FINDING THE ENGINE COOLANT LEAKS!! EP19 Ran-day Sailboat Renovation

Подписаться 89 тыс.

Просмотров 10 тыс.

50% 1

Get 5% OFF @ TotalBoat - www.totalboat.com/yachthunters
The next leak to deal with is #2 on my priority list -- the Ford Lehman 2712e engine coolant leak. It's been leaking and I can't see where it's coming from.... so I embark on a long journey of overhauling the engine room. I take a trip to Current, makers of Silent Running SR1000, a sound-deadening paint as a way to further reduce the noise & vibration.
============== Products I swear by (these are affiliate links)
3M 4200 black - amzn.to/3TcHV3B
Knee pads - worth the jokes -- amzn.to/3TarZim
My go-to for a headlamp - amzn.to/49vhITt
------ LED Lighting ------
Waterproof LED strips 12v - in Warm White dimmable -- amzn.to/4asHPv7
Waterproof Neon Red 12v Strip -- amzn.to/3Vn2KuL
Waterproof Neon Warm White 12v - amzn.to/4cp9Y7u
LED Connector Terminal Blocks - amzn.to/3Tult4K
LED Solderless connectors - amzn.to/3vjptgG
LED Strip connector kit - variety pack -- amzn.to/4a8eeHa
LED Strip Connector T, L and Straight - amzn.to/4anah0N
Mini 12V battery for testing & mockups -- amzn.to/3VrbT5y
Heat Shrink kit to waterproof connectors - amzn.to/3TIvFrY
-------- Sound deadening --------
Silent Running SR1000 -- bit.ly/4a1mXL8
Sound deadening mats - amzn.to/3PvyBFN
Aluminum High Temp Tape (to protect seams) - amzn.to/3Tuzkbx
Sound deadening foam - amzn.to/3IM19XN
Plastic large fasteners/washer - amzn.to/3PSUyir
Segments --
00:00 - Intro
00:55 - Finding a ford lehman coolant leak
02:35 - Coolant leak testing kit
05:37 - Engine room demolition
08:58 - Field trip to see Silent Running
14:27 - Painting the engine room
16:50 - Sound-deadening Mat installation
18:06 - Install LED lighting

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@brentchalmers1436 4 месяца назад

I'm a big fan of T-bolt hose clamps. I've been gradually replacing the screw style with T-bolt style. The peace-of-mind T-bolts provide is worth the extra cost. Great looking engine room when your done!!!!!

@YachtHunters 4 месяца назад

Going on my shopping list! Thank you!!!

@karaDee2363 3 месяца назад

Great job! Removing all that old insulation looks like it was a bear of a job and then cleaning it all up and painting and then reinstalling new insulation looks so tedious and time consuming but the end result looks so much better. It's good to do this now while you're still young and flexible, because once you advance in age you won't be able to do that anymore. Please tell Captain Q I said hi, and Hope he's well❤

@PacificNorthwestHillbilly 4 месяца назад

Glad to see that others recommended t-bolt clamps, they are so much better than hose clamps. Keep up the good work!

@YachtHunters 4 месяца назад

yup, that seems to be unanimous.... thanks!

@vincentdsnt 4 месяца назад

Right.....Led light the heck out of that engine room !

@YachtHunters 4 месяца назад

You’ll see me from space now!! 😎

@dougfaulkner6799 19 дней назад

Outstanding job young man. Had a stroke in October so im just now catching up with your project. Patience is key to a good refit. Any time you take now will pay off for years to come.

@briancarlin1817 4 месяца назад

Wow, what a transformation of the engine room. Let there be light - everywhere! Glad Betsy was their to help out getting the job done. The sound deadening job will pay off big time with reducing noise and heat if you have good ventilation.

@YachtHunters 4 месяца назад

There seems to be decent ventilation with some exterior louvers and a 4” hose. There is a blower motor setup too… whether it works is a different story… good thing to think about while I’m sitting around down there! Thanks Brian!

@bertsanford7943 4 месяца назад

Very much enjoying following your journey. While the work now is hard, once you're done you'll know every system inside and out.

@YachtHunters 4 месяца назад

getting there day by day... each day becomes a lot more fun with the added confidence. thanks Bert!

