FIRST PROBLEM WITH MY NEW KIOTI AT 1.5 HOURS 😱🚜

Подписаться 212 тыс.

Просмотров 56 тыс.

50% 1

If you are buying a tractor sometimes it's just too easy to gloss over certain details. Too easy to make assumptions. Well it turns out that's the same for the dealers too! We'll tell you what we discovered, and what we need to change, on our brand new Kioti DK6010.
Good Works Tractors is happy to be sponsored by Rim Guard Solutions! This is perhaps the most well-known ballast brand on the market today. Rim Guard goes right inside your tires, so it's out of the way, it doesn't freeze, and doesn't corrode. It's made from natural materials, so it's safe around livestock and pets if it spills out. Rim Guard liquid ballast adds more weight to the back side of your tractor improving stability, loader performance, and power to the ground. Find your closest dealer at bit.ly/3d0whX0
LOOK AT OUR MOST POPULAR ATTACHMENTS!
Speeco Quick Hitch: bit.ly/3NFC0yl
Stump Wrecker: bit.ly/3WYa6Tf
VersaBracket Combo: bit.ly/3wUPrnl
Snow Pusher: bit.ly/3NB4BVw
Tillers: bit.ly/3GT1kk1
Core Plug Aerators: bit.ly/3W0R25q
Pallet Forks: bit.ly/38wRztu
Grapples: bit.ly/3PNNYaZ
Dethatcher: bit.ly/3GT9Zmk
Tractor Canopy: bit.ly/3IHcvNU
WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win!
USE CODE "GWT" TO SAVE BIG WITH:
BUCKET BRACKETS @ www.jufabworks.com
CUSTOM GRILL GUARDS @ www.5elevendesignz.com
PTO QUICK ATTACH @ tractorptolink.com
DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com
GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store
TIRE CHAINS @ www.tirechainsonline.com
PREVENT FLAT TIRES @ www.multiseal.us
CULTIPACKERS & CRIMPERS @ www.packermaxx.com
ALL OEM JOHN DEERE PARTS @ www.247parts.com
ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com
CUSTOM TRACTOR FLOORMATS @ www.tractormat.com
PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com
BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com
HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com
DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com
POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com
EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com
TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com
AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com
THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com
5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkst...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
MERCHANDISE: stores.inksoft.com/good_works...
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

Опубликовано:

22 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 146

@lukedaoutdoorguy7639 8 месяцев назад

I was the guy that reached out. Those telescoping arms come out and then they are pretty easy to grind down. Once they are off it's easy to do the test fit on the quick hitch. This quick hitch is worth the effort to make work!

@GoodWorksTractors 8 месяцев назад

Yeah, I agree...if no other solution, this is what I would have done. Thanks Luke!

@gpax-6197 8 месяцев назад

Hey brother, the width of the ball on the lift arm is the problem. Diameter is the a measure across the circular part. Still got your point and this is a good informative video 👍👍

@mattdouglas7944 8 месяцев назад

That is a very helpful video! I've thought about buying a Kioti NX and it is hard to find a used one that is Cat 1. Most for sale are Cat 2. I am now a wiser man for having watched this!

@StumpkillerCP 8 месяцев назад

Happy Thanksgiving. Whatever it takes you definitely want to get a SpeeCo quick-hitch on your three-point. Best accessory ever. Thank you Courtney & GWT.

@G.I.JeffsWorkbench 8 месяцев назад

Yep, another example of how & why it never hurts to ask. Thanks for sharing. This could have been me. Happy Thanksgiving to you & your family!

@northernhumidor5615 7 месяцев назад

Love seeing Kioti product on you’re channel.

@1ltlbrnc 8 месяцев назад

Pat's does offer the down size conversion quick hitches. I just got Pat's for my second machine and almost got the conversion units, but opted to keep it cat 2 and just use spacers so I wouldn't limit myself from using bigger attachments later if I could get a good deal. Pat's are awesome especially if you have older equipment that won't work with standard quick hitch frames.

@TheMonkdad 8 месяцев назад

You taught me something today. Thanks and have a happy Thanksgiving.

