Visit my Facebook page here: profile.php?... Send me a PM where you would like a Mopar Life sticker sent and I will mail one too you. 😎 Buy your exhaust tips from Raccoon Performance. Here is the link: raccoonperformance.com.co
Nice! I do enjoy Flowmaster but after having mid muffler delete on my last Scat I was happy so just went the same way with this one. Glad I was finally able to make the tips look better though!
I got a satin black set for my WBSP. Had to contact him on form on website but i ended up saving them on the Shop App so i would get notification when they were in stock. Very nice!
@moparlifescatpack 0 seconds ago Awesome! Let me know what you think when you get them on. Check out this video for how the polished ones look. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=Vxp9FruFvQSg1DUS
Also check out my video on the polished version where I go into a little more detail on some tips for removing the factory tips. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=TBekBkLmBAsI2im7
Love it bro! I don't think it is a placebo effect. I have a 2023 Challenger T/A 392 and I put Flowmaster Super 10s, deleted the resonators, and have 4" quad tips. It sounds absolutely amazing! I really enjoy your channel. Thanks for the content!
Got my set last night, slight hiccup with them. YES they do bolt right on if you have stock resonators still in place. I have c&l reso delete pipes that retain factory tips, HOWEVER, you must cut off and reuse factory clamps. Using these tips by raccoon work great as long as you reweld the exhaust clamp back onto the c&l pipes. Raccoon is now aware of the slight dilemma and will be noting the website regarding this.
I finally did my mid muffler delete, MFer active exhaust delete and added these tips on my Scat Pack today. Sounds and looks great!!! Also the owner of the muffler shop told me not to waste my money on those aftermarket exhausts. Thanks again!!!
Nice that’s exactly my set up except instead of the MFer I have mine wired open but same concept. No need for anything else…sounds perfectly dialed in just like it is!
You won’t be disappointed. Now that I’ve had them on there a week it definitely gave it a deeper tone and coupled with the mid muffler delete it sounds amazing and, of course, looks bad ass. I don’t know why anyone would pay 5x more for a full exhaust. Let me know what you think of it when you put yours on!
@@moparlifescatpack they arrived already and I just finished my first cold start with them on. They look killer and I think it's a bit louder too like you said!
@@miked1551 bad ass! This week driving it around I can absolutely tell a difference in the sound! It sounds way more dialed in, if that makes sense. Deep roar and hitting that gas is like 😎!
Like those tips!! Will be checking out the website till purchase. I suggest you consider changing out the chrome Dodge letters on your rear panel to black ones that Dodge puts on the Hemi Package. Did it on mine and it looks great. Also, makes the whole rear of car look great with the black exhaust tips.
I actually have their stainless tips now. Same design just shinier look. However, I have been thinking about getting rid of the Dodge letters and doing something different just haven’t decided what yet. Here’s how the stainless ones turned out…ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=dmPkI9zGJh5PCiZn
just ordered them ! man i always thought those stock tips were welded tight smh , if i woulda tried harder on my old car my set up woulda looked better with the borla resonators i swapped onto it after muffler delete , i ended up dumping it down since I saw the tips were tack welded , well we live and learn thanks to channels like Mopar Life
Definitely! They look welded but its actually just the band. Loosen the bolt, give them a decent whack w a mallet if it still feels tight then they pop right off. You will LOVE these tips too. Sound is 💯!
I just looked at my 2023 3.6 SXT and there is a sheetmetal thing covering where the clamp would be. Any idea? Do these come in chrome or polished stainless?
These do come in stainless but Im not sure they fit your vehicle. Im pretty sure your factory exhaust is slightly smaller diameter. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=_C--lNE8gNqhufVp
I’m not sure of the measurements at the clip on point but I bet you could reach out to raccoonperformance.com.co and they would be able to answer that for you. As far as I know the tips for the RT and higher trims are all the same but they would know more definitively than I would.
....Looks WAY BETTER 👍!!! I've been trying to figure out what tips to get for my '23 Widebody! And yes, definitely don't like the Trackhawk/staggered look either 😵💫! How does someone go about getting in touch with him (exhaust tips) and getting a sticker too, if they (me 😖) don't have Facebook (or really any social media, other than RU-vid)? 🙄.😒
Here is the website the link for the tips: raccoonperformance.com.co. For a sticker just send me an email with where you want me to send it to: 1of211dodgeviper@gmail.com
I’m not 100% but I assume the RT tips are mounted the same as on my RT Scat. Check my other install video for more info on how to remove them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=7nTHgc5jl5O548CH
I actually talked with them a week or so ago and was told they have a supply incoming so hopefully soon! 🤞🏻 They are definitely worth the wait though I promise!
@@djv154 yes. Removal is the same as in my video. They may be hard to get off after loosening the bolt but the weld is only of the band. The lip of the exhaust tip may be tightly “stuck” but it just needs a little whack w a mallet or hammer to knock it loose. You may think there is no way this is coming off then you knock it loose and it is free. I’ve had several comments of people saying theirs is welded. I guarantee you (if its the factory set up) that its not welded. Only part of the band clamp is welded to hold it in place but the tips are just in there tight.
Only other ones I know of are the ones off the Jeep Trackhawk but they are staggered and that looks isnt for everyone. Im definitely not a staggered fan.
