No video :(

‪@FeulingParts‬

Подписаться 66 тыс.

Просмотров 67 тыс.

50% 1

@FeulingParts cam chest install on a twin cam 88" thundermax tune how to Kruesi Originals
PATREON
WIN STUFF HERE AND LISTEN TO OUR PODCAST Patreon.com/use...
We are kruesi Originals, We specialize in high performance harley davidsons, custom builds, aftermarket parts, stunt riding, road racing and all around goofy $hit
@LegendSuspensions @saddlemenusa @LawTigers
New episodes every Thursday at 6:00 AZ time.
Edit Jake Hinke
EVERYTHING YOU NEED⬇️
www.kruesiorig...
ATV handlebars www.kruesiorig...
BRAKE ROTORS www.kruesiorig...
FLOOR BOARDS www.kruesiorig...
Skynet wheels
www.kruesiorig...
CV carb mod
www.kruesiorig...
PATREON
WIN STUFF HERE AND LISTEN TO OUR PODCAST Patreon.com/use...
We are kruesi Originals, We specialize in high performance harley davidsons, custom builds, aftermarket parts, stunt riding, road racing and all around goofy $hit
@LegendSuspensions @saddlemenusa @LawTigers
New episodes every Thursday at 6:00 AZ time.
Edit Jake Hinke
EVERYTHING YOU NEED⬇️
www.kruesiorig...
ATV handlebars www.kruesiorig...
BRAKE ROTORS www.kruesiorig...
FLOOR BOARDS www.kruesiorig...
Skynet wheels
www.kruesiorig...
CV carb mod
www.kruesiorig...

Опубликовано:

16 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 186

@jastaylor2730 11 месяцев назад

Have the fueling kit sitting right in front of me about to do my 2006 88 in.³ heritage i’ve watched quite a few of these videos and yours is by far the best you’re very thorough I always enjoy watching you guys.

@kruesioriginals 11 месяцев назад

Thank you 🙏 hope it helps

@murphy6767 Год назад

I really like watching these install videos you explain it on point and I just want to thank you. I’m learning to wrench on my own bike and your videos really helps. Thanks again.

@shenanigansofmannanan Год назад

That's the difference between experienced mechanics and competent riders who vlog..... vs moto-vloggers who "wrench" for content but have a 0% clue what they are doing...

@patrickhollis5332 Год назад

Yea I know rite I’ve done a lot of the work on them but this side I haven’t ventured off in yet but getting ready to and yea he does explain and show more details than most no doubt

@boxcarbro3043 Год назад

Gotta note fueling for their amazing directions. Pretty sweet.

@kruesioriginals Год назад

There definitely the best in the game when it comes to that

@sethg8501 Год назад

The smile on his face at the end shows it all. All that work is worth it.

@elliotstrong5953 Год назад

Thanks for the ‘gear drive on Twin Cams suck’ comment, got some conflicting advice on that but gonna go with your info and stick with chain drive. Planning on a Feuling cam upgrade for my ‘17 Dyna this winter.

@Bajadave760 Год назад

There’s an ASMR note to these types of videos. I love it, good shit brothers.

@bretlagasse3560 Год назад

Your videos like this are awesome. I learned a lot from this one alone. Respect to you for acknowledging that you learned something new, to your audience. Even with your experience, that's huge for guys like me, wanting to build my own. Keep up the great work.

@kruesioriginals Год назад

Hell yeah man glad I could help

@midwestprince153 7 месяцев назад

Factory parts cause the dealership to have future repairs on their bikes and they do the whole "void the warranty" scare to make sure their customers come back to them vs other shops such as yours 🤣 it's just business lol

@28Mystry Год назад

This is the most helpful video I've seen, love the no bullshit take on your process. Thanks for posting man, it's given me confidence on doing this exact install

@kruesioriginals Год назад

Hell yes, glad we could help

@cop70s Год назад

Your install videos are hands down the best on youtube

@jonz5978 Год назад

Another great video! Wish I would have had RU-vid when I was just starting out wrenching on bikes. Be appreciative kids that channels like this are out there.

@HoustonR6ryda Год назад

Your videos helped me get my 06RK cam chest reloaded with the Fueling 525 kit with ease...Thank you.