@garyaasden2583 3 месяца назад

Randay excellent work for a jack of all trades master of none like the rest of us. My opinion, the stainless clamps pictured are not radiator clamps rather they chew into the rubber over time causing leaks. The more you tighten the greater the chance of future leakage. Pop open your auto hood and look at the radiator clamps These are what you need More expensive but what the job calls for. Time & Tide wait for no one.

@YachtHunters 3 месяца назад

yes... thanks very much for pointing me in the right direction. Another viewer suggested all new hoses which are actually not that expensive ($90USD for the full kit) so it seems like new hoses and clamps could really make things even better. cheers!

@andrewmoylan6295 4 месяца назад

G'day Ran-day, you're becoming quite the boat wizard mate....looking MAGIC ....Excellent job so far

@VonBluesman 4 месяца назад

Ran-Day, I am glad you are putting in a lot of effort getting your boat seaworthy. Captain Q, Sea Dog, and I really like your First Mate. You keep on making all the right choices. 👍😎✌️

@YachtHunters 4 месяца назад

Thanks VB!! Much appreciated!

@mattevans-koch9353 4 месяца назад

Great work on cleaning up the engine bay Randay. Thank you for brining us along on this adventure.

@YachtHunters 4 месяца назад

Thanks, MEK!! Much appreciated :)

@dennisfromoz6436 4 месяца назад

Double Reversed Clamps....two-way tightening. Wins. Should double up clamps on all and every liquid line/hoses. Amazing worry free results. Onya mate......👍

@YachtHunters 4 месяца назад

Love it… great tips, thank you!

@Rottingboards 4 месяца назад

The lighting is amazing!

@bendaves77 4 месяца назад

That's quite the improvement Ran-Dayy.. I would have torn everything out and started fresh resulting in more work for myself.. gotta love your taste in music also

@YachtHunters 4 месяца назад

Thanks! Yeah I was tempted… but couldn’t create a lot more work and expense by starting from scratch. Prob have to plan that for a future offseason… thanks!!

@mememe5231 4 месяца назад

Great work!

@basilbrushbooshieboosh5302 4 месяца назад

Excellent ep., thanks. Got those links down and will use in the future. Love that paint.

@ram07ish 2 месяца назад

Led light strip is great idea. Cheap and very effective.

@gaanyam3530 3 месяца назад

Hey Randay, another incredible video. Outstanding job on the engine room, pause for applause 👏 👏 👏, and I doff my 🧢 to you sir

@YachtHunters 3 месяца назад

Thanks very much!! Much appreciated!

@valerieb.4912 4 месяца назад

Randay, I am amazed on what a difference your engine room looks! Excellent idea with the lighting. You should be proud of yourself. Now you can have lunch in there or read a book.Betsy, thanks for helping. Happy Sailing ⛵

@Thagomizer-U235 4 месяца назад

The pressure tester on a cold engine doesn't always get all the leaks because the coolant acts different when hot and moving. But 9 times out of 10 you got them.

@ricktarkowski1027 2 месяца назад

You lighting project is BRILLIANT! pun intended

@YachtHunters 2 месяца назад

Well played!! 😂

@SavingMaverick55 4 месяца назад

Great work. That paint and those light strips will definitely be something I'll look at when rebuilding my boat's interior.

@FireyFlyman 4 месяца назад

Always love your episodes!

@YachtHunters 4 месяца назад

thanks very much... that means a lot to me!

@MattDV 4 месяца назад

Hey Randy, hey Betsy! And yes you def. got your yoga workout this day. Lol

@YachtHunters 4 месяца назад

Hey Matt!! You know the workout well 👍

@davidfinney6855 4 месяца назад

Engine room looking great!

@YachtHunters 4 месяца назад

thanks David!! :)

@josephshultz6726 4 месяца назад

pretty awesome Ran-day!

@a1leadership 4 месяца назад

I get so much inspiration and ideas from your videos... Thankyou

@YachtHunters 4 месяца назад

I'm so glad! thank you

@starloomoon9919 3 месяца назад

Hello, my grandfather really likes watching your videos. We're from Argentina and he doesn't know English. As a birthday gift, I want him to be able to enjoy your videos even more by being able to understand what you say. So, could you put the spanish translation in your videos, please?

