No video :(

FINALLY: How To Import RV Trip Wizard Trips Into A Garmin GPS! Step-By-Step

Подписаться 2,2 тыс.

Просмотров 10 тыс.

50% 1

Importing a trip from RV Trip Wizard to a Garmin 890 GPS is very easy if you follow these steps.
🎥 IN THIS EPISODE
We've been getting a lot of questions about how to import a trip from RV Trip Wizard to a Garmin GPS. In this short video we go through each step you must follow and show you as we import a sample trip into our Garmin RV 890 GPS.
Trip Wizard Website
tripwizard.rvl...
Garmin BaseCamp Website
www.garmin.com...
🔔🔔🔔 SUBSCRIBE NOW: www.youtube.co...
🔴 Follow us on Social Media 🔴
📖 Facebook: / riverstoridgesrv
📸 Instagram: / riverstoridgesrv
🔴 Affiliates 🔴
✅TSD Open Roads: fuel discount program
apply.myopenro...
✅MyRVmail: Mail service for travelers
gomyrv.com/4674
✅Passport America: A great way to save 50% on site fees
passportameric...?rfsn=3867871
✅ Harvest Host: Free overnight camping
www.harvest-ho...
This is a Referral Partner Link and we are compensated when you purchase a membership from Harvest Hosts. At no additional cost to you.
🔴 Some of the links on this page are affiliate links. We will earn a small commission if you chose to make a purchase using our links. This commission comes at no additional cost to you but helps us keep providing the content we love to share. As a promise to you, we will only recommend products that we use and we believe can be a benefit to you.
#riverstoridgesrv #fulltimervliving #rvliving

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@RiversToRidgesRV 3 месяца назад

Multiple people have commented that the trip legs are displayed out of order after they import trips from RV Trip Wizard to their Garmin. I sent an email to Garmin to see if they had any answers. I'm also doing some testing on my own and will update my comment if I find a solution. If anyone finds a solution, please post it here to help others. Updates: 1. One issue I've noticed is after importing a trip into my Garmin, the Garmin will display an "uploading" image. I've always turned the Garmin off/on to clear the image. Garmin Support said the image will remain displayed until the GPS is disconnected from the the computer. 2. When importing a trip from Basecamp to the Garmin, the legs get displayed out of order. This is because each leg of a trip is imported as a separate trip, not a leg of a trip. There is an option in Basecamp to combine the legs into one trip, but I haven't been able to import the updated trip successfully. Dan

@chaosncheckt9356 2 месяца назад

Another minor issue is the stops in RVTW are numbered and that is part of the name when importing into Garmin. The solution I found (and this mainly pertains to stops 1-9) is I went in and renamed all single digit stops by adding a 0, so 1 became 01 and so forth. Again, only a problem for me from 1-9 and right now I'm working on a four month trip with 90 stops. FYI, Garmin no longer supports BaseCamp.

@jackmason7518 6 дней назад

Good Morning, Thank you for taking your time for this. Jack

@RiversToRidgesRV 6 дней назад

@jackmason7518 thank you so much for watching and leaving a comment, it means a lot to us. Hopefully you got something out of the video and it was helpful to you. Dan

@captnawty7966 5 месяцев назад

An excellent video that answers a lot of questions. A short video with all the right answers is better than a long video that leaves you with to many unanswered questions.

@RiversToRidgesRV 5 месяцев назад

@captnawty7966 thank you for watching and leaving a comment to let us know you liked the video. Honestly I did this video because someone asked about the process, but it seems to have helped a lot of people. Dan

@richdv6800 3 месяца назад

Great video, just what I was looking for, thanks!

