Fiat 500 Classic - Part 7 - Front spindles restoration

Подписаться 2,8 тыс.

Просмотров 17 тыс.

50% 1

Rebuilt the spindles for the little Fiat. They were modified to use larger bushings, so I took them to a machine shop to fit new steel bushings that can house the original brass ones. The parts were sandblasted and painted.
Music from Tunetank.com
RocknStock - Dynamic Power (Copyright Free Music)
Download free httpstunetank.comt1fv81885-dynamic-power

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@ceesvandervelde136 2 года назад

.. nice 🐶

@stevemicheli8800 Год назад

How did you get the kingpin out of this assembly?

@AircooledProject Год назад

There's a safety pin installed in the knuckle, you can see me hammer it in at the end. You need to remove that and then hammer the king pin out.

@stevemicheli8800 Год назад

@@AircooledProject I got that safety pin out but the kingpin must really be stuck. I may need a sledgehammer to dislodge it, lol. Could it be that hard to drive out, in your opinion?

@AircooledProject Год назад

I don't have much experience with this. I only rebuilt this set, and the pin was pretty easy to get out. I guess if the car sat for a long time and there's lots of rust, it could get stuck. Try heating the outside of the knuckle.

@stevemicheli8800 Год назад

@@AircooledProject will do. Thanks for your help and quick replies. Much appreciated.

@AircooledProject Год назад

No problem. Good luck with your project!