@symphonyfarm2009 4 месяца назад

Ran-day - getting some split conduit and enclosing the wires and mounting them with brackets to a hard surface is going to change your life! And tidy your engine room extremely well!

@livingforsail 4 месяца назад

I’m really curious to hear the engine room results. I’ll have to check up on the roll on product 🤔. It’s looking good! Also, loved how well the Rage paired with the smooth jazz… 🙌

@YachtHunters 4 месяца назад

not sure it paired that well....🙄 but it kept the juices flowing to keep pushing... I'm looking forward to seeing if it reduces vibration as well as the demo. I'm a bit of a skeptic but even if it's 20% better, that would be great. thanks, jon!

@sailingresolution8440 3 месяца назад

Nice job!

@YachtHunters 3 месяца назад

thanks!

@garywinslow2973 4 месяца назад

Very nice! What's next? Spring is almost here. Need to wrap this all up and get back in the water!

@YachtHunters 4 месяца назад

agreed... got one more big leak - the propane system... some bilge pumps and hoses. I am hopeful to replace the batteries and add in an aft head with a holding tank... then its time to prep the bottom, button her up and get her splashed!

@davidzemke2549 3 месяца назад

Outstanding video! Keep up the positive attitude and nothing can stop you!!!!! Amazing application for Velcro and led lights... Question if you hung sheets covered in SR 1000 in the enginroom ... I think of hanging sound damping panels... Would it absorb a reasonable amount of sound? HOW much would it heat up the room? lol just thinking in side the box... :-)

@YachtHunters 3 месяца назад

Travis from Silent Running said painting the sound panel sheets was totally acceptable. The heat gain is supposed to be around 1 degree F - so essentially negligible. I'd think about adding that additional layer if it's not as quiet as I would like when I fire up the motor this spring. I think the one big appeal of SR1000 is that it changed the tone & dampened the vibration. It was quieter but not massively muted.... the difference for me was fewer rattles and lower/duller sounds. Thanks for the words of encouragement!! cheers

@vincentdsnt 4 месяца назад

It looks like you are doing a great job........I did sound proofing for Ford In Dearborn on prototype Lincoln Continentals then later on F350 diesels. You can also slide a blanket under the engine you will have to replace it from oils but make it removable. You can do the same over the engine blanket the valve cover and down a few inches........Think of a tent over the top on the valve cover. Look under the hood of an f-250/350 diesel the blanket affixed to the hood and well in the engine compartment. You have a good start you can add on later. If you can deaden the sound before it gets to those well deadened walls that's a big plus........Like I say if you are not happy with the level of noise do some experimenting . Good Luck.

@jpkatz1435 4 месяца назад

Nothing better then hearing from the guy that's done the work! Thanks.

@YachtHunters 4 месяца назад

Great tip, thank You! I’m sure I’m not the only one to appreciate the feedback from an expert. Cheers

@scyz2807 4 месяца назад

Great episode Ran-Day! : - )

@YachtHunters 4 месяца назад

Thanks!

@tacosdecamaron 4 месяца назад

Keep on going Randaaaaay!

@YachtHunters 4 месяца назад

Thanks!!

@CaptainKseadog1 4 месяца назад

Hi Ran-day, Any work is better with friends, tunes & Agave. You ROCK brother!😁

@YachtHunters 4 месяца назад

Well said!! Couldn't agree more. Thanks Kirby!!

@Thagomizer-U235 4 месяца назад

What a relief that the coolant leaks were all hose clamps. But hard to believe you didn't see any of these after all this time of dealing with it.

@clivestainlesssteelwomble7665 4 месяца назад

Cork and Basalt matting are both good for soundproof they are also fire ressistant or proof.. Insulate the engine box and isolate it from the hull. They mount heavy machinery on thick cork pads ressistant to oil etc. They do caps with a hard plastic inner shell not like a proper hard hat but great for avoiding bashing your scalp on protuding screws bolts and cables.