@GoodWorksTractors 8 месяцев назад

Happy Thanksgiving!

@todd9453 8 месяцев назад

Happy thanksgiving Courtney! Anything that makes it easier to hook up 3 pt attachments is worth it's weight in gold. Struggled with them for years when I was younger.

@GoodWorksTractors 8 месяцев назад

Happy Thanksgiving!

@cdub6935 8 месяцев назад

Had the same problem with my NX6010 - ended up doing the same thing

@scubatraveler100 8 месяцев назад

Happy Thanksgiving to you your family and the employees of Good Works Tractors.

@danielantman8391 8 месяцев назад

Best purchase I have made to date. Speeco quick hitch from good works. No more kicking link arms to get them to line up.

@justanotherviewer52 8 месяцев назад

Gotta love when "problems" are such a simple fix.

@GoodWorksTractors 8 месяцев назад

Haha, me too!

@lilmichaelcogburn5387 8 месяцев назад

I would love for you to do a in depth video on tractor tire chains there are lots of different ones and I’m having trouble figuring out witch ones are the best sorry I know this is not related to this videos but I’m hoping to hear your opinion about this subject thanks man for your hard work it helps a lot of us tractor owners

@GoodWorksTractors 8 месяцев назад

I do plan on it sometime soon

@1millionstartups 8 месяцев назад

Happy thanksgiving GWT family. I had similar issue when I first got a Kioti NX5510 as most commonly used implements are Cat 1 but anything 50+ hp comes with Cat 2 so no way to put on a Speeco or any Cat 1 quick attach. That’s why ended up with Pat’s Cat 2 and a Pat’s Cat 2 to 1. When I use the Cat 2 to 1 to hook up a Cat 1 implement the top link is still a little loose (needs a sleeve to take up slack around pin). Looking forward to your DK first hand perspective and testing all the implements on it.

@GoodWorksTractors 8 месяцев назад

Thanks for sharing and Happy Thanksgiving!

@PurpleNovember 8 месяцев назад

Massey has cat 1&2 on their larger compact tractors, just rotate the ball to the correct pin size and top link has a bushing.

@GoodWorksTractors 8 месяцев назад

I think utility tractors like my M4 or similar should all come with that setup

@PurpleNovember 8 месяцев назад

@@GoodWorksTractors Yes!

@oefveteran09 8 месяцев назад

If I'm right, that's what it means when a manufacturer calls the 3 point Cat 1 and 2 capable? I've always wondered how they were both, and that explains it.

@brianworley7705 8 месяцев назад

@@oefveteran09It depends. Our old early 80s Kubota M4050DT has cat 1 and cat 2. The lift arms have cat 1 on one end and cat 2 on the other with bushings. I flipped the arms for using cat 2 with our snowblower and bushings for our other cat 1 attachments, and never changed back. This is why I also don't use a quick hitch. All old non-quick hitch compatible equipment that is too expensive to replace for convenience. Experience has changed me to being a better driver to line up the hitch better and less fighting the 3 point.

@jean-philippegagnon9189 8 месяцев назад

i am commenting just to say that everytime you Kioti, it says Coyote in the subtitles and it makes me chuckle. Good day!

@backyardcountrylivin1514 8 месяцев назад

Great video, well explained. Happy Thanksgiving.

@GoodWorksTractors 8 месяцев назад

Appreciate it, Happy Thanksgiving!

@backyardcountrylivin1514 8 месяцев назад

@@GoodWorksTractors I have a 1998 MF 231 that came with cat 1 & 2 option. The balls in the link arms are interchangeable. Came with cat 1 & 2 balls from factory. There is a small pin on the inside of each arm that you can pull out and swap the balls out. That would be a great option to include from the factory on these newer slightly larger tractors that come with cat 2 and are running into this problem when wanting to use the cat 1 equipment or the quick attach as you showed.

@silverbackag9790 8 месяцев назад

Pats comes in Cat 2. I ground the ball down on a Cat 2 hydraulic top link to fit in my MX Cat 1 top link point (plus used a bushing). They were out of the cat 1 top links at the time (middle of Covid).

