Hey there RU-vid,
Sorry for the low quality video, my editing software is having some bugs currently and I can't combine the two videos so there is a part one and two. This is a basic walkthrough of an install for water methanol on the abarth. I highly recommend a welded bung for the nozzle port as that will be more reliable. The routing for this is very simple on AEM's kit. I currently run Snow Performance's boost juice which is about a 50 /50 mix. You can also use HEET as a mix as well. The easiest way is with Snow performance's 50/50 mix. You can mix your own with VP racing's M1 5 gallon. It's pretty straight forward, just follow the nozzle size for you car but it comes pre installed with a medium sized nozzle pre installed so you will want to change that out with the smaller of the three options included in the set. The wires connect + & - to the battery and then to the AEM unit / controller, from there you have a couple more wires in which they will be going to the pump and the low fluid sensor as well as an optional led light to show when the nozzle is spraying. Two wires for each, negative and positive. (the pump, the tank, led light, and to the battery).
Instagram: jts_motorsport_builds
Products:
Nozzle adapter
www.snowperfor...
AEM Kit Part Number: 30-3350
www.aemelectro...
www.snowperfor...
Can be bought on ebay for around $45
VP Racing M1
www.vpracingfu...
Tools needed
Wire cutters, wire connectors, mechanics tool set, patience, zip ties
17 окт 2024
