File fitting rings to properly gap. Hope this helps

Подписаться 11 тыс.

Просмотров 6 тыс.

50% 1

Cuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/usr/cuervoatv Cuervo Racing Raptor 700 specialists
951-743-6328 sales@cuervo-racing.com
m. MrCuervoRacing...

Кино

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@ScrewbyD00 5 лет назад

This video probably just saved my 734cc build. Thank you @MrCuervoRacing

@clintonmattingly 5 лет назад

What type of oil do you like to use during the break in period?

@spencerwilliams6399 4 года назад

So what about the 105.5 big bore cylinder does the top ring gap have to be 18-20 thousandths as well? What do you recommend

@labryze2 4 месяца назад

I have a 10:1 cp with a stock bore. I went over on both top and bottom rings. It was supposed to be .020 top and .025 bottom. Im at .025 top and .026 bottom. Is this too large of a gap for the top ring?

@AllanSmith859 Год назад

What would you say the maximum ring gap can be on the top and second ring

@notwerudy869 3 года назад

If i order from you are they going to be filed already?

@sjlopez9065 5 лет назад

What's the blue tool called and where could I get one?

@MrCuervoRacing 5 лет назад

Piston ring squaring tool

@everythingloud4068 5 лет назад

I have a 2019 raptor 700r and once and a while when I put it in reverse it won't engage right away then starts to click and then finally grabs within 2 seconds is this normal this is my first raptor thanks

@MrCuervoRacing 5 лет назад

Slip the clutch a little as you are shifting into reverse, this will help rotate the cogs to drop in.

@everythingloud4068 5 лет назад

@@MrCuervoRacing ok thank you I do most of the time sometimes I forget and it does that. And right off idle sometimes it will cut out when I get on the gas do I need a pipe and power commander to fix that or would that AIS plate I bought make a difference on that?