@RiversToRidgesRV 3 месяца назад

@richdv6800 Hey Rich - Thanks so much for the compliment and for writing in. We really appreciate it when our viewers take the time to write in to let us know they appreciate our content - it means a lot.😊 Have a great week! Deena & Dan

@mooreroadstotravelon3 7 месяцев назад

WOW Dan, this video was GREAT! For 4 years of using the RV trip wizard and my rv Gramin 890 and I could never transfer my files. Had no idea I needed "Base Camp". Thanks for the video. Safe Travels from Moore Roads To Travel On ,

@RiversToRidgesRV 7 месяцев назад

That is awesome! So glad we could help. That is one of the reasons we started our channel. When we first started researching RVing, we watched a lot of RU-vid videos and learned quite a lot. We figured we could do the same and help others. Thank you for watching, and most of all thank you for the comment, it really means a lot to us. be safe Dan & Deena

@timpittman7226 Год назад

Dan, I have been transferring routes from RVTW to my Garmin via Base Camp for several years. What I've learned is the route your Garmin GPS follows may not be the route you created in RVTW, though the stops will be the same. The reason for this is that when you transfer the route from RVTW to your GPS, your GPS creates its own route to the destination or stop complying with the parameters you have set in the GPS, say for example "avoid highways". Thus the routing displayed on the GPS will be different than the RVTW routing. But even if the parameters on the GPS and RVTW are the same they might not display the same because Garmin uses their own routing algorithm that Garmin created and licensed, and it will be different than the routing algorithm RVTW uses. However many times the routes will be the same, you must verify the routing to be sure. In practice I've stopped downloading routes from RVTW. I use RVTW to find the campgrounds and allow the GPS to guide me there.

@RiversToRidgesRV Год назад

Hey Tim, thanks so much for the information. I found out the same as you. I noticed the Garmin route was sometimes different from the RVTW route. I figured it was due to different parameters like "avoid toll roads", or "fastest route". I used to download a whole trip with multiple stops into my Garmin at one time, I started getting away from that and just enter one leg at a time. Now, I'm slowly getting away from that and just entering my destination into the Garmin and verifying the route. Dan

@debandpete Год назад

@@RiversToRidgesRV I was going to ask if the Garmin changes the routes based on the data you programed into it about your specific rig or if you were just following trip wizard's route which would basically defeat the purpose of the Garmin RV GPS. It looks like you both agree that you get the Garmin routing but the trip wizard stops. Is that correct?

@RiversToRidgesRV Год назад

@debandpete yes, you are correct. My Garmin will re-route my RVTW route based on the Garmin algorithms. I always compare the RVTW route to the Garmin route just to make sure they are at least similar, haven't had an issue yet. Lately I've just been entering my travel day stop into the Garmin the morning we leave just to see how that works. So, I'm basically using RVTW for planning purposes and the Garmin for the actual route. hope this helps Dan

@debandpete Год назад

@@RiversToRidgesRV Perfect, thanks!

@kaysharon1238 11 месяцев назад

Thanks for the info. But if you prefer to use the Garmin route, why not just accept the changes that it makes to the trip when imported? I have read that Garmin GPS routes better than TripWizard GPS. The warning that you gave about being routed past a stop, uturn and then back happens when I route directly on the Garmin, so it is not due to importing a trip.

@catchingupwiththecodys2861 5 месяцев назад

Great tutorial Dan! Well done!

@RiversToRidgesRV 5 месяцев назад

@catchingupwiththecodys2861 Great to hear from you and thank you so much for watching. This is one of those videos that we did because someone had a question about it. I honestly didn't think many people would watch, but we are getting a lot of comments about how the video has helped fellow RV'ers. That's always great to hear. Travel Safe Dan

@RamblinRoadies Год назад

Thanks Dan. I have all the tools, so now I will try this out.

@RiversToRidgesRV Год назад

Hey Frank, hope this was helpful. Let me know if you have any questions.

@turnbullstravels735 3 месяца назад

Thank you!