@GoodWorksTractors 8 месяцев назад

The Speeco also comes in cat 2. I just don’t want cat 2 on this tractor. No need for it. All attachments are cat 1.

@Ashok-sl4jf 8 месяцев назад

Great content. Looking to buy my first tractor. The Yanmar YM seems to have the ball that will fit both Cat 1 or Cat 2. Just have to swivel the ball around.

@PurpleNovember 8 месяцев назад

Nice way of being able to back and forth between cat 1&2.

@GoodWorksTractors 8 месяцев назад

Yeah maybe so

@GMC-qo9xi 6 месяцев назад

There are pins you can get that go through and extend out the (far) side on the quick hitch. Arms are then on the outside, and slide onto the pins, instead of having the pin go through like a clevis.

@dave.lawrence.3894 8 месяцев назад

Nice video.. something different about Kioti.. this is a fun one!!! Happy Turkey 🦃 day, don't eat to much!!! 😅😊

@GoodWorksTractors 8 месяцев назад

Happy Thanksgiving!

@schleppinghay 4 месяца назад

I had the same problem putting a Cat 1 land pride quick hitch on my Cat 2 New Holland workmaster 70. I just bought a pin that was threaded Cat 1 sized on one end and smooth Cat 2 sized on the other. It has a shoulder between the different diameters. I got 2 nuts and used them to lock the threaded portion into the quick hitch, with the smooth end sticking out the sides. I could just put my Cat 2 arms on those pins and place a clevis pin on the outside. Cheap, easy, and i didn't have to modify anything.

@rodbagley1686 8 месяцев назад

Happy Thanksgiving. My JD 1025 is headed to the shop Monday. Seems to have some extra mental pieces in the hydraulic fluid

@GoodWorksTractors 8 месяцев назад

Ahh that's a bummer!

@davidroberts6791 8 месяцев назад

Great video. This would look mysteriously like a mass opportunity for SpeeCo to adapt to make that channel slot a little beefier to support the Cat-2 hook-up and go larger, with the opportunities to widen that channel slot to accept the Cat-2, then to supply both the Cat-2 and Cat-1 Pins and any bushings or washer-shims for backward usage down-to the Cat-1 use when needed with the purchase as an option with an upcharge. The popularity of that cross-diverse Cat-2 & Cat-1 design of an adaptable quick-hitch would rocket sales would be a great probability. You already performed some R&D (research & development) on the concept and as you stated, there is nothing available at this time to be that cross-adaptable to your knowledge. Just a thought. Have a great Thanksgiving.

@johnhelbig7110 8 месяцев назад

See my comment I just posted. The Land Pride QH10 fits both ways.

@elwell96 8 месяцев назад

Something else to keep in mind with Kioti with the little pin hitch that sticks out, when running attachments your PTO will rub on that and ruin your plastic cover on your PTO. It happened to me so I just took it right out.

@GoodWorksTractors 8 месяцев назад

Thanks for the tip!

@simpleman4196 8 месяцев назад

I have a cat 2 hitch factory on my 5 series Deere with the telescoping links just like you have. I was able to put the cat 1 quick hitch on with no problem I just had to put bushings in

@GoodWorksTractors 8 месяцев назад

Yeah same with my M4. Sort of a hybrid, not true cat 2 by definition

@SledgeHammer43 8 месяцев назад

My tractor supply has the Cat 2 bushings and pins in stock most of the time. One day I will get a compact tractor to start my business with.

@oefveteran09 8 месяцев назад

When I ordered the CK2610 I had them toss on telescopic links, and then I tossed Pat's EZ Change on there and they work awesome together. Typically I don't need to adjust them, but when I make a mistake in my judgment they have proven very forgiving lol.

@GoodWorksTractors 8 месяцев назад

Nice! Happy Thanksgiving!

@oefveteran09 8 месяцев назад

@GoodWorksTractors Happy Thanksgiving to you as well! I prepped a turkey last night, and yet somehow still briefly forgot what day it was. 🤣

@andrewsamanthamadison3320 8 месяцев назад

Happy Thanksgiving to y’all, what made you choose the DK over the NX or NS?