@dshall442 Год назад

Just did the cam chest on my 2012 103. Followed this install pretty close and had no lifter noise upon start up either. Used all the gaskets from Feuling's kit except for a small little f*cker that isn't mentioned in the instructions anywhere and looks like you didn't use either. My new cams are the 543's, feels great!

@kruesioriginals Год назад

Hell yes man glad it worked out for you

@vicmanjw Год назад

Super thorough explanation Ryan on the cam setup!! Sorting out TDC on rear and then front cylinder 🤙🏻🤙🏻🇺🇸

@Jonathan-L Год назад

25:25 ... that's gold. Thanks for sharing Ryan!

@gregsleith1001 Год назад

Man seeing you pumped on the test ride and after that’s what it’s about!

@guest4002 Год назад

Love the bubbles impersonations 🤣🤣

@dlobby12 Год назад

Brahhh! That top dead center trick with the dots is a freeken game changer.

@kruesioriginals 11 месяцев назад

amen

@1YouTube_you 6 месяцев назад

Ugh…… it’s not a trick. Lol

@trentrichard2871 Год назад

Another great informative look at workin on HD. Thanks

@kruesioriginals Год назад

Glad you enjoyed it

@robertbarnhardt8201 4 месяца назад

Just put some Andrews in my 103 bob last night rode it into work this morning she pulls hard af this fall going to do some head work and make it a 110

@theodavies8754 3 месяца назад

Got a '99 fxdl 88 with carb. It's old tech lively enough.

@inthegarage.withalvaro.1344 Год назад

I could be wrong but I am looking at the same instructions sheet from Feuling and to me it looks like for the front cylinder the timing mark for tdc is: cam shaft sprocket mark up and Crank sprocket mark up as well. Love your videos.

@johnfhancock9299 Год назад

Dude I really like your videos, I have a 2000 Dyna wide glide FXDWG of course it is a twin can, and I have brought a S&S cam plate with 510C cams and new oil pump and I plan to install all that by my self,

@michaellobdell7064 Год назад

Nice video fellas! I installed that same Fueling setup in my 01 King. The crank gear was tight on mine too. Mines carbureted but it t fuckin rips too! Love your content. I’m watched the other cam install video you mentioned before I did mine. I loved the biker vs motorcycle enthusiast bit you did. Had me ROTFLMAO!

@kruesioriginals Год назад

Thank you 🤘🏼🤘🏼

@alainsimoes8113 Год назад

Yeah I agree with what the others said absolutely awesome keep up the great work great content you explain and show how it’s done 💪 I may be late to the party glad I made it 😂🎉 burn a joint and watch the work lol straight magic 😂

@kruesioriginals Год назад

Thank you 🙏

@dyna_dzn Год назад

@kruesioriginals you have the only stuff that’s straight to the point and explains everything. I thank you brother cause of this video I might be able to do this, fingers crossed. Keep up the good shit and ride on🤙🏼🤙🏼

@kruesioriginals Год назад

Glad I could help my dude and thank you for watching. I appreciate it.

@ehd1990 Год назад

Wish you guys were in LA. I want this done to my 01 Road King. Nice video.

@gigachad14888 Год назад

I had a customers cam bearing fail not long ago. Failed so bad and he let it go so long how cams wore inch deep trenches through the case and we had to send them out to be welded and re-bored. It also allowed his lifters to drop so much that the retaining/locator pin hopped on top of the lifter and do a load of damage up there too

@jim1407 Год назад

Beautiful, that’s my style of wrenching!!

@Stynee4HD Год назад

Oh by the way you are bad ass. You had some additional things that wasn't covered in the fueling. Thanks man. I hope I was allowed to use the p-word

@greentravelingmachine Год назад

Literally answered my question in the first 3 minutes! Biggest cam to go on a stock 88ci 525 unless I wanna do springs too

@riverat7558 Год назад

Out of the woods cam in a mikuni carb I can't stop smiling every time I get on that thing!

@kruesioriginals Год назад

Woods makes good cams they make big power

@adambenton6309 Год назад

I had a ticket to fly to Spokane and buy that bike and of course the same day another FXDX came up for sale locally so I bought it. Moral of the story is is I I should have made the trip. I did just put that fueling kit in the 2000fxdx and it has the 95” so it runs pretty good

@Iowawalrus 11 месяцев назад

That's a nice Kitty😂

@getoffmygrass6974 Год назад

I have great luck with the fueling oe+ stuff and I think gear drive is kinda a waste on a street bike but to each’s own. Even with my built and balanced cranks I use chains.