@RiversToRidgesRV 3 месяца назад

@turnbulltravels735 Absolutely! - glad we could help!👍 Dan & Deena

@turnbullstravels735 3 месяца назад

@@RiversToRidgesRV Dan - we just received our Garmin 895 and have been able to import a trip - but what's driving us nuts is that our stops are completely out of order - like in your end frame, with 4 stops, yours were out of order as well. Any suggestions for how to keep the order intact as we move from Trip Wizard to Garmin? We are full timers and although I "chunk" the year into shorter trips of say 3 months, I'd still rather they show up in order. Thank you!

@RiversToRidgesRV 3 месяца назад

@turnbullstravels735 sorry, but I haven't looked into how to keep the stops in order. At first I thought they might be in alphabetical order, but that's not the case. Also, I can't tell if this is a TW issue or a Garmin issue. If I can get some spare time to look at this, I will, but no promises, my 'real' job is keeping me very busy right now. Hope you understand. Dan

@medicineshoppe169 Год назад

I followed all of your info but still had challenges loading the gpx file. I called Garmin and they said to transfer the stops from the trip one at a time. Ultimately that worked. Thanks for the help. I have bookmarked your video for the next time I need to download a gpx file.

@RiversToRidgesRV Год назад

Sorry you had issues, but it sounds like Garmin was able to get you set up. Hopefully it will be easier next time you try. I've entered multiple stops many times without any issues, maybe I just got lucky. Dan

@randallcumbaa1647 7 месяцев назад

Dan...such an informative, detailed and simple to understand video. I just purchased the 795 and although it says to use a memory card to import a route, it just does not work. So, the information about Basecamp was very helpful, but for some reason when I import from RV Wizard to Basecamp, then export to the 795, my stops are out of order. I want to go from point A to point B, neither of which is my current location. I want to go from A to B, but include several stops/waypoints inbetween such as Loves (with propane refills), Walmarts, and laundromats. In RVTW, I organized these in route order so I am not hiphopping back and forth across towns.

@RiversToRidgesRV 7 месяцев назад

@randallcumbaa1647 Thanks for watching and glad the video was helpful. Without actually seeing your issue I probably won't be able to help, sorry. I've never had an issue with stops getting out of order. Are they just listed out of order, or does the route actually want to take you out of order? If they are just displayed out of order, you could do a quick check and create a trip with a few stops in you current location around town. Maybe just a 5 -10 mile trip to see if the route actually works. hope this helps Dan

@randallcumbaa1647 7 месяцев назад

@@RiversToRidgesRV Thanks so much Dan. They are listed out of order. I've numbered them in hopes that might help, but to no avail. I will give your suggestion a try. You are so kind to be this helpful to so many.

@randallcumbaa1647 7 месяцев назад

They seem to import into Base Camp in travel sequence order (as I have in RVTW), but they appear out of order on the Garmin on the side panel and the map.

@RiversToRidgesRV 7 месяцев назад

Thank you Randall for the kind words. We learned so much from watching RU-vid videos, so we don't mind trying to help out whenever we can. Good Luck Dan

@peterleabo 7 месяцев назад

Well done, clear and concise! This may be a question for Garmin, but I thought I'd ask you first. I have a Garmin RV780. I created a trip in TW, exported the .GPX, imported the .GPX into BaseCamp, and sent that route to my device (Garmin RV780). I watched the download progress in BaseCamp and saw the green checkmark on the RV780 folder. I disconnected the RV780, and started it, and no Saved Trips appear in Trip Planner. Am I missing something or do I need to call Garmin? (I've imported .KML from Google MyMaps to BaseCamp, and have sent those to my Garmin Zumo XT, so I know the connection between BaseCamp and the GPS units is working).

