Polishing And Paint Correction Made Easy With These Simple Steps!!!

Подписаться 249 тыс.

Просмотров 157 тыс.

50% 1

Your cars finish can look FANTASTIC with these simple steps!! This video shows how to remove swirls, scratches, oxidation, and many other imperfections from the painted surfaces of your vehicle. I will make it easy and show different combinations that are effective on soft clear coat, hard clear coat, and medium clear coat. YOU CAN DO IT!! I have faith in you! Have fun making your car or truck look incredible!!
Griots Garage G6 Polisher....www.amazon.com/s?k=griots+gar...
3D One....www.amazon.com/s?k=3D+One&i=a...
Urofiber Pads...www.amazon.com/s?k=Urofiber+p...
MaxShine M8 Polisher....www.amazon.com/s?k=maxshine+m...
Buff & Shine Foam Pads.....www.amazon.com/s?k=Buff+and+s...
Turtle Wax Hybrid solutions Polish And Wax....www.amazon.com/s?k=turtle+wax...
Bauer Polisher (Harbor Freight)....www.harborfreight.com/6-in-57...
MaxShine Polish Pads.....www.amazon.com/s?k=MaxShine+P...
apexautodetail.com www.apexautodetail.com/
#apexautodetail #polishingpaint #autodetailing

Авто/Мото

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 329

@apexdetail85 4 года назад

How many of you are on the fence about polishing your own car?

@garyclark24 4 года назад

I am, Ive been working up the courage to try it all winter long!

@ejg34 4 года назад

I jumped right in to it after watching several videos. Used a harbor freight to do my first time. Liked doing it so much I went out and bought the g8, g15, and g21. Then the Dewalt dwp849 to learn the rotary on test panels. Then I got the cheap spta to get in to tight spaces like on my motorcycle

@rondail5675 4 года назад

I'm going to do it soon as the weather gets in the upper 50's. I am going to use Turtle Wax Ceramic Hybrid Polish & Wax. I bought the Bauer 64529 last week for $59! I am going to do a light 2 pass like Brian shows and use a blue-pad. My black Corvette is pretty good looking except it seems to have haze, needs a little cleaning and pop. Thanks Brian!!!

@mattmerwin3842 4 года назад

I've done a few now. It's a very satisfying feeling to the end result. I did struggle with a Griots garage 15mm constantly stalling out on a semi I was working on. I would like to get a different 15mm polisher.

@WillieBeW3 4 года назад

Working up to using my new Makita XOP02Z DA polisher. Just making sure I have enough information (and time) to polish my black car properly...

@robbrollinger2856 3 года назад

You are SO right about “once you try it, you’ll be hooked”! I went the Harbor Freight/Hybrid Solutions route and I’m loving the results. My car, wife’s car, both daughters cars and mother in laws car they all look great. The Hybrid Solutions products along with your videos gave me the confidence to try and I’m so glad I’ve learned to invest some time into polishing, protecting and improving the look of our vehicles. Thanks for sharing your talents through these videos.

@dcasandman 4 года назад

Missed my nightly fixed, good to see you’re back, hope you feel 100% soon

@andrewcrouch30 4 года назад

Great video as always and very informative even for someone who’s been a big fan of your channel for a number of years. Keep up the great work Brian 👍😀

@tombotkin2171 4 года назад

Great job once again! Always appreciate you sharing your knowledge with us!

@60trickpa 4 года назад

AWESOME!! Welcome back sounds like the show was great. Thanks for this great video

@gipstetz6720 4 года назад

Wow!! Super helpful. Thanks for posting Brian.

@pwrshots 4 года назад

I was strung out the past couple of days. however, glad you took some time off and attended the show. great vid as always.

@codygutierrez2373 4 года назад

Thanks to you ive been motivated to detail and i live in an area where it is non existent.. i work full time as a cdl driver and on my free time ive been detailing and people took notice quick! 👍🏼

@edwardbodenmiller6846 4 года назад

Welcome home hope you had a great time and feel better soon. I also missed my nightly fix.

@danlc95 4 года назад

Excellent demonstration, and tutorial, Brian! Excellent for those curious about polishing their paint, who never have before.

@carlosorengo1809 4 года назад

Excellent video Brian you just answered what I was going to ask. It cannot get any better than that explanation. Thank you

@acts2211 4 года назад

Extremely helpful video. Thank you for the Post Brian.

@Ragnarok1881 4 года назад

Never believed in magic till I've seen your work, Prof! Executed each panel perfectly.

@AARON30c 4 года назад

Another fabulous video buddy. Perfect for the DIY guy or newbies into detailing. Euro pad and one correction cream are awesome 👍🏻👍🏻

@rand49er 2 года назад

Brian is very easy to listen to. He shuts up for a bit allowing you to absorb the information. Thank you, Brian, for your excellent advice.

