Finally testing the Abandoned Ford Tractor!!

Подписаться 58 тыс.

Просмотров 29 тыс.

50% 1

Well, it drives out of the garage and it looks pretty nice. But does it work nice too? If you missed it, I bought this Ford 861 diesel sight unseen and it ended up needing a full engine rebuild. Over a year later it is finished and time to put it to work! We test it out today with a box grader and an old ripper that we have laying around. What should we do with it next?
Miss the previous videos in the series? Check them out here - • Diesel Ford 861 Powerm...
Have some equipment you think we would be interested in?? Send us an email or drop a comment! Contact email located in the about section of the channel. We are located in Michigan, USA.
FOLLOW US ON INSTAGRAM - / diesejl
Check out our AMAZON Storefront - www.amazon.com/shop/diesejl
As always, thanks for watching! Be sure to like, subscribe and share! Leave any questions in the comments!
DieseJL is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn commission by linking to Amazon.com and affiliated sites.

Авто/Мото

Опубликовано:

26 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@dieseJL 4 месяца назад

What should we do with it now? 5 bottom plow?

@davechristel5408 4 месяца назад

5 bottom might be a bit much 😊

@ronfrance4041 4 месяца назад

5 bottom requires a lot of tractor. For the weight of that machine 3 bottom might right

@ClintsHobbiesDIY 4 месяца назад

It's just a pleasure to look at.

@92nbush 4 месяца назад

Ford videos back in the day had 3-4 bottoms on them I'd love to see a 5 bottom for comedy sake 🤣

@dieseJL 4 месяца назад

It’s funny our backhoe has never had traction issues with all of the weight. If you could get traction it might work

@normpowell3566 15 дней назад

A piece of history. Thanks for restoring it to its glory days.

@larrylane6512 4 месяца назад

Nice to see a young man bringing older tractors back to Life Great Job

@amos4457 4 месяца назад

The reason you're seeing that black oily soot on exhaust is called wet stacking. Just keep putting a lot of loads on it an the wet stacki,g will stop try not to idle it a lot of needs a load on it

@bourbonbeertractorsandprep9335 3 месяца назад

They will slober also known as wet stacking when they idle alot. Usually kicking it up to higher rpms will clear it out. It will do it more in cold weather than hot weather. Nice job on her!

@dieseJL 3 месяца назад

Thanks!

@4321grp 3 месяца назад

@bourbonbeertractorsandprep9335, correct, also It should have around a 180 degree thermostat.

@Military-Museum-LP 4 месяца назад

I would find wheel weights before adding additives/calcium to the rear tires. The rot in the wheels these chemicals cause is not worth it. You did a fantastic job!

@dieseJL 4 месяца назад

Thanks! What about beet juice

@3sparewashers-lg3gf 4 месяца назад

I think beet juice is the way to go.

@Military-Museum-LP 4 месяца назад

@@dieseJL. I don’t know about this. If the beet juice was fermented it would have alcohol contents to keep it from freezing?

@michaelhounsell3888 4 месяца назад

My father in law always used calcium and never had any problems.

@jazzerbyte 4 месяца назад

Great to see it working as well as it looks! Rear wheel weights might be hard to find, but they'd prevent the occasional leaks that rust out the rims.

@dieseJL 4 месяца назад

Beet juice should be ok

@3cl1 3 месяца назад

What a great looking 861, nice work.

@jamesschenk1963 4 месяца назад

Great job on restoring that tractor looks and runs fantastic

@ericwilkinson1771 4 месяца назад

love to see you working with your dad lucky young man

@Military-Museum-LP 4 месяца назад

To rest your concerns take a compression test to monitor the ring/cylinder breaking in.

@christopherweise438 4 месяца назад

You did an awesome job on her Tyler. You should be very proud.

@TKM1951 2 месяца назад

I have binge watched this series . I enjoyed it and was disappointed when it ended . You have given me a lesson in patience and perseverance with this project

@ufoguys1264 Месяц назад

Nice go get some more 😮

@user-dn6ij6lm2g 4 месяца назад

Wow love it , Iwork with one in 70's and it ad power , the plow was just 2 bottom and it could andel A 3 B but rear wheel are not aline with the front , you got tund them closer to fender .