@RiversToRidgesRV 7 месяцев назад

@peterleabo sorry I can't help you. I have the Garmin 890, and honestly don't know anything about the 780. Maybe you will get lucky and someone will respond to your question. Worst case you may have to call Garmin. If you do figure it out, please let us know in case others have the same issue. Good Luck Dan

@MonacoMike 2 месяца назад

I have the 1090 so I found this video quite interesting. Typically I do all of my planning in TW and before each travel day I will input the address of my next destination and then follow my Garmin GPS. I have found on occasion slight differences in routing between TW and Garmin so to be safe I follow where Garmin route me. My question is "when you input your TW planned trip route which device takes presidence over the safest routing. Does Garmin correct the TW route to safely get you to your destination or just route you where TW thinks you should go? I tend to believe Garmin has much more experience in routing but them maybe they both get their data from the same source, I don't know.

@RiversToRidgesRV 2 месяца назад

@MonacoMike Honestly I don't import my TW routes into the Garmin much anymore. I use TW for all my planning and general routing. However, on travel day I use my Garmin and compare the Garmin route with the TW route just to make sure there are no major differences. Usually the routes are similar and if not, I'll do a closer comparison before traveling. My Garmin is aware of the height and length of my RV, so it should give me a safe route. Depending on your settings, Garmin and TW can use different algorithms to determine routes, that is why there may be differences at times. Hope this helps Dan

@MonacoMike 2 месяца назад

@@RiversToRidgesRV I do the same thing as I trust Garmin more than RVTW to safely route us to our destination. That said I have gotten some suspicious directions from Garmin but they weren't bad or got me into trouble, just maybe a few extra miles of driving.

@RiversToRidgesRV 2 месяца назад

@MonacoMike I always try to check my routes the night before, just to make sure everything looks ok, and it gives me a chance to look at satellite views of turns and other things I want to double check. It also gives me a change to look at the entrance to the RV park and places near by so I know when I'm getting close.

@MrRimshotgraphix Год назад

Thank you, sir!!!

@RiversToRidgesRV Год назад

You bet! Hope it helped Dan

@Bob33O 10 месяцев назад

Quick question for you. My understanding is that you need to purchase RV Life Pro and the Wizard is part of the tools included. Is that correct?

@RiversToRidgesRV 10 месяцев назад

Yes, it's a yearly subscription. We're full time and use it all the time. To us it's priceless.

@patcarden3028 Год назад

Thank you, I will try this. take care

@RiversToRidgesRV Год назад

Hey Pat, hope it helps, please let us know if it works for you Dan

@patcarden3028 Год назад

@@RiversToRidgesRV I will, we are planning an trip to Maine for next year, so it will take some time, thanks again.

@RiversToRidgesRV Год назад

Hey Pat, we just left Maine a week ago, had a great time in Bar Harbor and Acadia NP. Hope you get a chance to visit these areas. We did a 2 1/2 hour boat tour of the island and really enjoyed it, even saw some seals. If you have any question, please let us know. P.S. you have to have a lobster roll, their awesome Dan

@patcarden3028 Год назад

@@RiversToRidgesRV well, I do have a question, how far out did you make reservations at campgrounds? We have been to Maine a few times, but never camping in our RV. I have made some calls to a few campgrounds that we would like to stay at, but some have not emailed back, and one said after the 1st of the year. Thanks for your help. ps: we always hit the lobster rolls hard, lol.

@RiversToRidgesRV Год назад

@patcarden3028 We normally book 4 - 6 months out depending on where we're going. If we're going to a popular spot like Yellowstone or The Tetons, we will book a year in advance. We stayed at Timberland Acres RV Park in Trenton, ME when we visited Bar Harbor. We booked it about 6 months in advance. The Camp Ground is 'OK', there are a couple others in the area that looked pretty nice ( and expensive ). The Bar Harbor / Oceanside KOA Holiday looked very nice from the road, but we didn't drive through the park. The Wild Acadia Camping Resort looked very nice also, but we did not drive through. We were there over Memorial Day weekend and our campground was about 3/4 full, which surprised me. One of our favorite spots for lobster rolls is The Travelin Lobster on Mt Desert Island just south of the KOA on RT 102 Now you have me wanting more lobster (lobstah) rolls Dan

