Тёмный
No video :(

Firmware Upgrade for Catalyst 9200 and 9300 Series Switches | Simple to Perform Upgrade 😎👍😎 

Advance Technology by Rana
Подписаться 1,9 тыс.
Просмотров 26 тыс.
50% 1

In this video and channel ‪@Advance_Technology_by_Rana‬ We are going to discuss a new feature that you need to know about if you're updating your #cisco Catalyst 9200 or 9300 switches' firmware with a USB flash drive. This new feature will allow #networkengineer to more easily manage and troubleshoot #networking issues.
If you're using the #catalyst 9200 or 9300 series switches in your network as access or top-of-rack switches, then be sure to watch this video to learn about the new features available with the firmware update! This update is currently available on the #ciscosystems website, so be sure to check it out !
Step 1: Clean Up flash to ensure at least 1GB of space in flash to expand a new image:
Switch# install remove inactive
Step 2: Copy new image to flash, USB drive should be 2 - 8 GB Insert USB to the switch
Switch# Show usb0:
You can see the image on the USB
Step 3: Then copy image from usb to bootflash:
Switch# copy usbflash0: bootflash: IOS Image.bin
Switch# dir flash:*.bin
Switch# verify /md5 flash:image.bin
Step 4: Set boot variable using
Switch(config)# no system boot all
Switch(config)# boot system flash:packages.conf
Switch(config)# no boot manual
Switch(config)# exit
Switch# write memory
Step5: verify the boot variable is set to flash
Switch# show boot
The output should display BOOT variable = flash:packages.conf .
Step 6: Software install image to flash:
Switch# install add file flash:new-image.bin activate commit
Step 7: Verify that we are running the new image:
Switch# show version
This feature is really helpful and will help you optimize your network performance. Thank you for watching !
Don't miss out - subscribe now 😃😃 ‪@Advance_Technology_by_Rana‬👍👍
#ccna #ccnp #networking #technology #ccie #it #security #datacenter #tech #training #router #networksecurity #eveng #paloalto #firewall #paloaltotraining #networkingfundamentals
*****************************************************************
Firmware Upgrade for Cisco ISR 4000 Series / 4331 Router
• Firmware Upgrade for C...
*****************************************************************
*****************************************************************
Firmware Upgrade for Nexus 9300-FX Series / 93180YC-FX
• Firmware Upgrade for N...
*****************************************************************
*****************************************************************
Firmware Upgrade for Catalyst 3850 Series switches
• Firmware Upgrade for C...
*****************************************************************
Contact : 966546927848 (Mobile)
Al Riyadh , Saudi Arabia
Email: jahanzaibamin@hotmail.com
Follow us on LinkedIn: / jehanzaibamin
Follow us on Facebook: / profile.php
Thanks for watching this video.
Good Luck 😃👍😃
Jehanzaib Amin Rana
🔻
"Yoitrax - Jade Dragon " is under a Creative Commons (CC-BY 3.0) license
/ @yoitrax9012
Music promoted by BreakingCopyright: • 🐲 Royalty Free Electro...
🔺
=========================================================
Las Vegas Fremont Street: • Las Vegas Fremont Stre...
Football Show Riyadh Exhibition Center Part-1: • Football Show at Riyad...
Football Show at Riyadh Exhibition Center Part-2: • Football Show at Riyad...
Ertugrul and Halima Sultan Tomb in Sogut : • Ertugrul Gazi and Hali...
Sultan Ahmed Mosque Istanbul: • The Blue Mosque | Sult...
TurgutAlp grave in Inegol: • TurgutAlp grave in Ine...
Chef Czn Burak Restaurant Istanbul: • Chef Czn Burak Restaur...
My lovely travel experience of Istanbul: • Video
Riyadh's VOCO Hotel Life in Saudi Arabia 😋😋 • Riyadh's VOCO Hotel | ...
Stray Dog at Hagia Sophia Mosque Garden Istanbul: • Stray Dog at Hagia Sop...
Istanbul City Tour-An Unforgettable Journey of Turkey👍🤩👍: • Istanbul City Tour - A...
Travel to Istanbul | Istanbul should be your next destination 🤩🥳🤩: • Video
Food in Istanbul | KUZUBEYI' lamb must-try in Istanbul 😋 😋: • Food in Istanbul | KUZ...
World's friendliest Cat found in Istanbul streets😸 😹 😻: • World's friendliest Ca...
Showtime in CznBurak Restaurant | Food in Istanbul 😋🥳🤩: • Showtime in CZNBurak R...
CznBurak Restaurant Istanbul | Unbelievable Dinner in Istanbul: • CznBurak Restaurant Is...

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@meischoice
@meischoice 6 месяцев назад
Simple and easy to follow process.