@Brad__Gray 9 месяцев назад

Bubbles voice was 👌

@LOVE-JC777 Год назад

03 dyna 25 k tensioners looked new. Word is some chains ⛓ are sharp and eat through the plastics. Good video 👍🏼

@daleclarkjr Год назад

Another bad ass build 🤙🏽

@RobertJones-ix2hu Год назад

I’ve always heard HD stood for Hundred Dollars. After owning my 06 for 4 years I’ve realized it actually means Hundreds of Dollars & Half-ass Done. Cause a few hundred is the minimum you’ll spend to fix their half-ass shit… Anyways, awesome video! You guys are fukn awesome

@erikkarfors8865 Год назад

this is awesome im just buying my first dyna FXD '01 and this is one of the first upgrades im looking to do (after a stage 1 of course). definitely gonna be using your kit for it. thanks dude

@kruesioriginals 11 месяцев назад

Glad I could help

@kap419pres Год назад

Damn I need that in my 06 RK. Just got it last Aug and it needs a little more power.

@dereknapier1132 Год назад

I have an 06 RK. 95” with a Feuling 543. Can’t compare to 525, but it’s mid to top bike. A well balanced cam. 90/95 rwhp rwtrq

@john0270 Год назад

Man I wondered why on earth I'd need the inner bearing puller/installer tool if I'm just doing my own bike when I could just use my blind bearing puller and drive the new bearings in like I have done every other bearing... obviously being prudent getting it started square ect. I have worked on nothing but metric motorcycles as far as bike /trans ect. Before, and bought a 2000fxdwg last fall. Previous owner did a 95" high comp and a woods tw6h cam with porting and the SE "race" inake/44cv carb the first year of ownership Records indicate he had the dealer do the SE hydraulic tensioner/oil pump ect upgrade a few years ago.

@JorgeL1 Год назад

This dude is cool as a fan

@brody5563 Год назад

Tw8-6 in a 103 with some domed pistons. Downside to me is it doesnt pick up rpm quick. But once you find that spot. Its fun.

@soldier09r 11 месяцев назад

This was a great watch and I learned some shit too!

@brianmaul7369 10 месяцев назад

I love the video, one thing i would appreciate though, would you please exspain that your showing S&S pushrod adjustment, but the fueling pushrods actually have a diferen adjustment setting than the S&S pushrods

@stuart1270 10 месяцев назад

Each pushed manufacturer has their own adjustment specs although procedures are basically the same

@rasheedph4920 Год назад

Best install vids for harley's playboy!! And where do yall find deals on these Dynas lol? In Texas, they like 9K +. Its dumb

@davidmcmahon5991 5 месяцев назад

There used to be quality, but nows it's quantity sad but True Ryan🤔😎

@brianmestaz8855 Год назад

Guys a bad ass

@08GSXR600WHT 8 дней назад

How rare are EFI 04's? Can my stock carb with this cam ever compete?

@glennthompson4166 Год назад

When you put in the lifters , are you putting them in in with the holes facing in or out ? Or does it matter ? , great vid by the way .

@jeffhawkins711 Год назад

Is fueling and S&S kit that much better than the screamin Eagle cam chest , oil pump kit ?

@kruesioriginals Год назад

s&s is for sure

@jeffhawkins711 Год назад

@kruesioriginals damn , I bought the fueling one tryin to save a couple hundred. Oh well thanks bro.

@hutch36xx Год назад

Ryan , I have an 06 Ultra with the 88 in it , has 21k . Should I upgrade my tensioners to the hydraulic or did Harley by that time fix the premature wear issue and just replace the stock shoes with stock ones . Video is awesome as usual . I was worried that You Tube pissed you off there and you guys were gonna stop your channel here . Glad to see you still at it ..!!!