@davidcomunal7798 8 месяцев назад

I see some mfg have a bushing in them that have both cat 1 and 2 size holes maybe you could find those it would be a great item to stock as well as im sure others run into this problem as well I enjoy your content Thanks

@GoodWorksTractors 8 месяцев назад

Yeah, but unsure how you would swap out the ball ends on the 3 point arms? Happy Thanksgiving!

@farmhand3724 8 месяцев назад

Your point is about the Speeco but I solved that problem with a Land Pride QH16 Cat I quickly hitch mounted to my Kubota MX5400 Cat II 3 pt hitch with the reducer bushings. That’s the only one I found where the lower connector channels were wide enough to accept Cat 2 mounts. Land Pride designed the QH16 to mount to both Cat 1&2 hitches but only mounts to Cat 1 implements.

@GoodWorksTractors 8 месяцев назад

The red Speeco in this video also fits the MX as well. It has nothing to do with it being Land Pride brand. The balls on the MX are narrow enough to fit in the cat 1 hitch. I’ve got videos on my channel of the red Speeco cat 1 on an MX6000.

@jeffmcquinn3430 8 месяцев назад

I believe JD 4052m and 4066m HEAVY DUTY versions have links that the balls can rotate to CAT 1 or 2. I thought about putting them on my 4066r

@waynetanguay6640 8 месяцев назад

I am confused. I have a MX with the cat 2 lift arms and use a cat1 speeco quick hitch.. I had to cut down the bushings but it works great.

@christophercarr8717 8 месяцев назад

Seems like a simple change to the box of the quick hitch receiver if you couldn’t change the cat 2 to a 1

@Bigtoolrack 8 месяцев назад

Good information!

@GoodWorksTractors 8 месяцев назад

Happy Thanksgiving BTR!

@Bigtoolrack 8 месяцев назад

@@GoodWorksTractors same to you Buddy!

@danielmeyer403 8 месяцев назад

I have not measured the width of my JD 5075E Cat 2 ball ends but they fit in the i-match quick hitch that's on there now and I use reducer bushings to adapt to the Cat 1 pin size. Either the Kioti ball end is bigger, the Speeco is smaller, or both than Deere.

@GoodWorksTractors 8 месяцев назад

Deere has narrower ball ends. Kioti is a true cat 2. Seems odd, but that’s the way it is

@user-wy5li8lj4j 6 месяцев назад

With the top link is a cat l - cat ll. The end on the tractor is cat l the end that goes to your implement is cat ll. Or at least that's how my dk5510 came. Most all the dk`s I've seen in my are come with the cat ll hitch on them even if the don't have expendable links.

@richc9890 8 месяцев назад

Massey has both size holes in those rotating spheres (opposite of each other). I am not sure on the width of the arms, but if they work for the Category 1, then the cat 1 holes must be at the correct size.

@jamieebersole6755 8 месяцев назад

Someone needs to build a quick hitch that is like some of the attachments that have both cat 1 and 2 side by side. I think this is going to be a more common problem with the higher hp compact tractors. The machine size is more in line with cat 1 but the hp is in the cat 2 implements

@tractorrookie 8 месяцев назад

Sounds like they are going to take care of you! That’s what matters. 😅

@colinlawrence6403 8 месяцев назад

I have a Kioti rx6010pc witch is a cat 2 , I put a Patts quick hitch that goes cat 2 to 1

@sylvainlaliberte510 8 месяцев назад

I did with my John Deere 5075e with Imatch cat 1

@ProductiveRecreation 8 месяцев назад

Kinda nice you can just change the ends and go from cat 1 to cat 2 on that machine. Wouldn’t break the bank if you ever wanted or needed cat 2 instead.

@slowride55 8 месяцев назад

Pat’s does offer a CAT 2 to 1 option.

@GoodWorksTractors 8 месяцев назад

Nice, I don't like Pat's...it's like a partial solution. Suppose it's better than nothing for some though.