@DH1942 4 месяца назад

Smoke cleared right up! She runs good. Nice job.

@SchnelleKat 4 месяца назад

Dang man! real nice. it pulls that chiesel nice too... your obsession is now mine! I'm actively trying to find a Narrow front lol. LP would be sweet. If you load the tires. Run beet juice it's next too free in price and doesn't corrode the rims. Where are your lights at?! lol. P.s cherish the memories you have of your Grandpa's '801 with the Sherman backhoe. Thems be getting up there in collectability and price..That'd be one heckva restoration!

@dieseJL 4 месяца назад

Maybe someday!

@larrybolhuis1049 2 месяца назад

Agree on the loaded tires, and figger out what's up with that PTO. But fantastic job, looks like it runs fantastically and great power and torque there! Appears to be breaking in and the smoke is getting better. A semi-mounted style plow that pulls from the 3 pt and lifts the rear end with a hydraulic cylinder over a ingle tire seems like it would be a great option.

@jeffbangkok 4 месяца назад

I started plowing and disking at 9 years old on a Select O Speed 800. Dad had 2. With front and rear weights the front would be in the air at times. Pulling a chopper and silage wagon it would spin out upslope due to no differential lock. The 5000 in 1967 cured that. The 800 worked everyday blading out the free stall barns till it was parked in the 90's. With your talents I wish you'd tried a Select O Speed.

@dieseJL 4 месяца назад

Well I can have more than one tractor… maybe we will do one of those someday.

@4321grp 3 месяца назад

The select O Speed is nice to use but they broke a lot, The standard transmission on the old Fords was a lot more dependable.

@gilsongallego2328 11 дней назад

Put a little transmission fluid in the fuel filter. It will lubricate the pump.

@dona6891 4 месяца назад

Great job on that resto looks and sounds beautiful. I have a 61 4000 and i found a set of full pie weights and restord them to help with useing a seven foot box blade to level some of my land here in vermont. Worked great. Also have a new to me 58 861 with snow plow to take some of the of the pressure off of the 4000 for snow removal. The 861 has beet juice in the rears for traction. Both tractors have full sets of chains. You can get into trouble with pie weights on hilly terrain,. Loaded rear tires, if done right are better for center of gravity. Loved your vids, take mama out for dinner and celebrate! Warren in Vermont.

@j.w.3345 4 месяца назад

What a great job! Beautiful Tractor! I really enjoyed the videos.

@gp7013 4 месяца назад

Super cool, great job!💪🏼

@joerodrigues3816 4 месяца назад

What an amazing job mate good on you and your Dad

@harrykeel8557 4 месяца назад

Man, that's a sweet sounding and running little tractor. Congratulations on a remarkable job on getting it running.

@DKTractors 4 месяца назад

Beautiful job

@benjaminsmith5811 3 месяца назад

Great job.

@jamescorless8283 Месяц назад

Nice tractor, looks brand new.

@tripler3724 4 месяца назад

I use Kubotas now, but grew up farming with Fords of that size. We always had fluid in the tires; we use fluid and wheel weights now. To plow, swap rear tires for narrow tread, front is adjustable. To "layout" the beginning set your plow even then adjust to compensate once you have a good furrow. My brother drives 9000 John Deeres, but still uses a couple of old Fords because he loves them 600 and 601.

@frankwrogg2515 3 месяца назад

Great job, would be very proud of that work you did.

@jamesmorrison1884 4 месяца назад

Looks great have a good day.

@lawrencelipon8673 4 месяца назад

👍👍👍👍👍👌Great job purrs like a kitten , no bogging lots of power, and looks so good!!

@Michael_CS615 4 месяца назад

You worked hard to get to here so enjoy!

@user-pu9ek8je7z 4 месяца назад

My 861-D is also kinda slobbery out the exhaust, seems like it's more pronounced in cold weather. It runs really good so I haven't messed with it (yet)

@danielerickson446 3 месяца назад

I like how the fuel tank sits above the motor and muffler. Keeping that fuel warm! Look for a 3-16 John Deere wheel plow with coulters. That Diesel will walk away with one of those.