@9toFree Год назад

Thank you for the detailed video. Very helpful as this is my first time exporting from TW to Garmin. Historically, I have trusted Garmins routes but have questioned their suggestions recently. For instance, going from Sundance to Cody WY, Garmin wants me to go all the way up to Billings then west/SW around to Cody. Two hundred miles longer than TW suggested route which is 90 West to 16 over the Big Horn Mtns. I called Garmin to get their take. They sat alongside me and Input all my Trailer/Vehicle information which lead them around the mountains but still not quite the same route mine suggested. They have a ticket going to get this reviewed. Outside of getting the Garmin to read a more preferred route of travel that it may not be otherwise offering, what are some other reasons to export from TW? I suspect no other reason but thought I’d check to see if I am missing something.

@RiversToRidgesRV Год назад

Hey 9 to Free - First of all, thanks for the info. It may help out another RVer. When we plan our routes we sometimes plan months ahead and with multiple stops. So, it's easier for us just to enter the route with all the stops at one time so we don't have to enter each leg of the trip each time we move. Thanks for writing in. Have a great weekend!

@sandyperley3786 11 месяцев назад

The newer RV Gramin's like my Garmin 895 allow you to transfer the trip via bluetooth using the Garmin Drive app.

@RiversToRidgesRV 11 месяцев назад

NICE! that would be so much nicer and quicker. Thanks for letting everyone know about it. Dan

@markjb1956 10 месяцев назад

How do you do this?

@RiversToRidgesRV 10 месяцев назад

We don't have an 895, sorry, I can't answer that question

@markjb1956 10 месяцев назад

How did you do use Bluetooth to transfer to Garmin 895

@RiversToRidgesRV 9 месяцев назад

Sorry, our GPS doesn't have Bluetooth so I can't answer this question

@mooreroadstotravelon3 6 месяцев назад

Hi can you help me? I need to add a stop to an already saved trip on my Garmin RV 890 from trip wizard and I haven't figured out how to. Thanks

@RiversToRidgesRV 6 месяцев назад

Hey @mooreroadstotravelon3 thanks for watching and thanks for the comment. This probably isn't the answer you were hoping for, but the only thing I can think of is to add the stop in Trip Wizard and re-import the updated trip to your Garmin. I'm sure there is a way to add a stop to a trip in Garmin but I have never tried. Sorry I couldn't help more Dan

@christopherwhyte2360 Год назад

Nice video. I’m not sure I really appreciate the advantage of doing this vs. entering in each destination in the GPS for each leg without importing.

@RiversToRidgesRV Год назад

Hey Christopher, good question, our trips usually consist of 20 - 30 different stops, so this makes it easier just to enter all the stops into the gps at one time, other than that, there probably isn't much of an advantage.

@christopherwhyte2360 Год назад

@@RiversToRidgesRV I assume it used the routing from Trip Wizard rather than what the Garmin might route. Will the Garmin still potentially re-route for traffic or other issues, or will it stick to the trip wizard route?

@RiversToRidgesRV Год назад

Hey Christopher, great question. From what I've seen and from what others have commented, it appears Garmin can re-route your trip. It appears to be based on your Garmin settings.

@jefferysharp7676 11 месяцев назад

I was wondering if you can help with a problem I'm having with importing to my Garmin RV 895, I plan a route and make route changes which show as waypoints but when I import to the Garmin the route changes or waypoints won't show on the Garmin and it has me stumped

@RiversToRidgesRV 11 месяцев назад

@jefferysharp7676 I have the Garmin 890 and I'm not familiar with the 895, but I can try to help. Does the 895 have an icon for "Trip Planner" and "Saved Trips"? This is where the trips are saved in the 890.

@jimdinwiddie4837 Год назад

Great video, I've been searching for one to explain what I knew had to be a way to transfer the file to my GPS. I was able to transfer the file but it doesn't come up in Trip Planner but when I look at Saved all the stops are there. So I'll make sure I have a couple of back ups for the trip. I don't understand it and It may work. I have a 770RV.