@elilee9112 4 года назад

Brian; Much respect for your desire to share your PRO tips.

@chikage6414 4 года назад

This is exactly the kind of video I needed when I started doing my own paint corrections. Awesome job breaking down the interactions between pad material, liquid, and clear coat hardness. Super easy to digest, not a word was wasted.

@pawesoko1571 3 года назад

Thank you Brian for the knowledge you share with us. You explain polishing so well and I've already made 8 cars and the results are great. friends are happy, so am I. Greetings from Slovenia

@davenewton1570 4 года назад

Hi Bri you have so much knowledge on pads & polish amazing

@michaelcunningham1364 3 года назад

Great video. I liked all the examples and especially the explanation of the hardness of the clear. Thank you.

@michaelwilliamson6061 4 года назад

Thanks! A great video . You are pushing me off the fence for sure.

@brianmiller3349 4 года назад

Great video Brian. Glad to see your back. Like other viewers mentioned I was going through withdrawals missing your mail calls and other vids.

@kenmei18 4 года назад

How funny, I have 3d one and uro 50/50 pad on the way from amazon already and just found this video. Glad to see my purchases were decent choices. Thanks!

@mynsxt6 3 года назад

Every-time I see you use this pad with 3D One, I get goose bumps on how great a finish it leaves behind!!!!

@kbstoy1913 4 года назад

Again THANKS from this weekend warrior !!!! Missed your videos in the morning with my coffee :)

@allancastro7508 4 года назад

Great video. Thanks sir for this tutorials, im learning a lot!

@andrewkb5211 4 года назад

Thank you so much! Really helpful that you named what products to use. 🙂👍

@lundahlx2 4 года назад

The sound is way better now than before christmas. Great video as well.

@ulyssestinajero4494 Год назад

I give this a 10/10🙌🏻🙌🏻 awesome on explaining the steps and breaking everything down easy

@callmedwalls 4 года назад

This was a great help. thanks!

@davestewart9146 4 года назад

Perfect video, thank you Brian 😁👍

@Dopboyfreshh 3 года назад

Amazing video thanks for reviewing different DA polishers, pads, and compounds/polishers, please do more

@rambladesmanmoe6291 4 года назад

Excellent video. Thank you !

@intothedetails1972 4 года назад

Such great advice packed into 13 minutes 👍

@norcalspitshine9067 4 года назад

Glad you're back.

@emjr114 4 года назад

Awesome, definitely motivated me to do my 04' jetta!!

@jc4074 4 года назад

Another fantastic vid. I'm looking forward to you're demonstration of the LVR 404. 👍

@petercraggs2431 3 года назад

Great video, gives me some confidence to try it on my '92 190E!

@paulhamilton6013 4 года назад

Simple honest no nonsense advice 👍

@josephsanchez8477 4 года назад

Great video. Very informative.

@neilwalker5041 2 года назад

I have been using a waterless wash in a foam sprayer but using a dozen or so microfiber towels gets old. There are so many good rinseless washes out there I will order a sponge and a wash. Most important thank you for sharing this video and educating me and the other viewers. I am definitely grateful!

@sylvainmarier4818 4 года назад

Again another great video Brian !

@jamesbiedlar590 4 года назад

Great tutorial!!

@perfectcardetailmumbai738 4 года назад

Nice sir Great work Great combination of pads and compounds

@greganderson5981 Год назад

New subscriber. Really appreciate this video. All your content is down to earth and very instructive. Thank you.

@restorationmobiledetailing582 4 года назад

Welcome back , looking for your sand blaster video i just picked one up

@3237fish 4 года назад

This has been a huge help for me making the step towards doing my own vehicles. Thanks for the great demo and information!! above and beyond as always. Keep 'em coming, love your content.

@ShineYourLightDetailing 4 года назад

Way to go showing people the simple ways to shine their paint, Brian. :-)

@mikeyp2447 4 года назад

Great video!!!

@johnomahoney7755 4 года назад

Love it Thanks!

@albertchavez431 4 года назад

Amazing 🙌🏽

@ptheledge5390 4 года назад

Great video my guy! 👌🏼

@kevintaylor1202 4 года назад

Hey sir , I love your feed back and videos!! Your awesome And people love ho honest you are!!!!! Can you do us all a favor and do a video on the SPS Graphene coating, longevity, application process, and Gloss readings ! Very grateful for all you do!

@apexdetail85 4 года назад

Kevin Taylor I shall look into it.

@vladhyppolite9352 4 года назад

THANK YOU for this video.

@MNpicker 4 года назад

Awesome vid!! Well said👍🏼

@tadeloach22 4 года назад

Good stuff as always!!

@autoglowrangia3120 3 года назад

Thank you sir for gifting this video

@robertspreitzer8126 4 года назад

Oh mines getting polished and corrected just need to get a practice panel, and purchase some more pads. I decided to go with 3D one, Polish Angel master sealant, and carnauba arts for a topper. Also using the Lake Country HDO pads.