@YachtHunters 4 месяца назад

interesting... I think the legacy mat was basalt (the distinctive yellow) and the one that disintegrated on the doors might have been cork. It will be interesting to see how this mat + foam + silent running performs. I know just how loud it was before so I'm very hopeful I see a reduction. I like the idea of isolating the engine and reducing the vibration at the source. I also like the plastic cap in a hat... thankfully the baseball cap worked pretty well. For most of this winter, I've been using the knitted cap which has been great. great stuff, CSSW!! thanks

@clivestainlesssteelwomble7665 4 месяца назад

@@YachtHunters Basalt mat tends to be dark grey or slight brown tinge and literally like a carpet.. they also use it to wrap exhaust manifolds to reduce heating in the engine bay and exaust noise .. See Basalt ... And Guru ... Safe less itchy and inert. Cork can be had in many thicknesses but theres a u tube clip showing a sample with a bunsen burner flame being played on a section for minutes ..it charcoals but doesnt ignite. The other thing is any smoke is none toxic and theres no off gassing like you get with foams and plastics. U tube keeps deleting links/shares..its frustrating 🤷🏻‍♂️

@YachtHunters 4 месяца назад

RU-vid should pump the brakes deleting links… I need those links!! 😂

@LoganJohnson-lm2bh 4 месяца назад

Hi Ran Day .Well I guess we can't call it the dungeon room anymore .I'm very glad you were able to find those pesky water leaks and were so easy to fix ( big bonus there .) Also with the sound deadening Paint .the hardest chore was in the prep As always .Overall the change is dramatic .and one of the most dreaded jobs of owning an old boat is now done .I tip my cap to you for another well gone job .O and one thing more as a young man I did some filming myself .so I can appreciate the time it takes to do all the set up's and filming and editing .If only they had invented all this digital stuff back in my day 😂O well .

@YachtHunters 4 месяца назад

I've developed my share of film and even spliced a few super 8mm movies!! It's easier to put together than the old days.... but, you're right, it takes an additional moment or two of planning to make sure that I can share it with everyone. I really enjoy both fixing the boat and putting together the episode to share so I'm grateful that you are enjoying it. It's definitely taken me a bit longer to put these episodes together as they are all a little different and take days/weeks/months to pull together all the matieral. Cheers, Logan!

@LoganJohnson-lm2bh 4 месяца назад

😁Hi Ran Day Every one is a gem and well worth waiting for .Maybe you could find a young up and coming film maker to let him hone his skills by letting him set things up and doing some editing .You could oversee his work and tweak it until they get it JUST right .and if they like to sail that would be a bonus you could let them help on the boat .@@YachtHunters and thank you for your prompt reply .

@nick2300 4 месяца назад

Having spent many years installing various noise reduction products I was interested to see the paint product. Unfortunately the factory test was questionable as the chap had his hand on the 'quieter' box. That would definitely reduce the noise level. However the silver lining you used will reduce your noise problem. The entire room looks great. Well done.

@YachtHunters 4 месяца назад

I’m a skeptic as well… it’s part of the reason I made the trek down to see it in person. I can tell you the demo was quite loud in person and his hand being on it did not appear to alter it. Looking at the footage I can see how it might appear like a snake oil demo though. Those boxes were quite heavy steel diamond plate (guessing 150lbs each) so I would think his hand would have to weigh a lot to have an impact on the noise. I think the biggest thing that struck me was the pitch and reduced vibration and not necessarily the total loudness reduction. (It was still loud) Seeing the thickness after applying it, I can see how it might provide some vibration dampening as it’s appears like a 1mm rubber coating over everything. The proof will be when I splash and fire up the engine… to see if it made a noticeable difference. I’ll definitely report back on it 👍👍

@nickpitera7891 4 месяца назад

Your engine room is huuuge! So much room for maintenance activities… Cheers.

@YachtHunters 4 месяца назад

thanks Nick! totally agree... I'll. have some more details on the cleanup and future maintenance too. it's getting more fun now!! :)

@usdohs 4 месяца назад

Pocket full of shells is so not the soundtrack I was expecting 😂 I LOVE it!

@YachtHunters 4 месяца назад

A curve ball!!! An old adrenaline booster song from bike racing days.

@TheBiggestGuyEver 4 месяца назад

Did you get some before and after decibel readings to measure the effect of the new sound deadening? (Are you able to run the engine when you’re on the hard?)

@clivestainlesssteelwomble7665 4 месяца назад

You can buy rope lights basicly led strips inside a clear plastic tube ... They are waterproof bash proof and even waterproof.