@sylvainlaliberte510 8 месяцев назад

Courteney use a Quick hitch cat 1 de John deere Imatch and put a bushing cat 2 to cat 1 and cut the bushing same size of the inside the Imatch

@CentralNH 8 месяцев назад

I prefer pats easy hitch because I borrow some attachments and a regular quick hitch messes with the PTO shaft length.

@GoodWorksTractors 8 месяцев назад

So does Pats.

@MrElmesk 8 месяцев назад

I have a Kubota MX5400 and it has Cat2 extendable links. My Speeco ehitch fits no problem with a cat2 to cat1 bushing. No grinding required. I am guessing that the width is thinner than the Kioti version.

@GoodWorksTractors 8 месяцев назад

Yes, same with my Kubota M4. Same with the Kubota L6060. They are kind of a hybrid. These are true cat 2 balls on the Kioti.

@PeteRaine972 8 месяцев назад

Huh... I'm always dealing with the reverse issue... need cat 2, and most times that used attachment is only tiny cat 1

@williegardner9290 8 месяцев назад

First off Happy Thanksgiving to you and your family. Now on to the question, I have 45+ acres of wooded land. I need to clear a road back to the 4 acre area I plan for a house and food plot. Ai am looking at getting a KX-075-5 0r a Yanmar VIO-55 may VIO- 80 which one would be better? I know the Kubota stuff have used them before. I am looking at price and power, never did anything with Yanmar, My friend who has a construction business uses them and will not change said they are the best. Looking for outside info, I am also planning to do the clearing myself, I am retired from the business so know how to do it and want to.

@jerrycrafton9388 7 месяцев назад

I have the same problem. I bought your quick hitch but it will not fit my tractor. On my Massey 2860 at the end of the lift arm it has a ball that you can turn for cat 1 or 2 but the ball is too wide to fit the quick hitch. Grinding them down is the way to go.

@bammbamm1961 Месяц назад

your video helped me to purchase a Kioti NS - love my NS, thank you - but dumbass here (me) I have one operation challenge. When running the PTO in Auto, i am fine with the run when lowered and off when raised auto setting - but for the life of my I can't get "Manual" to work... What am I doing wrong?

@tronstone7679 8 месяцев назад

Do you sell front fenders for Kubota b series?

@plainwornout3964 8 месяцев назад

At 4:19 the left rear tire looks like it's crooked, leaning right at the top. Don't know if it's the camera or not but it also looks crooked with the axle. I own a Kioti myself, DK45. Thought you might investigate and I hope I'm wrong.

@richardweihert6233 7 месяцев назад

Good sir, "ID" can mean both Inside dimension or inside diameter.

@mrmichaeltscott 8 месяцев назад

The no bushings is Gigantic.

@Frontpagefab 8 месяцев назад

Those rear tires don't seem very wide. Does the tractor feel stable?

@GobblerK5_2WR080 2 месяца назад

Oh just ship that quick hitch to me to use on my CK2620HST...then you won't have to trip over it and remind yourself about the boo boo each time you encounter it in the shop. Lol

@mikes21348 8 месяцев назад

WRT cat 2; I have a cat 2 PATS. I wouldn’t recommend it because it’s hard to find a top link that is long enough offset the longer lower link arms.

@GoodWorksTractors 8 месяцев назад

Sorry to hear that

@Ramdodge582 7 месяцев назад

need a top & tilt kit on there

@rafterh2181 8 месяцев назад

I just modified my hitch wasn't hard at all ......just a little cutting and welding

@johnhelbig7110 8 месяцев назад

My Kubota MX4800 has the extendible Cat 2 end upgrade on the lower arms also. My cat 1 Land Pride QH10 quick-hitch is made with extra material in the mounting area (about 2” wide) so that the cat 2 tractor arms fit right in. Only needed the cat1-cat2 sleeves. So Land Pride is more money but is engineered to fit the tractor correctly. Perhaps Kioti sells a quick hitch that fits correctly also. I don’t know but again, a question to ask of the tractor manufacturer. Thank you for your videos. I’m a 3rd generation tractor dealer, ultimately spending 32 years as a dealer principle in a small Ford New Holland and Kubota dealership before retiring.