I just got mine in today but when I tried to pull the stock tip off it almost seems welded I’m having a hell of a time trying to get it off any ideas? Mines a 2020 scat
Yes…it looks welded on one side but its just the clamp that’s welded, not the tips. After you’ve loosened the bolt just take a rubber mallet and give the tips a good whack from towards the back of the car and it will loosen it. Watch my other video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=hkbA8AMl1r-kujBh and skip to 2:30 mark and I explain it. Hope this helps.
@@moparlifescatpack I’m wondering if after 4 years mine are possible just stuck with some rust maybe I’ll hit it with some penetrating oil tomorrow and a mallet
Yes, just whack it with a mallet and it will come loose. It feels so tight like this welded but it’s really just tight in that one spot where that clamp is welded. Give it a couple of good whacks and it literally falls right off.
@@moparlifescatpack definitely will try a mallet and some penetrating lube to see if it will get free if not I’ll just see if the muffler shop can do it when I go get a mid delete
Read through a bunch of these comments, and you will see a lot of people have had that problem and some of them have even sworn that there’s is the only one that is welded on. And then a good whack later and it falls right off and they say oh yeah, you were right. Lol I thought the exact same thing until I knocked it with a mallet and it came off so loosely. I felt silly afterward, so you definitely aren’t the only one.
I have all of them. Check out the latest video to see how they all look on the car to help you decide which you like best! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KU18qSh63UU.htmlsi=z2jSTIlDw4HJRUTj
Im pretty sure the exhaust tip set up is the same but you may want to reach out to the sellers first to confirm that before you purchase them. Here is the link to their site: raccoonperformance.com.co
Pretty sure they won’t work on GT or SXT. My neighbor had a Challenger GT rental and I noticed it didn’t have the same tips as my scat. It had chrome bezels that were attached to the bottom part of the bumper.
@@robertrabe5885 I just checked their website and the SXT isn’t listed. Only shows these as fitment: 2015-2023 Dodge Challenger R/T 2015-2023 Dodge Challenger R/T Scat Pack 2015-2023 Dodge Challenger Scat Pack 2015-2023 Dodge Challenger Hellcat
@@moparlifescatpack thank you! any tips for getting the stock exhaust tips off? I loosened the bolt but can't for the life of me get the exhaust tips off. I have a 2021 challenger scat. From the factory they seem to have spot welded the clamp to the exhaust but even loosening the clamps and a couple hits of a hammer it aint budging.
@@wallabysydney7672 If they are on there tight whack the back side of them with a hammer towards to rear of the car. They 💯 % WILL come off they are just on there really snug especially around where the band is welded. Don’t be afraid to hit it with a hammer to help knock it loose. Check some of the other comments on here as another guy had the same issue and was able to knock his loose. Its just tight.
Its not welded on. The weld you see is just to hold the band clamp in place. If you have trouble getting your stock tips off just give it a little whack with a hammer to help it come loose and of course make sure the bolt is loosened enough. I thought the same thing too when I first went to install them but they do come off…you just may need to add a little persuasion.
@@jaylambert5915 I’m 100% positive they are not welded on. There is a weld that makes it look like they are but the lip of the tip sits between the outer band that is welded and the pipe exiting the resonator. If you whack the back of it as if to knock it toward the rear of the car it WILL come off. Its just on there a bit tight but it is definitely not welded even though it would appear that way. This is all assuming you have factory tips and no one has done anything before you. I thought the exact same thing as you but gave it lick with the hammer and took it right off super easy.
Lol I want to believe! I’ll try again tomorrow and see. I did give it a couple of wacks but not from the rear outward like you described. It is a stock exhaust with nothing done to it and it has the bolt so it wouldn’t make sense for it to be welded too. I just thought maybe some overzealous welder got a hold of it at the factory. I’ll update tomorrow!
That is awesome. Sounds like you got lucky then. Post some pictures of it on our Facebook group so we can check them out. I would love to see what they look like. facebook.com/share/9vCupAaqKJaWsSnP/?mibextid=lOuIew
Here’s the link to the tips: raccoonperformance.com.co And here is a link to what some of the options look like on the car: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KU18qSh63UU.htmlsi=Rd1D_wav5ba1Lk27
Since I’ve posted this video they have added a website. There is a link in the description as well as here: raccoonperformance.com.co BTW these things are sick! Look aggressive and sound aggressive!
Awesome! Be sure to let us know how you like them. Feel free to post pictures of yours on my Facebook group! Love to see them! m.facebook.com/groups/1436035977215715/?ref=share&mibextid=S66gvF
@@ViTrucker340 That’s awesome. If you have Facebook post some pictures of them on the channel FB group. I’d love to see what you went with! m.facebook.com/groups/1436035977215715/?ref=share&mibextid=S66gvF
And they now offer polished! I’m going to be putting a set of polished ones on this week. I’ll put a video out to show what they look like but I’m excited. I was looking for polished to begin with so can’t wait!
Thanks! Check out my other video with the same tips but in polished! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tv3Ne7DPK7E.htmlsi=kVokPkY7srsz9wxf
What a backwards world. The originals fit nicely in the lower valance. The new ones look like someone tried to put a round object in a square hole. I'll buy your original tips.
Yeah man. Ones you need to weld on cost that much. And are smaller! These are big fat fatties and bolt on! I got them when they were $250 and I love them!
Send them an email and you can probably reserve a set when they get the next supply! They definitely always sell out fast but that’s because they are a great product!
Agree. The quad round tips look out of place on that stock diffuser that was designed to use the "large mouth bass" stock tips. Maybe some kind of square quad tips would look better. I don't know, but those round tips look like a goofy afterthought.