@YachtHunters 4 месяца назад

yeah, I had some of those on my outdoor deck that have lasted forever. The only dowside is that they aren't quite as bright for some reason. I do like the bashproof part too.. that's pretty key!

@Useless_Knowledge07 4 месяца назад

A "T" handle 40lb torch wrench works great for hose clamps. Plumbing supply stores carry them.

@YachtHunters 4 месяца назад

good thinking... I actually picked one up a few weeks ago... so much easier! thanks! (you might need to change the handle to Useful Knowledge)

@peterc.anderson1840 4 месяца назад

Thank you for the video! I miss Captain Q, just wanted to say that. Hopefully he is well. Any updates?

@amelbeecher6097 4 месяца назад

next quick test I would suggest is an engine compression check.

@YachtHunters 4 месяца назад

Maybe I don’t want to know!! (I do… but my wallet is too skinny and afraid) 😂

@bradwhite6254 3 месяца назад

Great video, could you check your first LED link it comes up as connectors for me. Thanks.

@YachtHunters 3 месяца назад

great catch, thank you. here's the proper link: amzn.to/4asHPv7

@jsn1970 4 месяца назад

Just curious why there are so many cables, what is the purpose? Are they all in use and useful? I like your videos 😊

@J.D.Brown555 4 месяца назад

Question regarding the LED lights: What do you use for an On/Off switch with these lights?

@YachtHunters 4 месяца назад

Great question... I'll cover this in an upcoming segment but here's a spoiler link: amzn.to/4ctrure - you'll see them in an upcoming segment where I clean up the electrical. they are great so far!

@J.D.Brown555 3 месяца назад

@@YachtHunters These are perfect! Thanks very much for letting the cat out of the bag.

@gnsmk357 3 месяца назад

Understand cost limits and just how large this project is, this idea may seem nonsensical. I would get new motor for the boat. Some people are finding that electric sailboat motors are the answer to a lot of issues. They pay for themselves over time because no more fuel cost or issues with bad gas. Check out a Electric Inboard. You may find a company willing to to refit your boat for free. No other sail boat of your size has yet done this. Great work. Great video.

@YachtHunters 3 месяца назад

that's definitely been on my mind. For now, I'm going to save my pennies and keep the old iron sails as happy as possible. It's a big undertaking but I love the idea. A hybrid setup with a generator would be neat - but would be neat to use regenerative or solar so I could ditch the diesel altogether. I did look into the cost for a 70-80hp electric motor and the total was up in the $40-50k USD range... I like the direction you're thinking!

@seanrhone5306 4 месяца назад

Surprised you were not wearing a respirator while painting the engine room. But it's looking great. How is Capt'n Q?

@MCallsen 4 месяца назад

Betsy for the win!

@YachtHunters 4 месяца назад

Totally!!! She's been an enormous help - behind the scenes as well ❤

@patrickjames1080 4 месяца назад

Brilllllliant - all thats missing is a nice tin of Dinty to warm things up.

@MaShcode 3 месяца назад

One sound proofing trick I use is to avoid running the engine. 😂 I read somewhere that Silent Running contains nano vows of silence.

@YachtHunters 3 месяца назад

i like that trick an awful lot!! 😂

@Rottingboards 4 месяца назад

Rage against the Machine was not the music I thought you would select. LOL

@YachtHunters 4 месяца назад

😂🤷‍♂️

@josephcrawley3095 4 месяца назад

What did your decibel count go down to?

@YachtHunters 4 месяца назад

we will have to find out when I splash in the spring... I'm hopeful to see about a 10dB reduction but would be happy with 5-6 and a little less vibration.... it will be interesting!! thanks

@danpease8395 4 месяца назад

Did you tell the Silent Running guys that you were going to cover their paint with the aluminum stick on panels?

@YachtHunters 4 месяца назад

I did… they said I could even paint it over on top of the panels if I chose. They also suggested painting it on engine mounts or anything else that was subject to vibration. Looking forward to seeing the outcome on splash day…

@jeffwatson4908 4 месяца назад

The romance of sailing the high seas is somewhat compromised at times 😎

@jeffwatson4908 4 месяца назад

Wouldn’t want to do that on hot summer days.