@kruesioriginals Год назад

The 06 Dyna had hydraulic tensioners. Everything else was still garbage. You should definitely change that out especially with that many miles. www.kruesioriginals.com/products/feuling-hp-conversion-cam-chest-kit-1999-2006-except-2006-dyna?_pos=3&_sid=a64f59416&_ss=r

@joshuaramos9676 3 месяца назад

I was installing a new Feuling camchest kit with all new o rings but when I went to torque the camplate I noticed one of the threads was stripped. So I had to remove the camplate along with the oil pump that was already attached to the camplate. I fixed the thread with a helicoil but I wanted to know, those new o rings for those two small holes and the one for the oil pump should still be good right? To go to the Harley dealer and get new o rings it’s about a 45 minute drive

@kruesioriginals 3 месяца назад

You’ll be good to go

@Stynee4HD Год назад

Going through the same process but d oing a complete top 2 bottom w/ 525 rpr @ 47k orig. mi. Run out is 2k. 03 fxst got it n 07 w 2900mi. Not a pussy I just don't abuse it. Had her up to 114 mph w/ 1 1/2 in of throttle left no high-speed wobble. Can't wait

@MrTheDays1 Год назад

Lmfao muffle it hahahaha

@Sanfterhund 9 месяцев назад

DeeecenT!

@billydamnit Год назад

Thank you. Subbed

@kruesioriginals Год назад

Thank you 🙏

@user-xn1bo9rx5m 9 месяцев назад

if Harley made an Airplane in 2002 would you fly in it ? ? 👀

@kruesioriginals 9 месяцев назад

Definitely not

@howtowrestleamaligator6682 9 месяцев назад

I am leaning towards that fueling kit, what did they say about the the idler sprocket far as you not liking the fitment?

@kruesioriginals 9 месяцев назад

They are meant to fit tight like that. They’re a bit of a precision press fit.

@murphy6767 Год назад

Kruesi did that work on the front TDC if marks were opposite. On sprockets.? I done mine and the marks wasn’t exactly opposite from each other. On front TDC. They were a little off. Thanks.

@nybluesking 10 месяцев назад

Nice work my friend!! I appreciate the awesome video and wish you were here in New Jersey to do my bike. Can you provide a list of all the parts i will need to do this upgrade to my 2003 Road king? Thank you again and have a great day

@kruesioriginals 10 месяцев назад

www.kruesioriginals.com/products/feuling-hp-cam-chest-kit-2007-2017-including-2006-dyna?_pos=2&_sid=626163813&_ss=r

@keithmoran2588 Год назад

Fueling instructions say when u put everything back together the rear cylinder is at top dead center then rotate 180 so u can get TDC on front cylinder. I used ss and the dot on the top gear is about half inch forward tthen the fueling instructions to get TDC on front cylinder. Regardless of what co u use the chain gear gets reused so shouldn't the dots end up in the same spot for TDC front cylinder. Trying to figure out if that's normal or is something wrong.

@daleclarkjr Год назад

Why do you use s&s pushrods over feulings pushrods? Kinda Curious as I am about to install a feuling cam chest kit and not sure on what pushrods to use. 🤙🏽

@kruesioriginals Год назад

I like them better easier to install better adjustment

@keltingr2612 6 месяцев назад

8:45, they WANT them to fail so you BUY a new bike!!

@PeterSmith-or3pq 7 месяцев назад

These guys are great. Always positive ,but never old material . Always good to refresh ur twin cam. You have a 88 tc to hsr42 mikuni x over from mm vid?

@riverat7558 Год назад

I gave my 03 FLH to Steve at citywide cycles San Diego couple years ago and said beef it up bro this thing is a dog. He sent the heads out to get ported polished

@riverat7558 Год назад

Added the woods cams mikuni carb and I got to tell you I can't stop smiling when I get on that thing now!

@rollinggordo9945 Год назад

Feuling 543s on my 96" Fat Boy did wonders

@brookebrawley2142 5 месяцев назад

What is the name/type of lube that was thick used on the cams?

@kruesioriginals 5 месяцев назад

Redline assembly lubricant

@Chris-gi9ch 5 месяцев назад

Are the valve springs the same on an 02 FXDX? Sounds like a set to consider.

@kruesioriginals 5 месяцев назад

Anything older than 05 you will need to put springs in it if you go bigger than a 525 lift

@Chris-gi9ch 5 месяцев назад

@@kruesioriginals OK, thanks.

@Chris-gi9ch 5 месяцев назад

@@kruesioriginals I saw a video regarding the Woods TW-6. Do you have any hands on knowledge on that one?

@robertking5701 10 месяцев назад

I just got ahold of a 2003 Road King with 46k miles. I want to do the exact same thing your doing in the video. If possible can you tell what im looking to pay for parts and labor. Cheers

@kruesioriginals 10 месяцев назад

A couple grand-ish to do it, right?