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 6 месяцев назад
Appreciate your feedback
@samnnamani
@samnnamani Год назад
This is the ONLY video that correctly shows how to upgrade this platform in INSTALL MODE. I dont understand why many 9300 series upgrade videos on youtube falsely claim to run Install mode but are actually running Bundle mode with the 'Request Platform command'. Bravo Rana
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Thanks buddy Really appreciate your feedback. There is soon a video for stack IOS upgrade with 5 catalyst switches. 😎😎
@samnnamani
@samnnamani Год назад
@@Advance_Technology_by_Rana Oh great! I just did an IOS upgrade from 17.3.3 to 17.6.5 to a 5 and 6 stack 9300s. Was looking for a video for more clarification and happened on your video. I wanted the security of a rollback which the Install Mode offers to those stacks which I found was not gon work if you go the Bundle route. Found out the hard way on a single 9300. Had to reload it with a 17.3.3 bin afterwards.
@rajeevbawari7222
@rajeevbawari7222 11 месяцев назад
Very nice…
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 11 месяцев назад
Thank you! Cheers!
@libinova
@libinova Месяц назад
Thanks
@vinaykumars3042
@vinaykumars3042 Год назад
Superrrrrrr❤
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Thank you Boss for Liking.
@rferriolo
@rferriolo 8 месяцев назад
Well done... good detail....
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 8 месяцев назад
Thank you! Cheers! 🥂
@rajeshkanna918
@rajeshkanna918 6 месяцев назад
Awesome thankyou
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 6 месяцев назад
You’re welcome 😊
@sujitkumarpanigrahi7506
@sujitkumarpanigrahi7506 Год назад
Yes good one and the exact info
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Appreciate your feedback 😎😎
@marcgroves7574
@marcgroves7574 Год назад
Vey Helpful cheers
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Glad it helped 😊 😊
@vintechworld
@vintechworld 11 месяцев назад
Thank you. The best video when all others failed. Highly recommend
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 11 месяцев назад
You're welcome!
@user-lz8jx4ec4d
@user-lz8jx4ec4d 6 месяцев назад
Thank your video.good job
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 6 месяцев назад
So nice of you 😎😎
@S.M.A.Batista
@S.M.A.Batista 2 месяца назад
Perfect!
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 2 месяца назад
Thanks 🤩
@utsavrai4173
@utsavrai4173 9 месяцев назад
❤❤❤one of the best video...🎉
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 9 месяцев назад
Love you bro 😎
@DilipKumar-xr9ol
@DilipKumar-xr9ol Год назад
Thanks very nice
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
So nice of you
@CookingBakingDiaries-ym9jb
@CookingBakingDiaries-ym9jb Месяц назад
The way you explain things is brilliant, not time consuming and to the point. Do you have the upgrade procedure for ASR 920 via USB please?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Месяц назад
No I don’t have for ASR 920 but I uploaded for ASR 1002 router in play list.
@ChristianQK
@ChristianQK Год назад
How we say in SouthAmerica: Eres un crack!!! I really appreciate this content, You earn a new SUB ! :)
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Thanks for the sub ! 👍😃👍
@tamoorali5768
@tamoorali5768 11 месяцев назад
geo rana sb
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 11 месяцев назад
Thanks 🙏 buddy 🤗🤗
@melic76
@melic76 2 месяца назад
Thank you sir.. just did my first update cat 9200 ty ty ty
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 2 месяца назад
Really happy that it’s work fine for you.
@nonesizefitsall3816
@nonesizefitsall3816 11 месяцев назад
Amazing work!!! Just received a 9200CX and needed to update. Thank you and greetings from Germany
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 11 месяцев назад
Awesome! Thank you! Enjoy 😊
@thuanpham5426
@thuanpham5426 11 месяцев назад
Thanks for your video. From VietNam
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 11 месяцев назад
Thanks for watching! 😁😁
@Devingulling
@Devingulling Год назад
Fantastic video and helped clear up a lot of questions I had reviewing other upgrade guides posted by Cisco.
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Appreciate your feedback ✌️😁✌️
@marcovanbrenk6951
@marcovanbrenk6951 5 месяцев назад
followed the exact procedure, on the end I still have the same software version 9200 24P 17.03.05 boot: attempting to boot from [flash:packages.conf] boot: reading file packages.conf
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 5 месяцев назад
There is some missing pls check
@pauljennings5994
@pauljennings5994 Год назад
This is a great video. Was able to upgrade our 9200's easily following this. Thanks!