@YachtHunters 4 месяца назад

I did change the oil of the engine and generator on a super hot day and the air flow made it pretty tolerable... we'll see how it is this summer! :)

@sailorjedmon 4 месяца назад

Hi Randall. Go buy a pool noodle or pipe insulation and use it to temporarily cover those steering cables. Your hair and scalp will thank you!

@YachtHunters 4 месяца назад

pool noodle is a great tip... my scalp needed you awhile back... thankfully, I had the steering cables out for a good chunk of time so I could move a lot more freely... (spoiler: I am replacing cables & quadrant). thanks!

@bobloblaw1720 4 месяца назад

I would like to see a third demo box painted with regular old paint.

@YachtHunters 4 месяца назад

interesting idea... I am really looking forward to actually testing out the efficacy in the field. I know just how loud it has been and certain vibrations that reverberate throughout so I have my fingers crossed it will be a lot more tolerable. I also plan on using the motor as little as possible... so maybe it will be totally silent most of the time ;)

@bobloblaw1720 4 месяца назад

@@YachtHunters every little bit counts. And it looks great.

@YachtHunters 4 месяца назад

Love your handle name btw… our family never fails to laugh about your law blog 😉

@JP-lz3vk 4 месяца назад

Yep, that's why we're here - to watch Silent500 dry...

@YachtHunters 4 месяца назад

😂

@danpease8395 4 месяца назад

You should replace every bit of rubber on that engine.

@YachtHunters 4 месяца назад

That thought definitely cross my mind. I might have to add that to the list!! 🥵

@o_oo_o1812 4 месяца назад

So. Did we fox the coolant leaks or not?

@YachtHunters 4 месяца назад

yes... it was a bit anti-climatic... simply tightening the two hose clamps seems to have done the trick. It is possible there is a 3rd leak on the starboard side but after a 2nd round of pressure testing it seems all leaks have been solved. thanks!

@georgeburns7251 4 месяца назад

You foxed it

@YachtHunters 4 месяца назад

👍👍

@YachtHunters 4 месяца назад

😂

@jasonatkinson635 4 месяца назад

What is that paint

@YachtHunters 4 месяца назад

it's called Silent Running SR1000.. you can find a link to it in the description below the video (it's a link to defender marine). cheers

@davidfinney6855 4 месяца назад

You probably know this, but in case not… There are marine hose clamps that are more expensive, but stainless and they are a solid band so there is less stress on the hose material

@YachtHunters 4 месяца назад

I'm definitely taking notes here.. another viewer mentioned constant-tension clamps as well... seems like I coul duse an upgrade or two on the clamps for sure. thanks!

@herberthahn6964 3 месяца назад

Hi Randi . Do you need sun glasses to work in your engine room now?

@YachtHunters 3 месяца назад

Hahaha…Maybe welding goggles… it’s glorious!! 😂😎

@friarfoxz 3 месяца назад

Sorry to interrupt Randal but what happened to Captain Q ? There is no closure here. I'm sure a lot of us want to know but never got the answer. Thanks in advance

@cals4200 4 месяца назад

Ran- day I wouldn't put those let's in to permanent. They burn out I don't care who made them. So seeker used them and out of the whole build that is his main complaint. He used them everywhere and says they are a pain.

@YachtHunters 4 месяца назад

yes... I definitely had the thought about longevity as well. I tried to keep it somewhat modular so i could pop in a new strip as needed. I'm hoping the lights last 3-5 years... although they are rated for 50,000 hours of use. they are less than $1/linear foot so I'd be pleasantly surprised if they make it over 1,000 hours.... and if I'm in the engine room for more than 1,000 hours, lighting may not be my only problem. Thanks, Cals!!

@gking5522 4 месяца назад

Ah Randall, You steal my comments 3 minutes before the end, before I get to make them! So, Welcome to "Boat Yoga" class. If this is your first visit, please swing by your local WalMart and pick up a giant bottle of Ibuprofen before you get home... You're gonna need it! BTW, a sailor's watch cap worn while working in the engine bay, under the hull, or while in a locker will save your hair and the bill of that golf hat doesn't run into things. Sadly, I learned that trick too late to escape the "Samurai" hair line. 😪

@jpkatz1435 4 месяца назад

"Boat Yoga", YES.

@YachtHunters 4 месяца назад

yes definitely getting the Costco sized bottle as I haven't reached Yogi status yet!! cheers G king and thanks for hte extra support :)