Finding the Dodge Journey engine codes trick!

Подписаться 75

Просмотров 21 тыс.

50% 1

I haven't seen a video about this so I thought this may help some of you. There's a way to find some engine codes without a OBD11 code reader on dodge vehicles with a key fob, this shows you how to do it on a dodge vehicle with a push start button. This trick works on most dodge vehicles be it with a key or keyfob or push button start, just remember you just want the vehicle in the run position on the third turn but with the engine turned off. Plz don't forget to like and subscribe!
Click here for more content:
• Reset P1745 and P0868 ...
• Finding the Dodge Jour...
• Mastering Mindfulness ...
• An introduction to Med...

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@miklosmarinov5775 2 месяца назад

The method works perfectly on a 2014 Fiat Freemont as well. Cheers 🍺

@IsabelMpyana 2 месяца назад

It was thank you so much just needed a jump start

@RHINOTACTICAL 11 месяцев назад

A little confusing but I got it thank you so much great video I have no idea that that was even possible because I have it on my Dodge truck and this was for my journey. Thank you so much well done I subscribed.

@Relevantminded 3 месяца назад

Thanks for subscribing!

@Relevantminded 8 месяцев назад

I have it on my caravan keyfob style but tried it on the push start cycling 3 times quickly and seen that it work for it aswell.

@Westlake 5 месяцев назад

Cool! Going to give it a go! Thanks for sharing this trick!

@Relevantminded 5 месяцев назад

No problem in fact I've seen this trick done on most dodge vehicles out there.

@riler19 8 месяцев назад

My check engine light just came on this morning found ur video and it worked for me but just said done, no code popped up

@Relevantminded 8 месяцев назад

I've had the same thing happen to me but my vehicle Felt like it was running fine so I disconnected. My ground cable on the battery kept it off for about 10 minutes. Put it back on, reset everything. It erased the engine light and then didn't come on again. Sometimes the engine light can be triggered by certain circumstances. But there'll be nothing wrong. But if your engine light comes on and it's flashing while your vehicle is running then you'll want to take it to a mechanic because it's a more serious issue.

@riler19 8 месяцев назад

@Relevantminded it's a solid light. My husband has a code reader and gonna bring it home from work tonight, hopefully it's nothing bad 🤞

@Relevantminded 8 месяцев назад

@riler19 Good luck, if you have 3.6L engine they're usually pretty good I've had to change a couple rocker arms because of ticking noise just small things here and there.

@ginaharris5335 5 месяцев назад

All I heard was music

@dsam625 3 месяца назад

Mine did the same. My brother in law is coming with my other vehicle, tools, and code reader. Pretty sure its a misfire but no code showed up with this trick, just the message done and back to the odometer.

@charlesgordon3721 7 месяцев назад

I got an error code when I got my oil changed and the engine light came on. Resetting it the normal way wasn't clearing it. I saw your video, tried it, got the "done" message, and the engine light went off 🤷‍♂️

@Relevantminded 6 месяцев назад

Thanks for sharing

@biggalljzionkemp9719 Месяц назад

Our check engine light came one recently . I did the code check you recommended and both times it said done . Does that mean I still should get it scanned by reader or is there a way to get check engine light turned off on my own ?please

@Relevantminded Месяц назад

@@biggalljzionkemp9719 I'd purchase an OBD2 reader for yourself that can read and erase codes and try tightening your gas cap sometimes that can cause an engine light to come on.

@traceyoflaherty9422 Месяц назад

I tried this twice and it didn’t work

@Relevantminded Месяц назад

@traceyoflaherty9422 you have to do it fast and not put your foot on the brake at all and 3 rd time land on start in-between doing it you have to open and close your driver door to reset the procedure.

@Heckaton 25 дней назад

Woooow.

@IsabelMpyana 2 месяца назад

My car won’t even have the interior lights on it won’t start or make any clicking sounds

@Relevantminded 2 месяца назад

@IsabelMpyana that sounds like a bad battery and or alternator

@Likeafartinthewind 17 часов назад

Nothing happens in my 2016 journey

@Relevantminded 17 часов назад

@Likeafartinthewind as soon as you close the door when you step into your vehicle without stepping on your brake pedal cycle quickly on your push button 3 times ending on Run ot should do it. If not turn it off open and close your door and try the procedure again.

@Likeafartinthewind 16 часов назад

@@Relevantminded I just tried again it still isn't putting out any codes but will say done after a moment

@Relevantminded 14 часов назад

@Likeafartinthewind that means there aren't any generic codes if your engine light is on or on and flashing then the next step is grabbing an OBD2 Scanner as there could be something else going on. Try disconnecting your negative battery terminal for ten minutes then reattach it and make sure your battery connectors are tight and see if the check engine comes on again. If it does then try a OBD2 Scanner.

@Likeafartinthewind 14 часов назад

@@Relevantminded thank you I will be trying this shortly.I do appreciate it

@Relevantminded 14 часов назад

@Likeafartinthewind I hope it works out for you, ive too have been through all these motions and bought the tools and scantools when nothing else works to be able to make the repair if possible myself or at least know what needs done when going to a mechanic I can trust.

@MathewBebout 4 месяца назад

Don't ever play music in the background again. 😡

@Relevantminded 4 месяца назад

lol well i love music and its my channel so enjoy, I did change the song maybe you'll like it more dance dance dance but don't think for one minute you have any authority over me! Kick Rocks!

@loveelijah1617 8 месяцев назад

I did not see the code.

@Relevantminded 8 месяцев назад

It's where the odometer is if you cycle the button 3 xs stopping on run on the 3rd cycle

@loveelijah1617 8 месяцев назад

I saw the word DONE then it changed to odometer@@Relevantminded

@AsaGreen-i2u 8 месяцев назад

What is the code used for ?

@Relevantminded 8 месяцев назад

@user-qf6bj2ix3w it's a generic engine light code to give you an idea why your engine light is on. It's a tool for Diy'ers to see if it's something they can fix themselves, and for others to educate them so a bad mechanic doesn't try to take advantage of their customers.