First Start! × 4BT Cummins Discovery #35 [Land Rover Build] 

*Skip to the start-up? [Click here > **15:39**]* _NOTE: I'm swapping the Valvoline for Redline MT85 due to a mixup with trans suppliers recommendations. Because as it turns out that SynPower stuff is "iffy" for the NV4500, but the Redline oil's on point with New Venture's (the trans manufacturer) specifications_ 👍

IT had to happen but nothing is ever guaranteed. I've had the pleasure of hearing a 6.3 V8 GMC diesel in a 110 Land Rover and a 3.5 litre 4BTD Isuzu in a classic Range Rover as well. So well done sir! Now show us how to close the lid...looking forward to that bit as well as when you use it in anger.

I love that DeBoss garage shirt you have! Congrats!

Rebirth. Awesome job.🍻

The smiles and grins on your face says it all well done

You don't know how much i v waited for this moment, my heart raced like it was gonna come right out, I love the turbo sound and the engine sound so full of life, I envy you man!

6:53...bless you bud...pretty good size sneeze there

Rocking the Deboss Garage shirt, nice. His channel brought me to yours a couple months ago. Will eventually be swapping my 6bt into something soon hopefully. Keep up the good work my friend. 👌

Dam man congratulations finally running

Wish I had the talent you have for this. I have a 2002 and 2003 Disco and the gas engine in them are problematic. Looking forward to seeing this beast off road.

Now that’s what I’m torquing about...! That engine sounds great and revs really well. I feel sorry for the drive shaft joints when you put all that torque through them. 😆 I cannot wait to see it drive... Well done to you👍🏻

CLEAN so far.... I would clearance that pan, and use an Allen type plug. Flush fitting, would go well with how clean you've done this build. Amazing work dude!!!!!!

I love the effort you put in to the video and the vehicle, its inspiring.

Oh man thats what im talking about , sounds like a tractor and it sounds good for me!! Greeting from Finland! Love your work!❤️

I've recently found your channel, man I love your work. I'm learning a lot from your videos which helps me with my builds.

Wooo woooo. that feeling is priceless

Turned out so awesome! I’m excited to see the wild adventures with the disco. Amazing work!

That's so Awesome! Congratulations on a job well done.

Wonderful. Funny, entertaining but as usual the attention to detail is so high. I had no doubt it would start and sound awesome. Congratulations

Good job man! We're expecting for a firts tests on road, off road... 👍🏻👏🏻👏🏻👏🏻

Incredible work on this whole build, Seriously! There's a right way and a wrong way to do everything, and you've done it all right. Spectacular build, I hope it takes you to fun times and cool places. Cheers mate

Sounds awesome. All that hard work you put in is paying off. Can’t wait for the total completion and some videos on the trails.

That’s art !!!!!!!!!

Super happy to see this thing running finally, ready to see it on the road

You could make a big ol skid plate and put it under

I thought I saw gear oil going in the trans. Just make sure it's the right fluid the synchros in the nv4500 need a special fluid. As amsoil makes a pretty decently priced alternative to the dealerships

I watched every video in this series without fast forwarding once. Awesome that it’s running!

Nice work man

I've been watching many build up and first start videos. That commitment on checking all is preoiled/primed shows you all are focused on best handwork and engine care.

Some people never experience this much joy finnaly seeing some of the the payoff from all that hard work.

The greatest moment in a build. Thanks for that!

I only regret that I have but one like to give for this video. That is awesome. I am going to have to watch again on a bigger screen. Thanks for bringing us along on this project. Looking forward to seeing you finish and get to drive it for the first time.

So happy for you !!! I've been following this build since the beginning you've done a wonderful job !! An inspiration to the diesel 4x4 comunity !!

Alright man!!! Sounds cool, can’t wait till first drive!

This thing is so freaking badass! It was mine and I could add one more thing to it, I'd a C.T.I.S. (C-central T-tire I-inflation S-system) to it which would just put it over the top and make it better than all of your friends vehicles. It would also make it so much more capable in any and all terrain you put it through. For those who don't know what C.T.I.S. is well it's a central tire inflation system which allows you to deflate or inflate your tires from inside the vehicle. So if you are off-roading and end up in a area with a lot of rocks that you didn't plan on, then you can deflate you tires to give better traction but also once past that obstacle you will be able to reinflate the tires. Another great feature you get with C.T.I.S. is run flat, where if you puncture a tire and can't repair it or don't have a spare you can press the emergency tire button which pumps air into that specific tire constantly to keep it inflated so you can get to a area to fix it or change it. The military uses it on most of their vehicles and since they do it makes it easier to find a whole kit from say a junk yard or eBay for pretty cheap. Oh yeah 1 other thing I would definitely add as well is portal axles. Which are found on unimogs for a solid axle or you can find independent portal axles on military Hummers. What is a portal axle? Well it's basically a axle with a extra gear box at the end where you Mount the tires which not only gives you a 30% gear reduction but also drops the wheel hub up to 6inchs lower which in return pushes the axle.upward giving you a extra 6 inches of ground clearance from the axle. Whit having a extra 30% gear reduction takes some of the strain off your engine and transmission helping them run cooler so you can also run larger tires without over working the engine and transmission. You can also change the gearing to give more reduction but less wheel speed for like rock crawling or less reduction for a higher wheel speed. Okay I'll stop here lol sorry for the long ass comment but when I start talking about 4x4,s and off roading I tend to not stop lol just very passionate about it. Thanks for reading this and have a great day.