@joepoe8861 4 года назад

Great vid. I feel this was a very informative video. You answered a few questions that were running around my head. Also you show that you don’t need to have the most expensive equipment to do good work. Brian, I would like for you to clarify one thing. Do you go through a bunch of pads or do you clean them enough where you are only using three or four pads per car(mid size car). Thank you

@jessjessee1911 3 года назад

I love the Euro Fiber pad and 3D one combo

@henryfreeman6113 4 года назад

Welcome back sir!!

@D18.21 3 года назад

Love your channel. I recently became a weekend warrior and would like to move toward correcting some dealer installed light scratches on a 2019 subaru. The video is a little over a year old and am curious what would you recommend today for a DA polisher, compound, polishing compound and importantly the pads you would use. Thanks again and hope you continue to do well. Best!

@larryd2806 4 года назад

APEX DETAIL!!! Absolutely brilliant advice and many thanks for all of your incredible videos. Question on soft paint (2013 WHITE LEXUS), would a troq22D paired with Lake Country 5.25" One Step Light Cutting Microfiber Pads and Meguiar’s DA Microfiber Correction Compound work well? Would polish with same DA, Lake Country white heavy Polishing CCS Foam Pads and Sonax Profiline Perfect Finish? The car has never been detailed since I've owned it for 3yrs, mostly light to moderate swirls and some medium scratches. Again, thank you for all your hard work and educational videos.

@bigd9848 4 года назад

Test panels are a must for everyone. I can’t tell you how many I have gone through. I still from time to time get them and use them to practice on different types of imperfections.They are great for practicing wet sanding and polishing. You can watch all of the videos from the playlist and you can’t get better training and information.Thanks Brian as always ✊💎

@calliew311 2 года назад

What do you mean? Like the panels he had in the video? You go to a pick and pull or junk yard?

@bigd9848 2 года назад

@@calliew311 yes the that’s what I mean the junk yard or body shop panels. I meant also his channel has a world of knowledge.The past videos are something anyone can go back and learn to do a lot of things. I know Brian is a great top detail expert.

@williamwade7059 4 года назад

I went with the maxshine setup, uropad and turtlewax product. It was fun, but that Ford Escape has plenty of sharp angles and tough areas to get to.

@streettunner 3 года назад

Great way of explaining all the different tupes of pads and compounds..1 question I bought all of the 1st set up you showed but do I need to wax the car after using the 3D one ?

@FranzJx Год назад

He makes it looks so easy…

@KD0LRG 4 года назад

I use 3D 1 on tail lights that are not near perfect from the parts yard before I resell them. It will leave swirl marks but I will then hit it with a nice all in one and it makes them look great.

@solomon8864 4 года назад

Welcome back😀

@chrismurphy783 4 года назад

Welcome back. Glad you were able to get away for a few days. Great video!

@chesterowns 2 года назад

Once again, thank you.

@mykedago655 4 года назад

Great video! Thank you. I bought a dark blue 06 Scion tc and it has a 50' detail aka looks great from 50' lol but up close it's very swirly and minor scratches. I bought the Griots polisher and orange, yellow, black and microfiber pads, also several brands of polish and sealant. After watching your video I'm certain now I can start with Griots products. I'm hesitant to get started because the clearcoat is peeling off on the top of the rear bumper and a few small spots on the pillars. Would this car be considered to have soft clearcoat? If so, which color pads should I use to cut, polish then seal? 1 last question, how do you feel about cordless polishers? I live in a area that has dirt driveways and no garage. I'm looking at the Milwaukee 20v 5 ah. Thank you in advance Myke

@scottpunswick5051 4 года назад

Thanks Brian..

@kimnewling5728 2 года назад

Hooked? Boy am I hooked!

@Jesus-qn4yh 4 года назад

Your a beast bro, thank you

@kimnewling5728 3 года назад

Oh man I got hooked. Geeewizzzz

@markyrizzo2283 4 года назад

Brian, man I got busy with the eurofiber pads this past weekend with one. The working time, in love, I mean I’ve never found such a product yet. 3D one and those pads are amazing. I can even finish with 3D one and a polishing pad for that extra bling

@apexdetail85 4 года назад

MMA-RKY absolutely!!👍

@peterjurenovskis5933 4 года назад

Another great vid Brian. Can you expand on how you get into the smaller nooks and crannies eg. rear louvers, intake fins etc (equipment and products)? Keep up the great work!!

@apexdetail85 4 года назад

Peter Jurenovskis smaller polishers down to one inch backing plates. Sometimes even by hand.

