FIRST HDZero BNF Whoop? || Mobula7 HDZero Review

Подписаться 2,2 тыс.

Просмотров 11 тыс.

50% 1

Want to try HDZero, but don't feel like building a drone? This new BNF HDZero whoop might be what you've been waiting for. In this review, I cover the features of the Mobula7 HDZero, share my experience from flying it, and tell you why I think this is a groundbreaking product for the HDZero system.
The whoop will be priced at $180 and you can find retailers below. Selfishly, I recommend buying from GetFPV with my link :)
-------
Table of Contents:
0:41 Spec overview
4:50 Setup and pre-flight
7:38 Flight testing
10:13 Flight time (battery life)
11:17 Camera and HDZero performance
13:48 My overall impressions
-------
Where to purchase the Mobula7 HDZero:
US:
GetFPV (preorder, affiliated, supports my channel): bit.ly/3JJZBwU
DefianceRC (preorder): www.defiancerc.com/products/h...
Five33: Link TBD
AU:
PhaserFPV
BuzzFPV
EU:
DroneIt: droneit.se/product/happymodel...
Hobby-RC
ASIA:
FlySmart
-------
Don’t miss Nick Burns’ review as well: • HDZero Whoop Collab wi...
----
Links mentioned in video:
HDZero Firmware (You need the Whoop VTX firmware for the VTX in this drone): www.hd-zero.com/document
HDZero Manual: www.hd-zero.com/document
-------
⭐️Want to support my channel?
Join my Patreon: bit.ly/3KGTBVd
Also, bookmark the following affiliate links to use when you make any FPV purchase:
GetFPV: bit.ly/330Se3g
RaceDayQuads: bit.ly/31vgNEz
BETAFPV: bit.ly/3BpxRcT
MakerFire: bit.ly/3lC9Fh4
Banggood: bit.ly/3EH5WX3
-------
My HDZero Gear:
Shark Byte Receiver Module:
GetFPV: bit.ly/3EPPCm1
RDQ: bit.ly/3EtfN2B
HDZero Whoop VTX:
GetFPV: bit.ly/3eUfP8p
RDQ: bit.ly/3zEU8CZ
HDZero Race V2 VTX:
GetFPV: bit.ly/3JFoJoh
RDQ: bit.ly/3JJZFwi
Nano HDZero Camera:
GetFPV: bit.ly/3EUDPmc
RDQ: bit.ly/32K1to5
Micro HDZero V2 Camera:
GetFPV: bit.ly/333lKFf
MIPI Cables:
GetFPV: bit.ly/3zyjW3p
RDQ: bit.ly/3F2tll6

Наука

Опубликовано:

9 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@RyanQuellet 2 года назад

Great work on this review. As always, very professional

@nyclassic4ever130 2 года назад

A1 review! Been watching more and more of your vids. Taking plunge into hdzero with this little one.

@etxfpv598 2 года назад

This is basically what I've been looking for. Dollar for dollar this is a pretty good deal too. I think it's about the same price as the old Mobula7 HD but you get and HDzero cam and VTX. Very pleased with this whole package.

@dkbbass403 2 года назад

Another great video, thanks. Last week I build and HDZero using a Mobula7 HD frame, FC and motors, just added the HDZero vtx and cam plus Express LRS EP2. Flies pretty good but I would much rather have bought one ready made, neater and lighter. Cant wait to get one of these!!!

@makesomemore_ 2 года назад

Great video! Nice to see nick burns mention you!

@UnlimitedVertical 2 года назад

Wow, that looks great!

@Jephro360 2 года назад

Great video

@ronbo422 2 года назад

Great review! Do you think you could do a vid on updating the ExpressLRS version on this SPI board? I pre-ordered this quad and have just updated all of my gear to 2.0.1. I'll have to bring it up to speed with the rest of my junk.

@melshabong 2 года назад

Very nice !

@mcclarinscott 2 года назад

and I just bought a Meteor65...going to have to splurge yet again...unless the 1S VTX will also drop soon!!!would love to hand one of these to ProvoFPV in the next winter Whoop race! he is going to be experimenting with HDZero soon! I think it would shine in high RFI inside whoop races.

@jasonsuffolkuk 2 года назад

Was thinking about buying a whoop,guess its best to wait now and see what comes out with the new hd zero lite set up installed

@JEMTAC 2 года назад

excellent, subbed.

@CalleyyyC 2 года назад

Great review as always! Elrs! HDZero nano! Premium whoop right here. I love these motors, I have these exact ones on the whoop I built with similar size/weight, really great throttle control! Did I miss the pricing or TBD?

