FAST Removal Of MAJOR Imperfections On PAINT! This Is What Was Used!!!! 

Farécla products | Surface Finishing Specialists are certainly not bad. Whether it scores better than Sonax? Personally and purely personal, I see no reason to prioritize this brand. On the other hand, someone who has learned to work with Farécla will have found his niche in this. Here in Belgium this brand is less known, 3M and Sonax can be found everywhere. In addition, Nanolex, Poorboys, 3D etc. Still a nice upload.

We like them in europe. They also have upgrade the G3 to G3 premium witch is step 1 plus step 2 on one.product according to their numbering on their product line. I suppose something like 1 step like sonX 05-05, koch f6 e.t.c Maybe you like it if it is available.in usa

I personally found that Roar920 cut's the fastest and leaves the best finish after removing peel with 800, but make sure you keep it wet, otherwise it burns FAST & DEEP into the paint.

I would like to know what kind of wool pad you are using thank you.

Looks like a good system. I would use it for a vehicle that has a terrible finish. I love products like this and I appreciate your knowledge.Thanks Brian ✊

Hi Tim

@@kimnewling5728 hey Kim!

That is what we use it for.

The combinations are also figuratively endless. Various pads, machines, etc. A quick calculation is shown below. With which we can state that there is no conclusive answer or solution. Elements to choose from: 8 Elements chosen: 2 Number of variations: 56

He could telle me two ways to Sunday that he's an "ex detailer". Saying b.s. like that proves he wasn't worth his salt.

If I stop and load up the pad again after 60 to 90 seconds...I have no dusting.

Right on!! lol

It is up there with them in the top 5.

Menzerna 3800 whit Finishing Pad ( Maguires black Pad)

Sounds like two separate issues. What do you mean by scratches left behind? Are you talking deeper stuff not fully removed or is it not even removing swirls? Either way that usually means not enough cut. If even swirls aren’t coming out, you need to up your cut. Turn the polisher speed up, slow down your arm speed and use a bit more pressure. See what that does. The rupes pads are fine, you can stick with those. Really deep stuff is usually a wet sanding job, and unless you’re *positive* you have plenty of clear left, be very careful how far you go with those. You’re also leaving haze behind, which can mean the polish doesn’t have enough cut to clean up after the compound, but it means it’s not finishing down well in some fashion. That is often due to softer paint. Are you working clean? Are your towels and pads fresh and clean? Are you cleaning your pad after every section and/or changing pads frequently? Working clean and residue control is a huge factor. Toyota paint can sometimes be soft and finicky. Are you using the yellow or white Rupes pads? If you’re using white, try the yellow first, see what that does. Some soft paint actually finishes better with a stiffer pad. If you’re using yellow, try the white first. Try yellow then white. Try using more polish, try using *much* less. Try doing just a single pass instead of several. You have to find what makes the paint happy. The Rupes liquids aren’t the absolute best, but they definitely work.

If the ones you bought are working....stick with them.

I think so too!

I answer all questions....just not one at a time. I run a few businesses as well. Dont have time to stare at a computer all day. :)

I appreciate the time and knowledge you share freely with the world and have no idea how you manage everything. But you do it well, and you do respond. Thank you and best always.

I am honestly not the biggest fan of their polishes....I do like their pads however.

Quicker cut...but shorter cycle time.

Not quite as aggressive ...but absolutely.

My lens was dirty...Check again when measuring gloss.

Yeah. I use that and also Cut and Finish, NP 03-06. The Sonax NP, besides a great cut, leaves a gorgeous gloss!

@@as680783 - Those were my favorites from the Sonax line.

3rd speed setting.

Sorry to hear that. I had no dusting as I blew off the pad and loaded it up again every 60 to 90 seconds.

@@apexdetail85That is nice. I used this product 6 years ago. They might have upgraded their product. I was very excited when i bought this product. I used it and disappointed. But once again that was 6 years ago.

I’ve been adding a bit of Xtreme Solutions lvr ice to my m105 to cut down on dusting and increase cycle time while I finish the bottle off. I’d give this a shot if you want to use up the old product.

Top 5.

@@apexdetail85 oooo what are your top five I know Sonax cut , 3d 500 xtra cut what are the other ones

To cut? Or finish?

@@apexdetail85 both please

Any pad will work if you have experience

You can correct with hand lotion with the right pad. Efficiency and speed is what I am referring to.

2.2 pounds for $65

Putin bot.

@@as680783 😄Who you?😄