@abduljohn9895 Год назад

Thanks 😊

@TedSchade88 3 года назад

Brian, your videos have been extraordinarily helpful. We appreciate all the time you put into this. You typically talk about clear coat corrections, but some of us amateurs are working with single stage paint. I am getting ready to tackle a 2008 MINI Cooper with Chili Red and white single stage paint. The paint is in pretty good shape, it’s just a 12-year old car that has the various moderate scratches and hazing that comes with a car that old which has never been corrected. I use the Turtle Wax ceramic line of products to maintain shine, so I am leaning toward the TW polish/wax. I have the Griot's G9 machine. What pad(s) would you recommend? It’s my wife’s car and I’m willing to put a couple of stages of correction into it to make it nice. Thanks again for all the knowledge you pass on.

@betteheadbettehead4800 2 года назад

How did you know it's single stage paint?

@davemichaud2739 4 года назад

So I just used Mequiars 105 ultra cut. Removed swirls really well,with a nice shine. However,I still have some micro scratches looks like

@aaronrasing2710 2 года назад

Hi Bryan, do you have a video of paint correction in preparation for ceramic coating?

@trd3786 4 года назад

Can you do a video showing how to use a random orbital da polisher like the Griots 6 inch, I’m having trouble keeping the pad from stalling so often. I always hear there are techniques to keep the pad stalling, would you show us some of those techniques please? On flat areas it’s fine but when there are curves and edges that’s where it stalls a lot. Should I buy a smaller da like the Rupes 75 e mini or the swirl killer or the nano or buy a force rotation like the Mille or 3401?

@Thamac15 4 года назад

Anyone else like to see him pop off a laugh every now and then? Have we ever seen him smile?

@chrissemsch8781 3 года назад

I bet he would laugh if he saw me polish

@biffick99 4 года назад

I'm just wondering what adverse effect, if any, screen wash solution has on a wax / ceramic finish on the paintwork?

@WhoDater83 3 года назад

Choosing the right setup is a bit overwhelming not knowing the clear coat thickness. Would it be easier to buy the cheaper of the polishers, several pads and polish or the more expensive one, pads and polishes? Side note, I'm super excited to get started! Thanks for the awesome content!

@lopo200909 4 года назад

AMAZING SHOW, HI FROM MÉXICO

@nortenjoseph7976 3 года назад

Nice sir

@cl-audio322 2 года назад

Thanks for the video. When you are done using the 3d one, do you need to use some kind of paint prep after to then apply a paint coating?

@coryray8804 4 года назад

Had good success with my 7 inch Rotary Polisher with light speed with Megiuers Ultimate Compound using a Lake Country Medium Hex foam Cut Pad Orange color . Then going to Turtle Wax Hybrid Polish using Lake Country Hex foam White Polishing Pad . Came out with good results , anyone else try this process with a Rotary ?

@stephenchampagne5763 3 года назад

I have a 2010 maxima that has scratches and swirls I believe owner before me was trying to prep it for plasidip or wrap don’t think they knew what they were doing but do you think I could get them out with these techniques you’ve provided here

@robertgargano342 3 года назад

Apex is the best!! Duracoat Technology should take a class from Apex.😄

@vc2616 3 года назад

Hi great video can I use a Bosch orbital sander ?

@hiiipowerbass2337 3 года назад

@ apex, where can I find more info on doing the whole car area, specificalle non flat surface areas?

@junovue 4 года назад

have you already made a video that's specifically for pad and product combo for soft, med, and hard levels? i think a video dedicated to just that on what you would start off by doing would be super helpful.

@kingkangjoe 3 года назад

This is pretty late but in another video u suggested doing paint enhancement before paint correction. Do u still suggest that or could i do what u did in this video? Im planning to buy a Griots g6 with a 6' and 3' backing plate. Paired with lake country ccs foam pads. Was planning to get Meguiars 105 and 205 for a one step on my moms car and my car. Both have dark gray cars. 2015 honda civic and 2008 acura mdx. My moms car has a lot of scratches and swirls and its never been detailed before. My car has scratches and swirls but nothing too crazy and also never been detailed only washed and waxed. Any extra trips u could recommend? Love ur videos, giving me confidence to do polish my own cars!

@markjordan1624 2 года назад

I have a black 2022 Honda Accord. Just got it like a month ago. Didn’t realize the dealer sent the car through the car wash that wasn’t brush free. Saw a lot of swirls a few weeks later. Wanted to know which process should I use for the pain correction and bring it back to show room shine minus the swirls and light scratches. As in what machine, pads and polish I should use. Thanks for your help.

@phf1179 4 года назад

Was going through withdrawals these past evenings. Watching other channels aren’t quite the same. This video encourages me to buy the Harbor Freight polisher to add to my arsenal of polishers. Started out with the Porter Cable 7424 which is now converted to a 3 inch. Then bought the Torx 15 mm. What the heck, can’t go wrong for that price. Thanks for the recap.

@abduljohn9895 Год назад

Good 👍