Fiat Punto Evo 2009 -2015 radio removal & refit guide + part numbers used 

Great guide. Especially taking the whole cage out. Need that so I can rearrange the cables and put em in nicely. Can you tell me how to put a cable from behind the radio all the way to the trunk? I'm installing a rear vriew camera so I need that cable to go all the way back.

When i pish them apart they release and come out, any advice??

Why do you add the power wire with the fuse spur?? Does the radio not have power unless you run that wire?

Thanks for the information could you help me what are the door size speakers for the front and the rear I want to change them for aftermarket ones.

Hello, so for power i need to connect only the red wire to the fusebox and the ground from original ground wire of the car right? What about the yellow wire and the blue one? This to shouldnt be connected to anything? Thank you

Is this worth doing to my 61 plate evo? Can’t help but think how good a nice, high quality screen would look in that gloss black unit. Don’t know if it’s worth the hassle and the sacrifice of the steering wheel controls however...

Hello can you do the top vents removal video no one in the world has done this at all please i cant find how tom remove i taken screw out will not come out wrecked it all please

Thanks for the tutorial, it is great! But I have a couple of questions I would like to ask: 1. Which AWG/gauge is the power cable and why is it necessary? It is not enough if I buy an ISO harness and plug it from the old connector into the new radio? 2. I know one of the fuses used in the fuse tap/adapter comes from the fuse box but where does the other one come from? I have already bought a new radio and it comes with a 15 amp fuse pluged in the back; can I use that one? If not, which amperage must the new fuse have? Sorry for my ignorance but I dont really get to understand that part of the video and it is the first time I change a radio. I hope you can answer my doubts, thank you.

Great guide thanks. I also need to change my climate control panel just beneath this due to some damage on the screen, is this easy to do?

Hi Tom, if I am just wanting to add an aux cable to the existing stereo, will I have to take the entire casing out as shown in the video, I can I simply pull out the head unit with the release pins and plug it in that way?

Good instructions, I have just purchased a punto with a Sony installed. I want to swap it out for the original radio . Will the existing cables be ok ? Will I have to remove the power cable?

Great Video and will be a great help thanks. One question, I have just ordered the facia with exact same part number and manufacturer but it isn’t in a high gloss finish. The video appears to show the facia in a high gloss finish to match exactly. Can you just confirm it did exactly match? Many thanks

Hey thx for the great video. I did everything like described and it works like a charm as long as the radio is switch on. If I switch the radio off, several lights start blinking and fuel control etc won't work anymore. What did I do wrong? Thx for help.

Whats the point in snipping the red wire ? Why not just put a bullet connector straight on to your switched live you've ran and plug it into the connector ?

Hi I have followed the steps but dont get any sound at all from the speakers please help

If I want to install an AUX cable to the original radio in the Punto, where should I plug it in ? Do I need to remove the steering controls in the back and plug it in there ?

Can you tell me why you piggy backed this to a 5 amp fuse? It should be 10 amp minimum and surely it should have been piggy backed to the cigarette lighter socket fuse and they are not 5 amp. My radio has a 15 amp fuse in the back so why only piggy back it to a 5 amp?

Hi PJ, I have all the parts to change my radio now just wondering apart from the steering wheel control of the radio can doing this create errors with other things like the speedo? And can the trip mileage still be reset on the right steering indicator button?

will 17a wire work, or does it have to be 15a?

Sir where prhase frame

Gerad but where u get the stuff from the car ?

How many watts as this radio? Thanks

I have a Fiat Punto EVO 2011 and looking for a radio replacement with android dab Bluetooth etc... And fast responsive touchscreen. I see a lot of adds offering radio for fiat Punto EVO 2012-2015 will this one also fit in my 2011 model. Also is there one u can recommend I have so much choice and I am no expert so any help would be appreciated allot! PS: I am looking to replace the factory speakers as well

Hi, When i plug in the new radio it won't turn on. no power at all. why is that? it's a JVC 1 din radio

why would you like to swap radio on punto evo you got usb in standard radio

I lost radio code can some help me to recover code plz

Any one know what the wire colors are for the 2 rear speakers in the door for the fiat punto evo 2012

Where did you purchase the steario adapter?

Hello there, thanks for the nice video! I've got a few questions: I followed your instructions and made it all the way to the point where you put the aftermarket radio (in my case a 1din Pioneer) back into the dashboard. But there's no power unfortunately. I've never had this before and I've installed quite a few radio's in the past. Your video shows that I need to pull an extra powercable from the fusebox. But why is that exactly? Does it have anything to do with the CANBUS system that's on this car? If so, instead of pulling an extra powercable, would it be possible for me to buy a CANBUS cable system which I can use to keep the steeringwheel controls alive and power the radio at the same time? I don't know if you have any experience with this. Thanks for the reply :)

Everything is great! My facia won’t just click in for some reason and it looks the same as everything else it’s the same as yours but still won’t click

I screwed up the screws under the stereo grill, how could I recover them?

Mine won't come out

price

How many watts as this radio? Thanks