@kharmastreams8319 2 года назад

$180

@ATXAirborne 2 года назад

Yeah, it's $180 -- added to description.

@CalleyyyC 2 года назад

@@ATXAirborne thank you, quick math in my head says that is a really great price for what all you get!

@ATXAirborne 2 года назад

It is a great price, I was impressed.

@JekleFPV 2 года назад

I’m kinda hoping we get the update cable with a vtx and/or drone. I haven’t updated my gear in a while now and have no clue where I put it 😆

@thanhhieucio Год назад

can i bind this drone with Elrs 3.0 on Radio Boxer? help me

@jkwilson35 Год назад

Hi, I have the crux35 hdzero and in my display shows?.?.?. In the upper left corner what does this mean?

@pianomans1 2 года назад

Looks awesome! Do you use dji digital goggles with this setup???

@ATXAirborne 2 года назад

No, this is HDZero so you’d use either the Scout HD goggles or any FPV goggles with an hdmi input along with the HDZero/Sharkbyte receiver. If you want to learn more about the system, look at my other videos-I have several on HDZero/Sharkbyte (same system, Sharkbyte was the original name). Thanks for watching!

@hristiantodorov3923 2 года назад

I don't get Battery level as part of the telemetry on my Radio , is this normal ?

@jkwilson35 2 года назад

Hi, I just got this quad and something is wrong. I contacted it to betaflight and it says No Gyro/Acc ?

@billyd78 2 года назад

Thanks for the review. Can you please confirm the size of the battery holder? On getfpv they say it is 16x13.5mm but that doesn't sound right because every 3s lipo they recommend is bigger than that.

@ATXAirborne 2 года назад

The battery tray is about 17.5mm wide. I can't quite measure the vertical dimension accurately in the frame. However, a battery that is 16.9mm x 12mm fits (and is almost a bit loose) while a battery that is 17.3mm x 14mm is a very tight fit. I believe it's the 14mm that is a problem. I believe the recommended 3s batteries are 330mah, which are basically 3x the little 1s 330mah whoop batteries. That size should definitely fit. I'd also check out Nick Burns' review, linked in the description. He has a segment where he shows different sized batteries that fit in this whoop.

@glitchunicorn 2 года назад

nice!!

@gladiatoroverland 2 года назад

Quick questions as we are just getting into FPV and wide picked this up for me. Have tx16s controller but no goggles or transmitter. Looking to go all in with Oled goggles like the shark HDO2 and using a happy es24tx pro for my controller. Question comes what module do I need to receive best video from goggles? Is everything else comparable. Will end up moving up later to larger style for cinematic and freestyle.

@ATXAirborne 2 года назад

This is a great way to get started, I'm jealous of you starting with HDZero rather than analog :) For the goggles, OLED is going to be the best image quality. I'd strongly recommend the Skyzone Sky04X over the HDO2. They're really just better goggles at this point. You can find them here: bit.ly/3pleGeG To receive the HDZero signal with any goggles, you'll need the Shark Byte receiver module, which is this: bit.ly/3EtfN2B These are actually a little hard to find right now, I think RotorLogic may still have them in stock, but otherwise we're waiting on those to restock at the moment. Let me give you one other option. If you think you're wanting to stick with HDZero and not use analog, you could consider getting the Scout HD right now, which is a dedicated box goggle at a very low price point, and then getting the just-announced HDZero goggles when they release later this year. The HDZero goggles are in the design/prototype stage so we can't say for sure how they will be, but they sound like they could be excellent. if you wanted to go that route, the Scout HD image is definitely not as good as OLED, but it'd get you going for $250 (+ antennas) which is much cheaper than OLED+receiver. Just another option. The Scout HD is here: bit.ly/34d7Hxy I hope this helps and let me know if you have any other questions about getting started!

@Bill-NM 2 года назад

Anyone ever try 14500 lithiom ion batts? A 2S 14500 pack would weigh maybe 5-10 grams more (50-55 compared to 45-ish), but have 50% more capacity.

@theronin48 2 года назад

Want that canopy!!! Lol

@intensegamer7559 2 года назад

Hi there. Thanks for the great vid! Isn‘t the Mobula 7 the first BNF HDZero quad in general?

@ATXAirborne 2 года назад

It’s close, but Happymodel released a BNF Crux35 HDZero at the same time :)

@intensegamer7559 2 года назад

@@ATXAirborne Forgot about that one. Thx man 👍🏻

@mikemorris3229 2 года назад

I know you don't use this but I have already invested in crossfire. Are there free tx and rx pads so I can put it on there instead? Would buy now if I knew I could

@ATXAirborne 2 года назад

Yes there are! The manual will also show you a diagram of how to connect it.