@RiversToRidgesRV Год назад

@jimdinwiddie4837 glad the video helped you out. We have the RV 890 so the stops may show up in a different place on your 770RV. But, it sounds like you were able to transfer your stops, that's great. Dan

@randallcumbaa1647 7 месяцев назад

This worked for me as well, however, the stops/waypoints were out of sequence.

@RiversToRidgesRV 7 месяцев назад

Did you ever figure out your issue?

@jimdinwiddie4837 7 месяцев назад

@RiversToRidgesRV Yes, I got it to work, but instead of one continuous plan, it chops it up to each stop. It's workable but not user-friendly.

@RiversToRidgesRV 7 месяцев назад

Glad you got it to work, do you think it's a Garmin issue or RTW issue?

@SoonerDiscGuy Год назад

Thanks for the info. Do you ever go into Basecamp and correct the route before transferring to the Garmin?

@RiversToRidgesRV Год назад

Hey Lawrence, no I have not, but I always verify the route is correct before transferring to the Garmin. With that said, I still notice sometimes the route changes once it is loaded into the Garmin, not sure if it's due to settings being different from BaseCamp and the Garmin. But, I'm slowly getting away from importing routes to the Garmin via BaseCamp, recently I've been entering my destination into the Garmin by hand, then verify the routes match with my TripWizard routes. It seems like something in the importing process will confuse the Garmin and add some extra unwanted turns to the route on occasion, so I always double check before just blindly following what the Garmin says to do.

@SoonerDiscGuy Год назад

@@RiversToRidgesRV Thank You Sir. Wasn't sure if it was me or the Garmin/RVTW program. I have been doing the same, plotting in Garmin as follows on RVTW. Thanks for all the insights. Have a super day, Larry

@RiversToRidgesRV Год назад

Lawrence, I think part of the problem could be different versions of maps. For example RVTW may know of a new road that the Garmin isn't aware of yet. But that shouldn't be a big issue until you get off the major highways. Another possibility could be RVTW may have different route settings that cause issues. For example, RVTW may be setup to avoid toll roads and Garmin may not.

@frebersfix-it7202 Год назад

thanks for the information! I performed the export/import but found that I needed to right click on each segment ( I had 21 segments) and select recalculate. Most if not all of the segments showed "as the crow fly's" routing until recalculated. There were some issues with the translation to Garmin where it had me going in a HUGE loop instead of going straight through. For instance, I wanted to go "through" Valentine, AZ from East to West. Garmin took me to the edge of Valentine on the East side, then back tracked to take a more southerly route to get to the West side of Valentine, AZ and then continue the trip west. I took a couple of hours to straighten that out... You are absolutely right, check the route before you go! Garmin has a "follow the route" tool in the menu bar, that if set to X1000, you can check your segments for issues before downloading to the GPS. I was disappointed that none of my dates for stays from RV Trip Wizard came through, so the dates and time in the Garmin were all todays date and time. Thanks again for putting the RU-vid together!

@RiversToRidgesRV Год назад

To be honest, I haven't been too happy with importing our routes. I started to only import one segment at a time and the route would still get messed up occasionally. I always double check my routes after importing.

@jmasury6265 2 месяца назад

How do I remove the imported routes from the Garmin RV895?

@RiversToRidgesRV 2 месяца назад

@jmasury6265 We have the RV890 so the steps may be slightly different. If we want to delete a route or leg, we just go into Trip Planner, then Saved Trips and select the route/leg we want to delete. Once a route/leg is selected, click the wrench icon (the 895 may have a different icon) then scroll down until you see Delete. Hope this helps Dan

@kpower4362 Год назад

Thanks for this video. I have been manually creating routes into the RV890 from my TW route. Importing to the Garmin should be much easier. One question - When importing even a small route file into the 890 it takes FOREVER, and sometimes I just cancel the import. Any thoughts about what may cause this? Using a Windows desktop. Thanks.