@GoodWorksTractors 8 месяцев назад

The reason it fits is because the MX balls are narrower than a full size cat 2 ball. Land Pride does not built a quick hitch to specifically fit the MX. The red Speeco cat 1 hitch in this video will also fit on the MX. I’ve put them in there myself. I have videos on my channel of an MX6000 with the Speeco cat 1 hitch on it.

@JCWren 8 месяцев назад

Is the top link still cat 1 or was that changed when they added the cat 2 links? Cat 1 is 7/8" pin and 18" over center while the cat 2 is 1" pin and 24" over center.

@GoodWorksTractors 8 месяцев назад

Good question, I'm not sure. I can definitely fix that on my own if needed. Just by going to buy a cat 1 top link.

@danahilliard5985 8 месяцев назад

Had Same Problem Bought CAT one Quick Hitch My Massey Ferguson is Cat 2 Ended up returning Quick Hitch

@GoodWorksTractors 8 месяцев назад

Happy Thanksgiving!

@dickjordan5168 8 месяцев назад

My Land Pride Quick Hitch on a B2301 Kubota fit just fine on all my cat 1 implements with no bushings.

@BizzaroTractors 8 месяцев назад

I think there may be a few tractors where the ball swivels between cat1 and cat2. I can't remember the brand. I wonder if the cat1 ball will fit the quick hitch.

@PurpleNovember 8 месяцев назад

Massey does and the cat 1 should fit because there’s flats on both sides where they narrowed it.

@GoodWorksTractors 8 месяцев назад

Yeah there are. Utility tractors could definitely use this. No need for me to use cat 2 on this tractor though.

@Noah_E 8 месяцев назад

My dad's New Holland Boomer 40 has the rotating balls and telescoping end links to accommodate both Cat 1 and 2.

@PurpleNovember 8 месяцев назад

@@GoodWorksTractors Totally agree! Cat 2 only implements start getting pretty big for a tractor that size.

@stewartalison733 8 месяцев назад

I have a Landpride quick hitch QU15 it accepts category II tractor hook up into the quick hitch

@GoodWorksTractors 8 месяцев назад

Not a true cat 2

@markromano1458 8 месяцев назад

Great content as usual however, is this really a Kioti issue or more of a dealer issue? I say that because it sounds to me like they were shipped from the factory set up correctly however, the dealer trying to appease the customer made the change that created the content for this segment. Happy Thanksgiving Have a happy Thanksgiving.

@GoodWorksTractors 8 месяцев назад

It was still a problem with my Kioti tractor. Happy Thanksgiving!

@chief1193 8 месяцев назад

You should try out a Yanmar tractor

@sylvainlaliberte510 8 месяцев назад

I did with my 5075 e

@malcolmlinch9681 8 месяцев назад

You have to cut off the pins and weld the size on you want. You have to do with each piece

@GoodWorksTractors 8 месяцев назад

That would be the last method I would suggest, but would certainly do it

@malcolmlinch9681 8 месяцев назад

@@GoodWorksTractors I did see a company that made the arms coming out that you change the steel ball with the hole in it. You could go up or down in one pin size. I don't know who the company was anymore since I don't have that problem

@tcmits3699 8 месяцев назад

Articulated lifting arms are better than telescoping and/or QH set up.😊 In the real world, just my opinion

@michaelhess4825 8 месяцев назад

My SpeeCo QH doesn't work with my 5' box blade. Kinda useless when there appear to be no standards on dimensions with attachments. Now I need to sell the QH, more trouble than it's worth! Pats is not a solution either, still need to do top bar, which is why I bought the QH in the first place, to save effort and my old back.

@GoodWorksTractors 8 месяцев назад

There are standards for quick hitches and quick hitches compatible attachments. Most manufacturers follow these criteria. Very old attachments often aren’t as they were from before the quick hitch era. Sometimes foreign and often very cheap attachments ignore this simple requirement. It doesn’t cost more to make them quick hitches compatible. It’s either ignorance or lack of concern for the customer.