@robertking5701 10 месяцев назад

@kruesioriginals that's not bad at all. When can I drop it off. Just kidding. I'm in south Texas but wish I was closer. I love your style and experience of working smarter not harder. Thanks

@jaredkish992 Год назад

What lifters do you guys like to run with these badass cams. I just put some 505:515 in my sport 2000 1200s and I’m still just breaking in everything

@twinsmotogarage1866 Год назад

Missing my 04 FXDXI right about now

@vicmanjw Год назад

One question on pushrod adjustment.. Can this procedure be applied to M8’s as well?

@kruesioriginals Год назад

Yes, depending on brand of push rod, and all that, you need to measure the thread pitch and know how much the tappet compresses

@vicmanjw Год назад

@@kruesioriginals ok awesome, thanks Ryan… I’m buying the S&S ones and probably the Fueling race tappets. By the way after your “test ride” on his bike we could definitely tell how fired up you were😂🤙🏻! One of my favorite videos on your channel by the way, keep on killing it my man

@28Mystry Год назад

Hey Ryan, I followed the feuling install procedures as directed, got everything all put back together, but when I tried the light gauge test to build oil pressure, that light just wouldn’t go out and I cranked that thing at least 10-15 times short several second bursts. Oil pump was full of lube and I have at least 2.5 qts of oil in there. Any ideas?

@kruesioriginals Год назад

Did you fill the oil filter full of oil? Your sensor could be bad or you probably did something wrong I would pull the camchest apart again and double check your work.

@28Mystry Год назад

Yeah filter was full of oil, I took it apart twice now and everything’s flowing and turning right. I do have my instrument cluster/gauges disconnected l if that would have any effect?

@brookebrawley2142 5 месяцев назад

Most informative video I've seen yet. Hopefully I don't fuck it up in the process of doing this 😂 ThAnks a bunch for making this video brother 💪 Just out of curiosity, what's it cost to have you or a shop do the labor on a 2005 Electra glide classic?

@kruesioriginals 5 месяцев назад

You’d have to call the shop and get a quote.

@kyledaehler9925 Год назад

Everyone new to the channel is gonna see you test ride Rob racks bike and not realize he’s a homie of yours and gonna be like “is that how you ride all your customers bikes” 😂😂😂😂

@kruesioriginals Год назад

😂😂 big facts

@brianmestaz8855 10 месяцев назад

Yo brotha so on a twin cam.88 b motor using the 525 cams is it true have to shave the innerr wall for lobe clearance

@kruesioriginals 10 месяцев назад

Not even close, that’s a real small cam. You should always check for clearance every time you do a cam job but that’s not a big enough cam.

@brianmestaz8855 10 месяцев назад

@@kruesioriginals I appreciate u sir In the fueling manual it says 99 to o4 may need case clearance but we will see what's up

@donniebrookins6215 5 месяцев назад

Are the cams marked as to what they are?

@scatterbrain7358 Год назад

So the 525 is smaller than the 509?

@kruesioriginals Год назад

@adamhill2788 Год назад

This video is helping me get the ballz to do this job on my 09' fxd 🤘 so I have the vance n hines fp3 tuner already, if I pick out my parts then auto tune it .. it'll do a super good job on the tune???

@kruesioriginals Год назад

No, that tuner is no good. It’s only good for exhaust and intake type stuff. You need a real tuner for cams. Or at least see if it has a basement built into it for the exact cam you’re putting in.

@adamhill2788 Год назад

@@kruesioriginals ohhh word...yea u can select which cam, intake, exhaust, big bore kit..brand, size, exct of aftermarket parts

@adamhill2788 Год назад

It blu tooth's to my phone which has an app that's pretty in depth...just been seeing mixed reviews on the pre set tunes n thou the auto tune mite be better after I selected all my parts/mods on the app

@williebutler9576 Год назад

Mice attitude 👍

@briandrumheller9100 Год назад

Love the vids as always. I just bought some rear shock sliders. Question? I have an 05'. Would you have gone the the 543 or the 574, If you would have had the newer style heads? Thanks

@kruesioriginals Год назад

574 all day makes a lot more power better power band

@BrianMikasa Год назад

Man this video is so oddly satisfying to watch. Which bars and grips are those?