@DOUGLASLASH-xy4ct 4 месяца назад

LOVE IT!

@larogersii1 4 месяца назад

You did an amazing job on this restore. Thank you for the videos

@danielfoley6345 3 месяца назад

Put wheel weights on your tractor for tillage work. These 861's had plenty of engine power but were known by customers and dealers to be light in weight. All the vintage training films from the old Ford Tractor company displayed these tractors with rear wheel weights. Also, the additional weights would help the tractor not to jackknife on hillsides while attached to implements such as pull type combines or hay balers. I speak from experience as we had both an 860 and an 861 on our hillside farm in southwestern Wisconsin. I enjoyed your presentation immensely as it brought back the many memories of operating our Ford tractors while growing up as a youth! Looking forward to your additional videos on vintage Ford tractors.

@dieseJL 3 месяца назад

I’m going to load the tires first I think

@johnmcmaster8995 4 месяца назад

NICE!!!!!

@hh-qc7rp 4 месяца назад

Absolutely gorgeous

@dakotavogel6907 4 месяца назад

I liked seeing the diesel next to the 800. Should get pie weights for it. 3pt over trailer I just got my first tractor about a year ago, ford 640 with a wagner loader. Now I have a huge addiction to the ford tractors. Rebuild its motor and took it on a 70 mile drive 3 different times

@garyfeltus9801 4 месяца назад

You will need to put a plow or disc behind it and really work it hard to seat the rings in good . Then it should quite slobbing. CK out squatch 253 can't tell what episode it was. That rebuilt cat engine did the same thing. Them old motors had a different metal in them .

@dieseJL 4 месяца назад

Huh that’s good to know. Work it, I can handle that

@duanebolen543 4 месяца назад

If you're not using the PT o, you can take the linkedige on a clutch pedal and move it into the other hole on clutch ride. And then you won't have that clutch pedal up so high. But then when you wanna use the p d o, you'll have to take and reset it in the other hole on the cluch rod

@user-kk9vl6yy6n 4 месяца назад

Шикарные трактора

@royholt6980 4 месяца назад

good to the right color pant

@donbaker9715 4 месяца назад

Mounted plow for sure. That three point hitch was designed for a mounted plow. It has draft control which would would not work with a pull type plow.

@enriquegutierrez4068 3 месяца назад

Most beautiful. I'm going to need some help from all of you guys to help me with my 59 861D.😅

@dieseJL 3 месяца назад

I need a few years before I do another one haha

@MokesEnd 4 месяца назад

Still need to swap the rear wheels over!

@russb257 4 месяца назад

Back in the early 1970s my dad bought a derelict NAA Golden Jubilee from a junkyard in the suburbs of Chicago and we spent a year tearing it down in our garage in inner city Chicago and found that it had a HI/STD/LO ranging transmission inside the bellhousing but no selector handle so we had to source one of those but parts were easier to get then. We rebuilt the engine, transmission, fuel system, hydraulics and even the electrical system. Anyway it's on my parents' farm in north central KY but both parents passed in 99 and 01 and myself and my 3 sisters sold our fifth to my brother and he still runs it regularly. Other than normal maintenance issues the only problem we had since the 70s is the exhaust replacement and brakes. On the PTO there is an extender you can get that attaches to the standard PTO and brings the attachment point out about 4 inches which will alleviate the problem with the hookup with the quick release button hitting the hitch mount. Your diesel 861 is almost an identical twin overall to the NAA we rebuilt.

@dieseJL 4 месяца назад

Yeah the jubilee is a cool tractor. We have one that needs restoring actually.

@garywood5926 24 дня назад

Looks like you exhaust cap was open when trailering. Is there a way to turn it to the side?

@user-bg5tf5tq6n 3 месяца назад

素晴らしい、綺麗なトラクターだフォードトラクター

@austink3919 3 месяца назад

Big fan of this project and your content as a Dad of tiny kids. I have a 4-cylinder 4000D in progress and a 961D waiting for someday. Did you use any sealant on the manifolds to block?