@michaelhess4825 8 месяцев назад

@@GoodWorksTractors yeah, it's from Behlen Country. Just bought it. Literally the only brand sold within 200 miles of me. Their support basically laughed at me for using a QH. Super not impressed.

@brianworley7705 8 месяцев назад

@@GoodWorksTractorsI agree there are standards for quick hitches. However the standard is broad enough that a QH manufacturer can make their hitch at one end of the standard and an implement manufacturer on the other end of the same standard and not be able to use the two together. Doesn't happen too often, but enough times that consumers have gotten caught in the scenario described above. So yes, MOST of today's manufacturers follow the standard, the question is where in the standard they choose to manufacture their product(s)?

@kencotton4645 8 месяцев назад

Why not keep the cat two and buy the cat one adapter, so you can use both as needed.

@woodman8261 8 месяцев назад

Does John Deere have the 3 pt up grade for a 2025r?

@GoodWorksTractors 8 месяцев назад

Don’t believe so

@VBCJesusSaves 8 месяцев назад

Could have just used some Cat 1 bushings and called it a day. Kudos to whoever sold it to you for upgrading to the Cat 2. So you're really going to downgrade and send those back? Just use some Cat 1 bushings - they're cheap! BTW, just go with the Pat's quick hitch. They're so much more versatile if you've got multiple implements with varying widths.

@pc5569 8 месяцев назад

Isn't the DK6010 equivalent in size to a grand L or a 4R?

@GoodWorksTractors 8 месяцев назад

Much smaller. Closest in physical size is the John Deere 3r Series. Significantly smaller footprint than a 4r. Kubota L3560 is fairly close.

@donbrutcher4501 8 месяцев назад

Why not just get a cat II quick hitch?

@GoodWorksTractors 8 месяцев назад

All attachments I use for that machine are cat 1.

@donbrutcher4501 8 месяцев назад

My Kubota L6060 is a cat II hitch.

@GoodWorksTractors 8 месяцев назад

But you can use a cat 1 quick hitch. I've installed them on the L6060 for customers.

@donbrutcher4501 8 месяцев назад

My 3 pt attachments are all combination Cat 1 and II with only one exception. In that case it is cat 1 and I use bushings.@@GoodWorksTractors

@nicktrago7274 8 месяцев назад

anything 50 hp and up comes in cat 2

@GoodWorksTractors 8 месяцев назад

I have bought 100’s of tractors that are 50HP and greater which had cat 1. That includes the John Deere 4066r and 4720 that have been featured on the channel.

@ctskidoo 8 месяцев назад

So it's not a " Kioti" problem its more a user induced problem

@GoodWorksTractors 8 месяцев назад

Agree to disagree, Happy Thanksgiving!

@oefveteran09 8 месяцев назад

How so, sportsfan? Did Courtney specify or install the wrong size himself? Seems at worse a communication error on the part of the dealer. Even then, it's not some big issue, it's a matter of swapping parts.

@garymeyer3294 8 месяцев назад

If a Cat 1 lift arm came as standard on the Kioti, then it's not a Kioti problem.

@oefveteran09 8 месяцев назад

@@garymeyer3294 seems a dealer problem to me. 🤷‍♂️

@rawwetzel 8 месяцев назад

Are you talking with not diameter?

@GoodWorksTractors 8 месяцев назад

I don't understand the question.

@Itsa_Mea 8 месяцев назад

Yes, WIDTH, not Diameter. Pretty obvious if you watch the video. He just misspoke.

@Itsa_Mea 8 месяцев назад

@rawwetzel, you mistyped like he misspoke. 😊

@rawwetzel 8 месяцев назад

Wow just asking a question to be clear.

@donCesc19 8 месяцев назад

I'm amazed that americans still use imperial system of mesurement even because they failed at 1/3 pounder vs 1/4 pounder burgers.... It's just confusing... in metric you know 20 is lower than 22.... higher number vs lower....

@Donnie_G_TheBigGuy 8 месяцев назад

BFH 😂

@justloggit22 8 месяцев назад

Mahindra has the 2 in 1 ball for either or… industry should get in lock step on this and quit fooling around with swapping your whole link end out kinda ridiculous at this point.