@kruesioriginals Год назад

speed www.kruesioriginals.com/products/speed-kings-handlebars?_pos=1&_sid=5c8d3b5ed&_ss=r bar and risers

@johnlacomb7656 Год назад

Do you need to add a tunner with the feuling 525 cam chest kit

@kruesioriginals Год назад

Definitely need to get it tuned or run a confident tuning system with a good map. Not an FP3.

@johnlacomb7656 Год назад

@@kruesioriginals what would you recommend it has a k&n style air cleaner and dual fish tail pipes

@johnlacomb7656 Год назад

What would you recommend

@mharv7936 10 месяцев назад

Aanyone know the type of aasswembly lube used for the cams it looked darker and thicker than the red lube he used on the oil pump.

@pakarakia291 Год назад

I'm needing to do this too my 2005 fxd. Is everything you installed here does it come in the fueling kit.... i.e guick install pushrods & cams or do they come separate

@briandrumheller9100 Год назад

Fueling sells as kits including cams, lifters, pushrods, everything you need.

@Mikefordham76 Год назад

Just doing the same thing but a bit confused on the pushrod adjustment! According to the feuling info for their 4000 lifter the 32tpi s&s pushrods should be 3 1/3 turns. Do you recommend 4 turns like both your video's? Not so many people to ask here in the UK

@kruesioriginals Год назад

Depends on how much movement the lifter has that lifter might be different. I do not use Feuling lifters. You need to pull the lifter apart and measure it .

@matthewjamesgosselin Год назад

this video is the shit. seriously thank you

@kruesioriginals Год назад

Thank you for watching 🤘🏼

@scottybob3697 Год назад

So will this all fit my 01 Heritage

@kruesioriginals Год назад

www.kruesioriginals.com/products/feuling-hp-conversion-cam-chest-kit-1999-2006-except-2006-dyna?_pos=3&_sid=6f11dd4fe&_ss=r

@jeanpaullavieille5806 Год назад

Ya she sounds funding sick did not no you watch trailer park boys bubbles lol

@maxwellturenne3246 5 месяцев назад

Anyone know what exhaust hes running?

@jordanbeasley Год назад

Hey dudes, any reason you went with the OE+ over the HP+ ? Shopping both right now curious which one you recommend. How do the fueling camchest stack up against the s&s 509 kits

@kruesioriginals Год назад

It was just budget and this motor is not going any bigger so it would be unnecessary

@geoffreyjones2000 Год назад

I was wondering about the cost of the upgrade, sir

@davidcarroll7193 Год назад

Is the thunder max tuner better than the v&h FP3? Or is that just what you like to use

@kruesioriginals Год назад

Not even in the same league, or even same game. That’s like comparing sitting on the couch to being an NFL player.

@davidcarroll7193 Год назад

Thanks, I did some research your absolutely right. I’ve used the FP3 and taken it as far as I can and I’ve herd that the wide band sensors were the best but I didn’t know it keeps learning as you ride and it’s not a Harley ecm , very very tempted to get the thunder max !!

@jameswalker7713 Год назад

Did you need to install o2 sensors?

@kruesioriginals Год назад

They come with the Thunder Max

@PeterSmith-or3pq 7 месяцев назад

What they call that color ❤

@michaelmitchell5909 Год назад

Damn that fueling plate is really nice. I just bought a used 2004 road king with a 95" upgrade and fueling 525 cams!!!. Man it pulls hard holy shit...I need that fueling cam plate thou, it has a screamin eagle plate with the older bearings. When I'm ready to buy it I'll buy from you man..will you always carry that for the 88" twin cam? Do the roller chains come with that kit?

@kruesioriginals Год назад

I run the 525 on my stunt bike. I love that cam and 88. It’s a fun power band like a small dirtbike.

@franksaxton3583 Год назад

Harley Davidson has been running the scam that they are "made in America" and that they are "premium motorcycles". Lies. Most of a Harley is not even asse3mbled in the USA much less made here. And as for "premium".... you nailed it. The MoCo bean counters will happily sacrifice quality with any part that saves them five cents per unit.

@dereknapier1132 Год назад

What’s your take on the 543 Reaper in a 95”? Running in my Road King

@kruesioriginals Год назад

That’s a good cam, but I would run a 574 all day makes more power all around

@dereknapier1132 Год назад

@@kruesioriginals I knew it could use more cam