@Borked_Bits 2 года назад

Worried about Happy Model build quality.. Look 1:08 and the solder work on the black wire... That looks poor. Thanks for the great review.

@nyclassic4ever130 2 года назад

Bump down to 250ghz? Is this referring to packet rate or to tx power? 🤔 so at 500 it will have problems?

@ATXAirborne 2 года назад

That’s packet rate. ELRS has had issues on the SPI receivers built into flight controllers when running at 500hz. I think it might be a bit better now and they are still working on it. It’s worth trying at 500hz, but if you encounter any strange issues, I’d try 250hz.

@corner8394 2 года назад

Thx a lot for the superb video! Diden't get the clou about how the vtx is powerd becaus i think it needs to get at lest 7v up to 26v, can you tell me how it gets his power? Thx

@ATXAirborne 2 года назад

It’s vbat from 2-3s. The vtx says 7v but it can function a bit below that. I ran my batteries down past 7v and didn’t have any video dropout at all.

@corner8394 2 года назад

@@ATXAirborne thx for the fast answering! Thats a good point because with 2s we reach fast 7v, would you recommend to add a cap and to witch range of volt would you fly?

@ATXAirborne 2 года назад

On my 2s whoops, I don’t use a cap and I fly down to 3.2v (recovers to 3.5 after landing) with no issues. Your mileage may vary of course.

@matelslug1 Год назад

Hello sir, Can I use my emax goggles to fly this hdzero quad or do I need hd capable googles to fly this quad??

@ATXAirborne Год назад

No, you’ll need goggles that have an HDMI input to use with the HDZero VRX. Alternately, you could look for someone selling the Fatshark Scout HD. Unfortunately your emax goggles won’t work with this.

@nikotttin 2 года назад

Was that a washout when recovering from the dive after the punshout? Would BF4.3 help with the tune?

@ATXAirborne 2 года назад

Yes, there is some yaw washout on the stock tune. It’s running BF 4.3 but there are some things that would help. I saw better performance with dynamic idle set to 50%, and you can also increase the motor idle percentage a bit.

@nikotttin 2 года назад

@@ATXAirborne thank you!

@Don-EfpV 2 года назад

heck yea

@Euwanh85 2 года назад

Could you link tjat 500mah 2s batt you are using please?

@ATXAirborne 2 года назад

Sure, it’s this 525mah one from RDQ: www.racedayquads.com/products/rdq-series-525mah-2s-80c-7-6v-hv-fpv-micro-battery-xt30?_pos=1418&_sid=3c5d0f970&_ss=r&aff=56

@b3owu1f 2 года назад

What antennae do I need on the HDZero receiver for this? I have V3 dominator goggles, HDZero receiver (on order). Unsure what antennae I need to buy to add to my goggles and/or receiver for video to work from drone VTX to my HDZero receiver.

@ATXAirborne 2 года назад

You can use any 5.8ghz antennas. I recommend RHCP. If you mostly fly close to yourself (inside a house, a small outdoor area, etc) you could use 4 omni antennas. If you like to fly father away, you could use 2 omnis and 2 patches. For omni antennas I like Xilo, TrueRC, Foxeer, and Lumenier. For patches, I like TrueRC.

@b3owu1f 2 года назад

@@ATXAirborne Ah ok. I saw the Lumenier stubby ones.. but it had the DJI words in it.. so made me think it's only for DJI. Wasn't quite clear if they work that way in this tech or not. I was confused also by the RHCP and LHCP. I thought maybe RH.. is two on the right side of the goggles.. and then LHCP is for two on the left side of goggles? I would ideally like the best possible for all 4 slots.. so that I can have further range and hopefully less breakup. What might be the best you can get for less breakup over say a couple 100 yards or so?

@ATXAirborne 2 года назад

@@b3owu1f Yes, if you see DJI on the antennas, be careful because DJI is almost always LHCP. You want all of the antennas to match, so all 4 of the antennas on the receiver should be either RHCP or LHCP, and if the drone has a polarized antenna, it should match too. For HDZero you can use either, but safe bet is to use RHCP antennas everywhere. This Mobula7 HDZero has a dipole, or linear, antenna, so it doesn't have a polarization and will be compatible with either. Within a few hundred yards, my recommendation would be 2 patches and 2 omnis. TrueRC recently came out with a set of patches that slide onto the rails on the VRX, which is a nice clean setup. I recently released a video on that, you can find it on the channel. A slightly cheaper option would be to get two of the single TrueRC X-Air patches and use them. Just make sure to get RHCP. For the omnis, non-stubby will give you better range since the antenna is higher up. I've been using the TrueRC OCP omnis lately, and they're a good and affordable option. You could get those or any of the other omnis I mentioned previously.