Can't wait to see it drive

Congrats on the first flash ! Now we want a roadtest ! Nice shirt at 14:50 ! hopefully Rich says hello.

Your Discovery will be brilliant once it's finished, maybe the best around.

Good to see that smile and happiness on your faces after all that hard work

Congrats! I’ve been following along since the beginning and this is awesome to see.

Hell yeah love that Cummins sound, you had me hooked since the beginning think of putting one in my Chevy luv how the the vibration?? I forgot if you used solid engine mounts or liquid based ones? Also if you dont need that supercharger laying on the floor I'd gladly put it on my 2v v6 mustang 😂 keep up the great work!!

Congratulations man!!!! I have watched since the beginning. Such an amazing feeling and you have done a solid build

So great dude! Congrats on the first start, can’t wait to see this in action

Congratulations to ya. I have a 6AT turbo Cummings in my 59 Landrover Series II,88. I also put a NV 4500 transmission. Still trying to squeeze more MPG out but getting 20MPG now.

Nicely done!, Very clean, love it...like the squirrel voices too.....now it's my turn to get this done..

Congratulations bro! Truly amazing work!

One of the best builds i have been following on RU-vid, keep it up!

Those cummins just sound so damn good.

you looked good, you are keenly detailed, there is no doubt that when you like your work, you do an excellent congratulations

So good. And the genuine excitement when something goes right! Awesome!!

Dude so exciting! Amazing work.

Congrats, man. It’s been really fun watching this build.

Well done mate. I've been enjoying your videos of this project and it does inspire me to get on with my own Land Rover! Tom, from England

I see your picture is of Michigan. Glad to see someone building something badass in the mitten state. I’m from Kalamazoo myself.

I watched the first episode, said I was gonna keep up on watching them. Forgot and just saw this. Great job man, super clean you definitely did your research and learned this engine

Oh yeah, all those little details!! Thank you for the great content 😄

That's a big milestone! Congrats!

Well done very glad to your success...looking forward to the sequel

Absolutely love it man! This is goals for my truck!!

Black smoke!!! Up!!

It’s alive...IT’S ALIVE!

Great job! Outstanding work and very entertaining and inspiring.

BEAUTIFUL. I would love to fit one of those 4BT in my old 64 Scout. I hit the like button a few more times when the coal started rolling in the disco.

Sweet sound! We love those engines here in Argentina..!

What a Beast! Cant wait to watch it pull down mountains ;). Cheers for sharing mate.

It has arrived!!

Dude! So crisp on that restart . So happy for ya man. Great job.

Hahaha the look on your face when it starts. So pumped for you!

That thing is sweet. Nice job on the build.

Well done Tinker! You've been patiently building a quality rig and are that much closer to taking her out. 🍺 Cheers bud!

To freakin cool guys! Love the build.

That’s such a nice engine. Good job

You can light up a stadium with those lights. Nice! 👍🏻😎

Awesome man congratulations!

Congrats dude, been ticking for this moment. Can't wait to see the modded hood. Wooohooo

Congratulations!!! Great stuff

Milestone! Congrats, sir!

This is great guys, I miss my Disco!

I wish I could do this on my series. Very beautiful turnout.

Man!!that was freaking awesome that's one nice rig you got there!!!!!!!! Congrats

Congrats bro!

Amazing men, felicidades! You make an awesome job and it looks bad ass. 😎

Gorgeous work. Enjoy.

Biggg dayyy, congrats from Istanbul, Turkey, following your dedication.

She sounds gooooood!!! Well done!

Badass! Only words I got are badass and I’m jealous! Make more vids of that beast!

I watch all ur vedios from the start, congats very nice project thumpss up

Outstanding work brotha

Parabéns!!! Que trabalho maravilhoso você está fazendo nesse carro.

Amazing project

amazing. True dedication here.

that things gonna be some fun.

GREAT WORK LOOKS AND SOUNDS GREAT!!

So satisfying. If you have kids and are married, I'm sure this was close to being the happiest day of your life. Definitely giving them a run for their money.

Sounds good, that black smoke tho.

Congratulation man 🎉🎉

Awesome work guys

Great job man!

very beautiful sound.

That's a mad engine bro love it