@dieseJL 3 месяца назад

The only place I used sealant was on the rear main seal and any t joints

@92nbush 4 месяца назад

Beautiful tractor, definitely need a 3 bottom 3 point. Trailer plows won't help you any with the draft issue you may run into with the track width being set so wide. It'll still pull, it'll just pull a little harder. If it was me personally I'd just flip the centers of the rims around so the dish is in. Not sure if your going to put a loader back on it but it wouldn't interfere with the loader anyway. To me it looks a little goofy with tires so far out from the fenders but it's your tractor do what you want

@dieseJL 4 месяца назад

Oh yeah wow maybe I could just flip sides in the tires eh?

@kevwelsh7209 4 месяца назад

Get the back wheels moved in and go ploughing! It'll also fit in your trailer better ☺️

@MrHowieZ1973 4 месяца назад

56 horsepower was a ton of horse back in the day

@davidgerber9907 4 месяца назад

On a restored tractor like that don't put calcium chloride in the wheels. Real bad idea. I bit the bullet and put wheel weights on to add weight. Mounted plows on those tractors work better over trailer plows.

@3sparewashers-lg3gf 4 месяца назад

Rim guard/beet juice is as heavy and is non corrosive.

@jameskelley8839 4 месяца назад

Saw the TD 20 backed up where you parked it

@dieseJL 4 месяца назад

Just waiting for more trees

@brianhayes7618 4 месяца назад

3 point 2 bottom 14s shoud work fine so much better than trailer

@donbaker9715 4 месяца назад

That tractor will handle a 3 bottom for sure. I'd look for a 3 bottom 16 inch plow.

@dieseJL 4 месяца назад

Yikes how about 3 12’s

@DH1942 4 месяца назад

Pie weights!!

@jameskelley8839 4 месяца назад

just now figured out you're the same guys who bought the TD20!..

@dieseJL 4 месяца назад

What gave it away?

@dickdavidson3616 4 месяца назад

Thanks for the update. Must feel pretty good after all that effort. Well done son!

@316jd140 2 месяца назад

Nice old Ford tractor.

@michaelastone7758 4 месяца назад

You have the centers on the back wheels backwards

@michaelastone7758 4 месяца назад

Do you have headlights for the tractor

@dieseJL 4 месяца назад

I do not actually

@bobgrauer 3 месяца назад

Tractor data says the 861 is a 3 plow probably a 3/14

@Military-Museum-LP 4 месяца назад

Is that an exhaust manifold leak on your Kubota?

@dieseJL 4 месяца назад

It is. Bummer for a tractor with a thousand hours.

@russwabuda1556 4 месяца назад

mounted

@karenstipp4305 8 дней назад

5 bottoms to much 3/16s would be plenty enough if that helps

@user-ze5lq9vv4c 4 месяца назад

I think ya got too much air in your rear tires air them down a little they bite better plus some wieght

@normanglussier6473 4 месяца назад

3 bottom plow

@jacksonfolwarski952 3 месяца назад

Get a 3 point plow

@sergueiothonucci1638 4 месяца назад

😃😃😃

@Truklodyte 4 месяца назад

Well if you want something bigger I have a running 340 with a dozer blade I will trade you. She isn't a standard 340. She is 8ft wide

@Appl406 4 месяца назад

Old tractor fans (and new tractors and farming) 👇

@ClintsHobbiesDIY 4 месяца назад

Hooray Tyler. She's sweet.

@duanebolen543 4 месяца назад

Well you have 40 plus hp your pump is putting to much fuel you need to work it harder an run it at a higher rpm an not lug it so it burns the fuel

@thomasr.miller5553 4 месяца назад

Hey Fantastic ! 😁My neighbor bought one NEW 1960 . It did not sound like yours .... Red tigers purrrrr. Your ford has an injector problem . One or more injectors are not spraying fuel correctly . that's why you have a sooty discharge with blue smoke . some of the fuel is not being burnt THIS COULD DAMAGE THE MOTOR !! I will guess that you CHEAPED out on the rebuild. Great video thanks