@b3owu1f 2 года назад

@@ATXAirborne Just ordered two of the RHCP TrueRC Singularity for the drones (hope those work on the HDZero 1 watt unit). I would rather spend a little more if needed to have better video at the goggles than go cheap. :)

@nodidog 2 года назад

Noob question: Do I need antennas on my Scout HD Goggles to fly this? I've never used goggles before, and I want to make sure I've got everything I need!

@ATXAirborne 2 года назад

Yes, you'll want to put an antenna on each of the SMA connectors on top of the Scout HD. Most people recommend omni antennas, which are good if you fly in all directions, including behind where you are standing. Here are two different options you might look at: Lumenier AXII (not cheap, but one of the best antennas you could get. This listing has both antennas): www.getfpv.com/lumenier-axii-2-5-8ghz-antenna-rhcp-2-pcs.html?cmid=eHZ3Y2tBWGYrQWM9&afid=WUx1YXV3SzhueFU9&ats=ZTM3dmVRQ2E0ODQ9 Stubby omni antenna (A Foxeer lollipop also would work. This is a single antenna so make sure you buy 2): www.getfpv.com/xilo-axii-stubby-sma-5-8ghz-antenna-rhcp.html?cmid=eHZ3Y2tBWGYrQWM9&afid=WUx1YXV3SzhueFU9&ats=ZTM3dmVRQ2E0ODQ9 Hope it helps! You're going to have a fun time if this is your first experience with FPV :)

@nodidog 2 года назад

@@ATXAirborne Thanks so much for this! These are actually the ones I was looking at, but I wasn't sure the quad was 'RHCP' - couldn't seem to find out anywhere (or if I even needed antennas at all). It is my first time with FPV - I've been blasting my old mobula6 around the house line-of-sight, but can't wait to get started 🥳

@ATXAirborne 2 года назад

@@nodidog Yes, you should use RHCP with HDZero. The Scout HD does have two antennas built in and they are RHCP. But you want to add the 2 additional antennas for a total of 4 antennas. That will give you the best possible signal.

@haka8702 2 года назад

HDZero is the future, given they will provide a premium vtx-cam with 1080+ resolution. I am waiting for Goggles that do Analog + HDZero, then I buy a set.

@Braincho 10 месяцев назад

What does BNF stand for?

@elliottwitt5369 4 месяца назад

Bind and Fly

@CalleyyyC 2 года назад

😲😲😲

@aythixfpv 2 года назад

Happymodel is meh as they are on quality. I'm glad they are pushing hdz and elrs sooo much. The Crux 35 is another example too.

@CalleyyyC 2 года назад

We should all be happy if they push elrs instead of FRSKY! And I only know of 2 HDZero BNFs so far, hopefully they push that a lot more given there are already so many other options out there. And personally I’d much rather fly with this video quality!

@aythixfpv 2 года назад

@@CalleyyyC sorry just reread and corrected my original post. Between a new phone and fat tumbs lol.

@CalleyyyC 2 года назад

@@aythixfpv ah makes more sense now! :)

@JohnCuppi 2 года назад

Yeah the crux35 ELRS SPI build is awesome, and now with HDZero on it coming soon.

@aythixfpv 2 года назад

@@CalleyyyC I'm vary pro hdz and elrs. I have both systems and love them.

@Euwanh85 2 года назад

This thing really eats batteries

@miguelt.7997 2 года назад

9:41 looks like horrible yaw washout.

@ATXAirborne 2 года назад

50% dynamic idle helped a lot. Saw the recommendation from Chris Rosser. All of the footage from this video was with the stock tune before changing that setting.

@neilfeatherstone824 2 года назад

I like the idea of a HD ZERO Whoop, but why in your review are you flying outside, smooth, cinematic style?... Whoops are built to race inside round tracks, this looks just like the DJI Whoop options, too heavy and built to fly like a bigger whoop... I mean who the hell buys a Mob7 and flies it round carparks, if thats your spot, buy a 3" toothpick!! pointless review and pointless drone.

@CalleyyyC 2 года назад

Go watch Nick Burns review of it, everyone knows how he flies and it doesn’t appear to hold him back, he rips it around with no problem

@ATXAirborne 2 года назад

@Calley - yep, I’m no Nick Burns :)

@CalleyyyC 2 года назад

@@ATXAirborne haha yeah me either. Apparently the ability to do a good review hinges on flight preference 🤷‍♂️