@RiversToRidgesRV Год назад

Hey K., I think the same thing that happens to me sometimes is happening to you. Once in a while I'll import my routes into the Garmin, as the routes are downloading to the Garmin an icon is displayed showing the download is occurring. I've had times where the icon will still show the download occurring even after 30 minutes. When that happens, I just turn the Garmin off and back on again and that has always worked for me. Hope this helps. Dan

@kpower4362 Год назад

@@RiversToRidgesRV Thanks Dan, I will give this a try!

@RiversToRidgesRV Год назад

@@kpower4362 You're very welcome. Hope it works for you.

@PhillipCBarnett 9 месяцев назад

When you import TW is it primary or Garmin? I have experienced TW giving extra turns you mentioned. Why have Garmin when you can use TW on your phone. Thanks.

@RiversToRidgesRV 9 месяцев назад

Hey Phillip, we use TW mainly for planning our trips, we have 30 stops on our current trip and TW makes it very easy to plan and find campgrounds. TW will also let us know if there are any road conditions to be aware of, like low bridges. However, we usually just enter our next destination into our Garmin and follow the route Garmin gives us. We always plan ahead, so if Garmin tells us to go a different way than TW, I can always check before we start our travel day. Personally, I don't like trying to look at my phone while driving, too small for me. I like having the Garmin on my dash so it's easy to take a quick glance at it. safe travels Dan

@wingz94 Год назад

Can you remove old trips afterwards? Say you take a one time trip across country with your RV, Can I go back and delete that one

@RiversToRidgesRV Год назад

Hey Bob, yes you can. I usually only enter one leg at a time into my Garmin, then delete the leg once I'm ready for my next leg of my trip

@scott-lc8xc Год назад

Any idea why the route would show straight lines after it imports into the Garmin? As in the route does not follow the roads but does straight lines through the country.

@RiversToRidgesRV Год назад

Hey Scott, sorry not sure why Garmin does that. I think the Garmin is just displaying a high-level view of the route, you can always look at the route in detail if needed.

@frebersfix-it7202 Год назад

I had to right click on the segment and select "recalculate" to get the line to follow the road.

@scott-lc8xc Год назад

@@frebersfix-it7202 Thanks, I will try that.

@RiversToRidgesRV Год назад

Hey Scott, just checking back with you, did the 'recalculate' work for you?

@revallanuc Год назад

Thanks for the info. I am going on Route 66 this summer and have broken the trip up into about 8 legs. I successfully downloaded the first leg into my garmin. I expected the file name to show up in my garmin 'Chicago to St. Louis'. It didn't. I just have the 4 legs. .... If I download all 8 legs into my garmin, how will they be differentiated or do I have to download one leg at at time ie. the night before we travel that leg. ... Any tips appreciated.

@RiversToRidgesRV Год назад

Hey Allan, I've entered a whole years worth of legs at one time without an issue. Each leg is identified via the starting/ending points so multiple legs should not be an issue. I started just entering one leg the night before our travel day, just to keep things clean. Also, I ALWAYS verify the route gets loaded correctly into my Garmin, mainly checking for strange or unwanted turns. Glad the video was able to help you

@revallanuc Год назад

@@RiversToRidgesRV Thanks Dan. One of my problems with this trip is that the route Trip Wizard takes is not the original Route 66. Because of that I'm using "EZ66 Guide for Travellers" by Jerry McClanahan to alter the Trip Wizard route to stay as true to the Route 66 as possible as hard as that is ie. pre and post 1930 routes. As a result I end up with lots of turns especially in small towns that were the heart of route 66. I'm hoping my 660 RV Garmin will help me with that. Anyway I wish I could find a Garmin program with route 66 installed. I have a "historic route 66" app on my phone but it is not letting me preview the route ahead of time. .... Just venting. Any tips welcome.