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
You're welcome Buddy
@vibhavparab1989
@vibhavparab1989 Месяц назад
So very well explained. Thank you. Just a small doubt. l upgraded the IOS of 1 switch first and after that added another switch in stack without upgrading its IOS. So, will this new IOS get activated on the 2nd switch as well? Or is it that both should be in stack first and then upgrade the IOS of 1 switch and it will get activated on the other members?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Месяц назад
I never tried your scenario. But it will it built the stack properly since iOS version is different on both switches.
@ShivaKumar-pg5oi
@ShivaKumar-pg5oi 6 месяцев назад
It was a great video. But I have doubt why you gave a command no boot manual is this necessary?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 6 месяцев назад
"No boot manual" to tell the switch to boot automatically. However, this command is optional, and you can skip it. I hope I have cleared up your doubt. 😎👍😎
@skrakesh6913
@skrakesh6913 Год назад
Perfect video !! If possible please make a video for bundle mode.
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
It's already there buddy 🤩🤩 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lRKl2Kuo_20.html
@kalith
@kalith 9 месяцев назад
worked well. thank you!
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 8 месяцев назад
You're welcome! 😎😎😎
@just-ride39
@just-ride39 Год назад
Awesome video. New subscriber!!
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
More are in queue now. 😎😎
@ITnetwork5
@ITnetwork5 Месяц назад
How to rollback to old version , if something goes wrong..what is the command
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Месяц назад
@@ITnetwork5 there is no rollback of firmware in catalyst switches. Rollback only available in Nexus Family. Yes, there is a way to go back to previous version. Check this link 🔗 www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/17-1/release_notes/ol-17-1-9200.html#task_tql_4qk_5jb
@Edishanel
@Edishanel Год назад
Thanks Sir, new sub.
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
appreciate your feedback
@chimwando1
@chimwando1 2 месяца назад
just a quick one, this doesn't affect the running configurations correct?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 2 месяца назад
@@chimwando1 yes it will not effect the running configuration however strongly recommended to take backup of you running configuration. Another thing while doing the upgrade process your switch operations will be suspended because it requires reboot and update the NVRAM.
@luizeduardo7389
@luizeduardo7389 Месяц назад
Hello Hana! I want to perform an upgrade on a Catalyst 9300 currently on version 16.09.03 and ROMMON in version 16.9.1r, i want to upgrade the switch to version Cupertino-17.9.5 My question is, can i perform the upgrade in one step, or should i upgrade to an intermediate version first? And also, do i need to upgrade the ROMMON version as well?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Месяц назад
Go ahead with the recommended iOS version from Cisco. Make sure about the model of your switch.
@CookingBakingDiaries-ym9jb
@CookingBakingDiaries-ym9jb Месяц назад
Hi, can you please explain, how we can do the upgrade, if I save the .bin file in a folder in flash please? Actually our client has already upgraded the IOS from a folder in flash, and I need to upgrade it further , copying the IOS into the same folder in the flash. Would it be possible to do it from the same folder that is in the flash? Do I copy the new IOS into this folder and then carry on?Appreciate it if you can guide me. Thank you.
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Месяц назад
I already did in this way to copy IOS from USB drive to a local flash of a switch. Watch the video again and you will understand it.
@tylorbement8708
@tylorbement8708 10 месяцев назад
Do we have to change back any of the boot options or anything we changed after the upgrade?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 10 месяцев назад
No need to change any option.
@anweshengr6443
@anweshengr6443 Год назад
My switch continuously rebooting, reload reason other swieches not detected
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
First of all. All stack switches supposed to be same model and same IOS. Cross check the IOS and model. In case it’s same model and IOS then open case with Cisco to check the hardware issue. Send Cisco SHOW TECH to find the issue. Further, Stacking is not supported on switches running the LAN Lite image.
@user-mu3js8gn9l
@user-mu3js8gn9l 8 месяцев назад
hey how i know what if my switch is 24p-a or 24p-e
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 8 месяцев назад
use command " show inventory" and get the correct switch model.
@user-ip8mw6xb6l
@user-ip8mw6xb6l Год назад
How i can rest the boot variable to flash:packages.conf because in my switch it comes like this BOOT variable = flash:packages.conf;flash:cat9k_lite_iosxe.17.06.04.SPA.bin; please help me
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana Год назад
Switch Model please?
@user-ip8mw6xb6l
@user-ip8mw6xb6l Год назад
@@Advance_Technology_by_Rana Catalyst 9200L 48 PoE 4x1G
@andreaguzman247
@andreaguzman247 10 месяцев назад
Does this method work correctly with Cisco Catalyst 2960-x?
@Advance_Technology_by_Rana
@Advance_Technology_by_Rana 10 месяцев назад
Yes commands are similar. There is video for 3850 IOS upgrade as well.
Далее
Should you do the CCNA in 2024?
7:34
Просмотров 22 тыс.
An Affordable Managed Switch to Learn Networking
15:48