Ferguson FE35 Grey and Gold Restoration Part 11 Fitting the Axle Housings and Diff Center

Подписаться 50 тыс.

Просмотров 24 тыс.

50% 1

As the title describes in this video I replace the trumpet housings and the diff center.
Parts seen in this video can be purchased from.
www.queenslandtractorspares.com.au or call 1300 850 097 in Australia.
If the parts you need is not on our web site, Ph1300 850 097 and talk to us directly.
or
E Mail: info@queenslandtractorspares.com.au
or
Worldwide, www.sparex.com/ and look for a dealer in your area.

Авто/Мото

Опубликовано:

19 июн 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@AmateurRedneckWorkshop 6 лет назад

G'day Lance. You are moving right along with the tractor.

@BundyBearsShed 6 лет назад

G Day Harrold, Yeah I got a good run on it last weekend. Sanding coming up so things will slow up for sure.

@terjer8069 5 лет назад

Thank you for helpful videos,I overhauled my diff in aTEF 20.It went very well.

@BundyBearsShed 5 лет назад

Thankyou, Im glad it helped.

@ShainAndrews 6 лет назад

Careful... you keep going at this pace you will have a restored tractor on your hands

@BundyBearsShed 6 лет назад

Yeah these videos are all from last weekend, it will slow up with sanding coming up.

@BleuJurassic 6 лет назад

the only time I use gasket goo is watered down with some thinners on water pumps that dont like to seal you only need a film of it for it to work not in gobs of it and work quickly so it works as a sealer, or get things remachined to fit ! grins

@BundyBearsShed 6 лет назад

Yeah no need for it most times. boy do we see some messes from the silicone products.

@anthonygostling 6 лет назад

I always have used oil on the gasket, with no problems, but that just me..!

@stevecallachor 6 лет назад

When r u going to do the PTO SHAFT, it looks like the dogs been pissing on it!!! Steve Callachor North Avoca. N S W

@BundyBearsShed 6 лет назад

G Day Steve, Yes very soon, the bloody dog must have a shifter to pee on it as it lives with the cap on.

@marcellorussotto8287 3 года назад

Hi Lance, i have a question for you, i have an MF35x, can i use a 15/40 trasmission olio in the gearbox ?i use it for shredding and plowing! Thanks and sorry for my english!!!😉

@BundyBearsShed 3 года назад

Yes you can

@marcellorussotto8287 3 года назад

@@BundyBearsShed thanks 👍

@workwithnature 4 года назад

What type of iron is the casing?

@BundyBearsShed 4 года назад

Im not sure I always thought just cast iron.

@frankcurran6149 4 года назад

hi lance removed trumped housing to replace lower bolt for linkage and found a bolt missing from crown wheel have looked every where and used a magnet around every and cant find it wondering have you came across this problem bbefore and if so where did you find it. any help would be great wonderful regards frank love your videos

@BundyBearsShed 4 года назад

They often come loose but it is usually still there from what I have seen.