@RiversToRidgesRV Год назад

Allan, Did you try to turn "Drag Route" on in Trip Wizard? (It's located at the top of the main window). With Drag Route turned on you can modify the route to make it closer to what you want.

@revallanuc Год назад

@@RiversToRidgesRV Yes I am using it and it is helpful.

@RiversToRidgesRV Год назад

Hey Allan, glad it's helpful

@dbyers35750 Месяц назад

Why use trip wizard when you have base camp? Seems like a lot of extra trouble.

@RiversToRidgesRV Месяц назад

@dbyers35750 Thanks for watching & writing in. When Trip Wizard is configured with the dimensions of your RV, it will create an RV friendly travel route. I don't believe Base Camp can do that. Dan

@garytaylor4449 Год назад

Dan I followed all of your steps and the trip does not import into my Garmin. Nothing happens when I hit send to device. Help

@RiversToRidgesRV Год назад

@garytaylor4449 it's going to be hard to troubleshoot without actually seeing the issue, but lets try to narrow it down. 1 Are you able to save the trip to your computer as a .gpx file? 2 Is the Garmin connected to your computer? 2 Are you able to import the trip to BaseCamp? 3 When using BaseCamp, does your Garmin show up as a device? 4 When you select "Send To Device", does anything appear on the Garmin? Like any icon that looks like something is happening? Dan

@garytaylor4449 Год назад

@@RiversToRidgesRV okay, so the stops are all showing up on the Garmin. Out of order but the stop numbers are correct. Not sure why it is not labeling it Summer 2023. Answers to your questions are yes. Garmin camp imports. Garmin device is identified and a choice. Set up a folder Summer 2023. Summer trip file appears. Thanks.

@RiversToRidgesRV Год назад

@garytaylor4449 It sounds like it imported correctly, I don't think you'll see the name of the trip, only the stops. You could try to import a simple 1 stop trip to see if that works, then maybe a 2 stop trip, just to verify everything is working. When I upload a trip with multiple stops, I see a list of all the stops in the Garmin, I don't see the name of the trip.

@arkansastraveler7698 Год назад

When I hook up the the GPS to the computer, express shows up on the GPS. Nothing showing that it is loading. When you reboot the garmin, where is the file located.?

@RiversToRidgesRV Год назад

Not sure I understand your question, but the trip is normally downloaded to the computer's "download" directory for Window computers. After the trip is uploaded to the Garmin, you should be able to view the trip in "Trip Planner" then "Saved Trips" Dan

@arkansastraveler7698 Год назад

@@RiversToRidgesRV The gpx shows up in Basecamp and Basecamp recognize my gps and I click OK to transfer file, nothing happens. On mine when I plug gps into computer, express shows up on screen.

@arkansastraveler7698 Год назад

I checked trip planner, nothing there.

@RiversToRidgesRV Год назад

@arkansastraveler7698 I don't see "express" on my Garmin, maybe we have different models of Garmins. Mine is the RV890. If you have a different model, the steps could be slightly different.

@Assassin1959 Год назад

I have connected the 890 to the computer but it is not visible.

@RiversToRidgesRV Год назад

Hi Hector, I assume you mean the GPS is not visible in BaseCamp? I've had the same issue in the past. There are a couple of things you can try. 1. Try a different USB cable when connecting the GPS to the computer 2. Attach the GPS to the computer BEFORE you start BaseCamp 3. If neither of those work, start BaseCamp, then unplug the GPS from the computer and re-attach to the computer Please let me know if any of these help Dan

@RiversToRidgesRV Год назад

Also make sure the GPS is turned on

@Assassin1959 Год назад

@@RiversToRidgesRV Currently, it is functional, but it appears that Base Camp is not fully optimized for Apple Mac as it is running very sluggishly. I am experiencing difficulty deleting a route as it refuses to complete the action.

@RiversToRidgesRV Год назад

I'm sorry, I don't know anything about Mac computers so unfortunately, I cannot help. I hope you find the help you need.