhiscott2918
@jimhiscott2918 Год назад
I would have put some red loctite on those pins
@MrJakethehouse
@MrJakethehouse Год назад
Where are they going to go?
@SloppyMechanics
@SloppyMechanics Год назад
Through the aluminum plate I guess
@jimhiscott2918
@jimhiscott2918 Год назад
@@MrJakethehouse I don't know. To be completely honest I know nothing of the LS. It was just a thought
@jimhiscott2918
@jimhiscott2918 Год назад
@@SloppyMechanics lol. I'm a LS dummy my friend. I didn't know. Sorry about that
@TheBrokenLife
@TheBrokenLife Год назад
Planning to look at the old block at all to see if it's damaged somewhere or just heading into the future with your hair on fair and the mirrors torn off?
@BlaserBuilds
@BlaserBuilds Год назад
Eyyyyyy
@heavydutyroadsidellc920
@heavydutyroadsidellc920 Год назад
been doing the bearing trick for years
@SloppyMechanics
@SloppyMechanics Год назад
Keeping secrets
@jesscneal
@jesscneal Год назад
I ordered a bearing off eBay after your first upload :D
@riddler983
@riddler983 Год назад
How much was it?
@jesscneal
@jesscneal Год назад
@@riddler983 $14 shipped
@daviddavis1322
@daviddavis1322 7 месяцев назад
I'm dumb. What's the extra tapped hole for? Did you align it with the bracket while the head was still on?
@brandonrohrer7914
@brandonrohrer7914 Год назад
If you have the valley cover with the o rings why do you need the plugs ?
@SyTySpeedShop
@SyTySpeedShop Год назад
Why put the plugs in, when the stock LY6 cover already blocks them off with o-rings?
@chester.thefield
@chester.thefield 9 месяцев назад
would this sorcery work on aluminium?
@MrGuvEuroman
@MrGuvEuroman Год назад
I’m phoning the police
@nobodynoone2500
@nobodynoone2500 Год назад
Whoop Whoop!
@davidreed6070
@davidreed6070 Год назад
What do you do about the LS3 chamber being wider than the bore of the block. The air coming into the chamber then hitting the ledge of the bore on the 4 inchbore is not good. I bevel the block but it would be better to jog the head about 0.35.what do you say.
@1stamendmentsupporter
@1stamendmentsupporter Год назад
You do nothing. Those heads were assembled to the LY6 block from the factory. Sloppy Mechanics aren't fixated about insignificant things.
@davidreed6070
@davidreed6070 Год назад
@@1stamendmentsupporter a mismatch between the chamber and cylinder on the chamber side is insignificant. That could cause the 3/8 inch boil at high lift
@wayneg1197
@wayneg1197 Год назад
🦗🦝
@beecj0
@beecj0 Год назад
just below flush then peen the edge inward.
@gedavids84
@gedavids84 Год назад
Why do you plug those holes if the cover has o-rings?
@Rhett.Castillo
@Rhett.Castillo Год назад
There is still potential of a slight pressure drop using only the orings
@gedavids84
@gedavids84 Год назад
@@Rhett.Castillo It's a precision o-ring seal, it shouldn't leak at 50-100PSI unless the o-rings are wasted.
@Rhett.Castillo
@Rhett.Castillo Год назад
@@gedavids84 I've personally experienced then leaking. Especially if the surface has a ding or scratch.
@johnnicol8598
@johnnicol8598 Год назад
@@Rhett.CastilloThere is also the potential of leaving all manner of stress in the block by hammering steel wedges into it.
@TheBrokenLife
@TheBrokenLife Год назад
@@johnnicol8598 We've been press fitting dowels into cast iron for centuries and rarely is there ever an use. Judging by the size of the hammer and the amount of swing, he's not going to hurt anything.
Далее
363ci aluminum 5.3 summit stroker finished!
12:46
Просмотров 66 тыс.
Avaz Oxun - 10 yillik yubiley konsert dasturi 2023
2:52:33
gold lite - the new micro mini ms3
5:05
Просмотров 11 тыс.
How to inspect your junk yard LS
17:12
Просмотров 63 тыс.
Assembling My Dodge NASCAR V8 (Part 2)
15:01
Просмотров 2,9 тыс.
review - Vevor steering endoscope
10:35
Просмотров 3,6 тыс.
Crusty 4.8 prep for new edge
5:33
Просмотров 6 тыс.
The Best LS Camshaft By Sloppy Mechanics
7:20
Просмотров 24 тыс.
Подстава с HYUNDAI Solaris
0:59
Просмотров 257 тыс.
Она снова у меня эта мразь🔥
0:36